Senior Design Project Prepared for: Dr. Koutsegeras Advisor: E. Rode Prepared by: Joshua Price 12/1/2011
Abstract My project is designing a two-story office/apartment. Will require knowledge gained through ET courses. Outside studies will be done to learn such topics as autocad. Project will include all aspects of construction From design to scheduling Project to be broken into six deliverables Schematics design Preliminary working drawings Construction drawings Budget/cost analysis Estimate schedule 12/1/2011
Problems Autocad Design of steel structure Foundation plans Took longer to get acquainted with than planned Still getting the hang of some things Design of steel structure Foundation plans Need to figure out what foundation will be required to support structure 8/31/2019
Design Overall building dimension is 36’ x 56’ The building will be 2 stories with a loft 1st Floor layout There will be an office in the front Behind the office will be a half bath, full bath, and laundry room Only the first half of the 1st floor will be enclosed The back half will be open and consist of an outdoor kitchen and an outdoor shower 8/31/2019
Design cont’d 2nd Floor layout In the front, there will be a bedroom, closet, and bathroom The rest of the 2nd Floor will be pretty much open with a living area, dining area, and a kitchen area There will also be a loft above the 2nd floor Not sure, but planning on putting it above the kitchen and dining areas There will also be a balcony that wraps half way around the right side and across the back overlooking the pool 8/31/2019
1st Floor- Floor plan 8/31/2019
2nd Floor- Floor Plans 8/31/2019
Loft 8/31/2019
Right side elevation 8/31/2019
Left side elevation 8/31/2019
Front side elevation 8/31/2019
Backside elevation 8/31/2019
Deliverables So far I have done all the way up to the preliminary drawings Next semester: Final Construction Drawings Will include final steel design, electrical, plumbing, stairs, slab info., etc. Budget Cost Analysis Estimate Schedule 8/31/2019