1. Connect(register) old KX-HDVxxx to HTS824(HTS32) by manual operation (sample case: old KX-HDV130 that does not support automatic registration )
1st release: Sep. 27th 2016

2. Contents
1. Caution (automatic restart on KX-HDVxxx by automatic up-date)
2. KX-HDVxxx firmware version.
3. Sample situation/condition for old HDV130 registration to HTS824 by manual.
4. Set-up sample on KX-HTS824 side
5. Set-up sample on KX-HDV130 side
This document for connecting old KX-HDVxxx SIP phone to KX-HTS824(HTS32) with sample case. However, in case of old firmware (HDV100/130 V1.063 and older, HDV230 V1.012 and older), it will be better to up-date them at first. Then, you can up-date them from HTS824 operation easily from next time.

3. 1. Caution (automatic restart on KX-HDVxxx by automatic up-date)
If network allow (direct or through PBX) to connect Internet, KX-HDVxxx phone will start automatic firmware up-date via re-direction server after factory reset on KX-HDVxxx (or start-up 1st time), by several automatic restart. During the up-date process, please do not make factory reset on KX-HDVxxx. Otherwise, up-date program on HDVxxx is damaged by the operation and HDVxxx cannot start-up correctly.

4. 2. KX-HDVxxx firmware version.
Following version can be registered to HTS824(HTS32) automatically in same network after just factory reset on KX-HDVxxx.
HDV100/130: V1.064 and later
HDV230: V1.013 and later
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
Status
Firmware version
Menu
System Setting
Following version cannot be registered to HTS824(HTS32) after factory reset on KX-HDVxxx.
This document show how these HDVxxx register to HTS824. However, it is better to up-date HDVxxx at first. Because above-mentioned version allow that HTS824 show HDVxxx as up-date target device for easy way.
HDV100/130: V1.063 and older
HDV230: V1.012 and older

5. 3. Sample situation/condition for old HDV130 registration to HTS824 by manual.
HTS824 IP address:
HDV130 (static) IP address:
PC IP address:

6. 4. Set-up sample on KX-HTS824 side (page 1 of 3)
Change from analog port (default) to SIP port

7. 4. Set-up sample on KX-HTS824 side (page 2 of 3)
Change from analog port (default) to SIP port
SIP User Name: ID for SIP phone Password: Please assign (12345)

8. 4. Set-up sample on KX-HTS824 side (page 3 of 3)
Reason why “PBX access port” on HDVxxx side have to be changed to “33824”.

9. 5. Set-up sample on KX-HDV130 side (assign static IP address)
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
Network Setting
IPv4 Setting
Menu
System Setting
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
IP address
Subnet mask
Static OK
Panasonic KX-HDV130
Panasonic KX-HDV130
In some cases, LLDP may have to be set disable. You can change this setting through HDVxxx Web programming.
LLDP
LLDP
OFF

10. 5. Set-up sample on KX-HDV130 side (make Web program to enable)
Panasonic KX-HDV130
Panasonic KX-HDV130
Panasonic KX-HDV130
Basic Setting
Other Setting
Menu
Panasonic KX-HDV130
Panasonic KX-HDV130
Embedded web
Embedded web On

11. 5. Set-up sample on KX-HDV130 side through Web page
(EXT.number) 119
(Change PBX access port to)33834
(PBX ip address:)
(SIP user ID:) phone-019
(password:) 12345

12. 5. Set-up sample on KX-HDV130 side through Web page
If LLDP is not used by network, please change LLDP to No.
In some cases, LLDP may have to be set disable.

13. Up-date history
Sep. 27th 2016: 1st release