Arcturus empower embedded. How To Setup Asterisk On the MCF54451 DRAFT – VERSION 0.5 January 6/08

Arcturus empower embedded. Starting Asterisk 1. Log into board: freescale login: user Password: user 2. Change to super user $su root Password: root 4. Start Asterisk #asterisk -vvvvvvv Asterisk debug verbosity 3. Run following (manual) # modprobe mcf_wcfxs # ztcfg Autostart Note: For convenience a script example has been created: /etc/rc.d/init.d/asteriskd Page: 2

Arcturus empower embedded. Asterisk Initialization Asterisk , Copyright (C) Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ============================================================= ============ Asterisk Ready. # Page: 3

Arcturus empower embedded. Logging Into Web UI Username: admin Password: admin IP address of board Page: 4

Arcturus empower embedded. GUI Initialization Asterisk GUI will run some autoconfig Page: 5

Arcturus empower embedded. GUI Home Page Trunk Status System Status Extension Status Setup Menus APPLY CHANGES – VERY IMPORTANT Page: 6

Arcturus empower embedded. Trunks and Extensions Trunks –Connect with external telephony elements –FXO port (Si3050) is an analog trunk that connects with PSTN Extensions –Act like users on the phone system –May be digital or analog –Digital may be IAX / SIP or Analog –FXS (Si3210) is an analog extension that connect to a POTS (plain old telephone service) phone Page: 7

Arcturus empower embedded. Configuring an FXO Trunk 1. Select Trunk Menu 2. Click: New Analog Trunk 3. Check FXO hardware channel (2) 4. Name trunk: FXO 5. Click add 6. APPLY CHANGES APPLY CHANGES – VERY IMPORTANT Page: 8

Arcturus empower embedded. Confirming the FXO Trunk 1. Select Status Menu Page: 9

Arcturus empower embedded. Configuring an Extension To configure an extension you need to: 1.Create a dial plan 2.Create a User –Setup number –Define the type of extension (SIP/IAX/Analog) –Select the capabilities (3WayCalling/in- directory/call wait…) Page: 10

Arcturus empower embedded. About the Dialplan The dialplan defines the rules that are assigned to each user. These rules define how outgoing calls will be handled. It can be used to restrict calling or route calls in different ways based on the number dialed (least cost routing). The dialplan also defines the number of digits and starting number for extensions, parked calls, conferences, voice mail ….. Page: 11

Arcturus empower embedded. Creating a Dial Plan 1. Select Dial Plan Menu 3. Use default Settings 4. Click Save 5. APPLY CHANGES APPLY CHANGES – VERY IMPORTANT 2. Click New Dial Plan Page: 12

Arcturus empower embedded. Making the Dial Plan Default 1. Select Dial Plan Menu 3. Check Default Box APPLY CHANGES – VERY IMPORTANT Page: 13

Arcturus empower embedded. Creating a SIP user 1. Select User Menu + click create new user 2. Define Name 3. Select dial plan 4. Enable voic 5. set password 6. Select SIP Only 7. Confirm u-law 9. Define capabilities APPLY CHANGES – VERY IMPORTANT 10. Click update 11. APPLY CHANGES 8. Set Password to extension number Page: 14

Arcturus empower embedded. Configuring Zoiper PC SIP Client 1. Click tools icon 2. Add new SIP account 3. Enter Server IP 4. Enter User Account and password User Account Information Username: 6000 Password: Click OK Page: 15

Arcturus empower embedded. Confirming Success 1. Green Light! 2. Registered! 1. Select Status Menu Page: 16

Arcturus empower embedded. Setting Up an Analog Port (FXS) Set up user as described before Configure for an Analog Station on Port-1 Page: 17

Arcturus empower embedded. Creating an Analog User (FXS) 1. Select User Menu 2. Define Name 3. Select dial plan 4. Enable voic 5. set password 6. Select Analog Station: port-1 7. Confirm u-law APPLY CHANGES – VERY IMPORTANT 9. Click update 10. APPLY CHANGES 8. Define Capabilities Page: 18

Arcturus empower embedded. Confirming Success 1. Green Light! Page: 19

Arcturus empower embedded. Disabling Echo Canceller Page: Select Options Menu 2. Select “Show advanced options” APPLY CHANGES – VERY IMPORTANT ADVANCED OPTIONS ARE DISPLAYED HERE 3. Select “File Editor”

Arcturus empower embedded. Disabling Echo Canceller Page: Select zapata.conf file 2. Expand Channels menu 3. Click on List to open editor FILE EDITOR IS DISPLAYED HERE

Arcturus empower embedded. Disabling Echo Canceller Page: Edit echocanel=no 3. Save & Apply changes APPLY CHANGES – VERY IMPORTANT

Arcturus empower embedded. Notes 1.After you have configured hardware you will need to restart Asterisk for the hardware to init properly # killall asterisk 2.After you have reset Asterisk your SIP client will need to register with Asterisk to work properly (unreg/reg the zoiper client or wait for re- registration) Page: 23