Smart Zone Sensing With Auto Breaking System Using ARM Student Name USN NO Guide Name H.O.D Name Name Of The College & Dept

CONTENTS Abstract Objectives Block diagram Methodology Advantages & disadvantages Applications Conclusion

1.ABSTRACT: The goal of the proposed system is to protect the environment and surrounding from the hazardous conditions of the vehicles. The system is mainly performing the work of smart zone sensing and auto breaking. This system is performed using automation with the help of RF technology.  

2.OBJECTIVES: Effective in implementation. Low power consumption, and compact size. High reliability, due to the usage of power semiconductor devices. Greater control range due the usage of Frequency Modulation with a PC. Vehicles monitored from a remote area (no need of 'line-of-sight’ arrangement).   .

3.BLOCK DIAGRAM :

4. METHODOLOGY: A general block diagram of the proposed scheme is given in Figure . In the Module there is Vibration & poisonous gas Detector, when the vibration or & poisonous gas is detected the it gives the signal to the MSP 430 controller, then the controller will generate the output that is fed to buffer IC 4050 ,buffer stores and given to the driver IC 2003 in driver current will amplifies and voltage will inverts with the help of Darlington pair circuit of driver IC to drive the relay . Then signal is given to the output load buzzer for indication purpose .

5. ADVANTAGES & DISADVANTAGES: More useful in remote areas. Firing events more help full to save. This project we can operate Easily  Can be used globally.   

DISADVANTAGES: Under the mine the personal safety of staff problem. Personnel positioning problem

6.APPLICATIONS: 1.Can be adequately implemented in national defense through military-industrial partnership. 2.Can be vastly applied in Resorts, borders of noted buildings. 3.Installation of combat robots in the stadiums, sacred places, government and non government organizations assures top security.

7.CONCLUSION; This System has been successfully designed and tested. It has been mainly designed in order to avoid accidents and to alert the drivers about the speed limits for safe traveling. Many existing systems has discussed about the road safety’s and has proposed many methods for the speed limitations and accident detections. Controlling the vehicle speed automatically in real time is very difficult. So, in order to avoid that difficulties, instead of controlling the vehicle speed automatically, our project succeeded in alerting the driver about the speed limits and detecting accidents.  

THANK YOU