1. INSTALLATION HANDS-ON

2. Page 2 About the Hands-On This hands-on section is structured in a way, that it allows you to work independently, but still giving you the possibility to consult step-by-step instructions. Each given task will be divided into two sections Actual Task Conditions, goals and short instructions Allowing you to work independently Detailed instructions (step-by-step work through) In case you can not come up with own solutions

3. Page 3 Task Overview 1.Policy Manager deployment (incl. PMS, PMC and AUSYS) 2.Console initialization and initial configuration 3.AVCS 6.x rollout

4. Page 4 Infrastructure Your environment consists of two computers Windows 2003 Standard Server (SP3) Windows XP Professional (SP2) Network 100 Mbit Ethernet, supporting TCP/IP C-class network (192.168.100.0/24) XP Pro SP2 2003 Server Root Update Server

5. Page 5 Task 1 Install Policy Manager with all necessary components (not FSAVCS yet) on a single computer Is such an installation possible in this environment? Once you have a clear plan how to proceed, install the products and configure it as follows Limit access to the PMS admin module to local host (use the default ports during installation) If needed, the next pages will provide you with a step-by-step walkthrough => After installation is completed, continue on to page 19 XP Pro SP2 2003 Server Root Update Server

6. Page 6 Policy Manager Installation Walk-Through Insert the F-Secure Product CD (old screenshot!) Select ”F-Secure Policy Manager”

7. Page 7 Policy Manager Installation Walk-Through Choose the installation language Click “Next”

8. Page 8 Policy Manager Installation Walk-Through Read the F-Secure License Terms and accept the agreement Click ”Next”

9. Page 9 Policy Manager Installation Walk-Through Accept Custom installation Click “Next”

10. Page 10 Policy Manager Installation Walk-Through Also here accept default selections Click “Next”

11. Page 11 Policy Manager Installation Walk-Through Default installation path C:\Program Files\F-Secure is fine Click “Next”

12. Page 12 Policy Manager Installation Walk-Through There is no old Policy Manager installed, so accept the default Click ”Next”

13. Page 13 Policy Manager Installation Walk-Through Accept the default Port Numbers Click ”Next”

14. Page 14 Policy Manager Installation Walk-Through Select F-Secure Anti-Virus Client Security 6.x Click ”Next”

15. Page 15 Policy Manager Installation Walk-Through Necessary setup information has been collected. System is ready for installation Click “Start”

16. Page 16 Policy Manager Installation Walk-Through Installation in process. Do not restart the system until 100 % completed Might take some minutes

17. Page 17 Policy Manager Installation Walk-Through Components have been installed Click “Next”

18. Page 18 Policy Manager Installation Walk-Through Installation finished successfully Click “Finish”

19. Page 19 Task 1 Completed F-Secure Policy Manager is now installed Check the Server Status Start/Status Monitor Both Apache modules should have Status: OK Web Reporting Module will still show an error, because we didn’t initialize the console yet Initializing and configuring the console will be your next task

20. Page 20 Task 2 Initialize and configure Policy Manager Console Start the Console and go through the initialization process After that, configure the console as follows Rename the Root domain to F-Secure Restrict all user settings (try to find the easiest way) Define the Policy Manager host communication address Note: The address defined during the console initialization is the administration module address Change the server polling interval to 10 seconds (incoming and outgoing requests) Distribute policies! Task continues on next page…

21. Page 21 Task 2 Perform a general system check Are all modules working properly? What does the status monitor say? Try out the web reporting, does it work? Try to complete this task independently If needed, next pages will provide you with a step-by-step walk through => If you managed to complete this task, continue on page 36

22. Page 22 Console Initialization Walk-Through Start Policy Manager from Start menu for initialization Click “Next”

23. Page 23 Console Initialization Walk-Through Select Administrator mode Click “Next”

24. Page 24 Console Initialization Walk-Through Accept default Click “Next”

25. Page 25 Console Initialization Walk-Through Select the location of the key-pair. Defaults are ok. Click ”Next”

26. Page 26 Console Initialization Walk-Through Create administrator’s cryptographic keys Move the cursor until the next dialogue box appears

27. Page 27 Console Initialization Walk-Through Enter the administrative password. Use “password” in this hands-on Click “Next”

28. Page 28 Console Initialization Walk-Through Click ”Finish”

29. Page 29 Console Initialization Walk-Through First Policy Manager Console launch By default, Policy Manager Console is run in the Anti-Virus Administration mode (AV mode) Policy Manager is now initialized and ready to use Next step is the console configuration and first policy distribution

30. Page 30 Initial Console Configuration Walk-Through Rename the root domain Right-click the root domain Select Domain/Host Properties Rename “Root” to “F-Secure” After that start fine tuning the communication settings Click Centralized Management tab

31. Page 31 Initial Console Configuration Walk-Through Prevent user from changing most important settings Click “Do not allow users to change settings…”

32. Page 32 Initial Console Configuration Walk-Through Define communication settings Set Policy Manager Server address (IP address of your PMS computer) Set both polling intervals to 10 seconds

33. Page 33 Initial Console Configuration Walk-Through Distribute the Policy, select File/Distribute (or press CTRL + D)

34. Page 34 System Status Check Overall Check the status of the Policy Manager Server From the start menu: Start/Programs/F-Secure Policy Manager Server/Status Monitor The Web Reporting error should now be fixed

35. Page 35 System Status Check (Optional) Web Reporting Open Report web interface From the start menu: Start/Programs/F-Secure Policy Manager Server/F- Secure Policy Manager Web Reporting

36. Page 36 Task 2 completed Policy Manager initialization and configuration has been finalized The next task will be F-Secure Anti-Virus Client Security 6 rollout XP Pro SP2 F-Secure PMS / PMC Root Update Server

37. Page 37 Task 3 Install AVCS 6.x on your client computer running Windows XP SP2 Is the installation possible without any changes to the host? Any conflicting software installed on the target system? Which rollout method is best suited for this environment? Which methods are possible? Is there a firewall installed on the host preventing certain rollout methods? Task continues on next page…

38. Page 38 Task 3 Once you have a clear plan on how to rollout AVCS 6.x, and you have checked all issues mentioned on the previous page, go ahead with the rollout Try to complete this task independently If needed, the next pages will provide you with a step-by-step walk through => If you managed to complete this task and your client has rebooted, continue on page 61

39. Page 39 Pre-Rollout Checks Check your target host for installed conflicting software Check if there is conflicting software installed on the computer If there is, check if that product is automatically detected and removed by F-Secure Sidegrade Function Important: Always check all your hosts for conflicting software before your start any rollout

40. Page 40 Pre-Rollout Checks If the XP Firewall on your host is enabled: F-Secure Intelligent Installations requires certain inbound traffic allowed on target host (TCP 135 and 445) Try to connect to the ports from your PMS Open the command prompt and telnet the ports There will be no response, so you need to allow the above mentioned protocols on your target host Try to come up with a solution, without disabling the firewall!

41. Page 41 XP Firewall Configuration Configure XP SP2 firewall exceptions Allow “File and Printer Sharing” Press “Edit” Enable SMB only (TCP 445) Disable all other ports Create a new service and allow RPC Press “Add Port” Name: RPC, Port number: 135 Confirm by pressing OK

42. Page 42 Remote Installation Walk-Through Select ”Installation” tab on the editor pane Click “Autodiscover Windows hosts…”

43. Page 43 Remote Installation Walk-Through Select your target host from the list Click “Install”

44. Page 44 Remote Installation Walk-Through Select F-Secure Anti-Virus Client Security 6.x Click “Next”

45. Page 45 Remote Installation Walk-Through Check that F-Secure Anti-Virus for Client Security 6.x is the only selection Click “Next”

46. Page 46 Remote Installation Walk-Through Include the policy from your root domain “F-Secure” Click “Next”

47. Page 47 Remote Installation Walk-Through Accept the default domain account Domain administrator account will be used to access the target host Click “Next”

48. Page 48 Remote Installation Walk-Through Check the installation details, correct if necessary (“Back” button) Click “Start”

49. Page 49 Remote Installation Walk-Through Click “Next”

50. Page 50 Remote Installation Walk-Through Instructor will provide you with the correct keycode After typing the keycode, click “Next”

51. Page 51 Remote Installation Walk-Through Install Virus Protection, E-mail scanning and Internet Shield Click ”Next”

52. Page 52 Remote Installation Walk-Through Select the language the product will use Click “Next”

53. Page 53 Remote Installation Walk-Through Choose centrally managed installation Click “Next”

54. Page 54 Remote Installation Walk-Through Specify your Policy Manager Server’s URL Click “Next”

55. Page 55 Remote Installation Walk-Through No need to add a custom property at this stage Click ”Next”

56. Page 56 Remote Installation Walk-Through At this point you will be able to choose whether to remove conflicting software automatically Accept the default setting Click “Next”

57. Page 57 Remote Installation Walk-Through Select “Restart after installation, in” Change the countdown to 1 minute Type a reboot message Click “Finish”

58. Page 58 Remote Installation Walk-Through Wait while Intelligent Installation creates the distribution package This step might take some minutes (depending on your system) Do not press “Cancel”

59. Page 59 Remote Installation Walk-Through F-Secure Setup will start and install AVCS 6.x to your computer Wait until the Reboot message appears on your screen Don’t reboot yet, minimize the window

60. Page 60 Remote Installation Walk-Through The ”Installation progress” window shows you if the installation has finished successfully Close this window Also close the autodiscover wizard window Distribute policies! Close Policy Manager Console On the other computer, open the reboot dialogue again and click reboot

61. Page 61 System Status Check After the reboot Open F-Secure Anti-Virus Client Security 6.x by double-clicking the F-Secure icon in the system tray Click “Central Management” Check Last connection and Policy file counter

62. Page 62 Task 3 Completed Congratulations! You have successfully finished the Installation hands-on F-Secure AVCS 6 F-Secure PMS / PMC Root Update Server