Presentation is loading. Please wait.

Presentation is loading. Please wait.

Intro to CAD Final Exam Review. Identify two rooms that make-up the quiet zone of a house.

Similar presentations


Presentation on theme: "Intro to CAD Final Exam Review. Identify two rooms that make-up the quiet zone of a house."— Presentation transcript:

1 Intro to CAD Final Exam Review

2 Identify two rooms that make-up the quiet zone of a house.

3 Quiet Zone The quiet zone includes bedrooms and bathrooms

4 Identify this bathroom design

5 1/2 bath

6 Identify this kitchen design

7 U-Shaped Kitchen

8 Identify this kitchen design

9 Corridor Kitchen

10 Identify this house style

11 Victorian

12 Identify this house design

13 Garrison

14 Identify one benefit of a one-story ranch design

15 Identify another benefit of a one-story ranch design

16 Ranch Design Benefits Lends itself to indoor-outdoor living and due to the lack of a staircase is ideal for the elderly and handicapped

17 Identify this bathroom design

18 Full bath or Master bath

19 Identify this bathroom design

20 3/4 bath

21 Identify two rooms that make-up the service area of a house.

22 Service Area About 1/3 of the house is dedicated to the service area, which includes kitchen, laundry room, and garage.

23 Elaborate on the garage to kitchen location for proper traffic circulation in a house design

24 Garage to Kitchen The garage should be near and direct to the kitchen for moving groceries

25 Identify this kitchen design

26 Straight Kitchen

27 Identify this kitchen design

28 Island Kitchen

29 Identify two rooms that make-up the noisy zone of a house.

30 Noisy Zone The noisy zone includes the kitchen, garage, laundry room, etc…

31 Identify this house design

32 Ranch

33 Identify this house design

34 Cape Cod

35 Elaborate on traveling through the house for proper traffic circulation in a house design

36 Traveling through the House Few rooms should have traffic flow planned through them

37 Identify two rooms that make-up the living area of a house.

38 Living Area About 1/3 of the house is dedicated to the living area, which includes living room, dining room, foyer, family room, patios, decks, and terraces.

39 Elaborate on the foyer’s location for proper traffic circulation in a house design

40 Foyer Location The foyer should be centrally located and convenient to all parts of the house.

41 Identify this house design

42 New England Gambrel

43 Identify this house design

44 Salt Box

45 Identify this kitchen design

46 Peninsula Kitchen

47 Identify this kitchen design

48 L-Shaped Kitchen

49 Elaborate on location of the bedrooms to the bathrooms for proper traffic circulation in a house design

50 Bedrooms to the Bathrooms All bedrooms should be close to a bathroom

51 What is the Americans with Disabilities Act (ADA)?

52 The ADA law makes discrimination against disabled persons illegal in: Employment Public and private transportation Access to public and commercial buildings

53 Identify this house design

54 Southern Colonial

55 Identify this house design

56 Contemporary

57 Identify two rooms that make-up the sleeping area of a house.

58 Sleeping Area About 1/3 of the house is dedicated to the sleeping area, which includes bedrooms, bath, dressing rooms, and nurseries.

59 What scale is most commonly used in a residential floor plan?

60 1/4 of an inch What scale is most commonly used in a residential floor plan?

61 Eleven features should be included on any floor plan. List four of them.

62 11 Floor Plan Features Stairs Walks, Patios, and Decks Room Names Material Symbols Location & Size Dimensions Drawing Scale Exterior & Interior Walls Size & location of Windows & Doors Built-in Cabinets & Appliances Permanent Fixtures

63 Before laying out the exterior walls of your house using Chief Architect, what two preliminary steps should be taken?

64 2 preliminary steps 1.Determine house requirements 2.Sketch floor plan

65 What is the purpose of a floor plan?

66 Floor Plan Purpose Heart of a set of construction drawings One plan to which all construction workers refer

67 Doors and windows serve numerous functions. List three of them.

68 Door & Window Functions Admit light from the outside. Provide fresh air & ventilation. Help create an atmosphere inside. Add detail, balance and design to the exterior of the house. They shield an opening from the elements. Add decoration and expand visibility. Emphasize the overall design. Provide light and ventilation.

69 What percentage should glass area represent on the floor area of any room?

70 20 percent What percentage should glass area represent on the floor area of any room?

71 Last Round

72 What is the primary purpose of an elevation drawing?

73 Elevation Drawing Purpose Show the finished appearance of a given side of a building and furnish vertical height dimensions.

74 Four exterior elevations are usually required for a home. Name them using the preferred designation

75 Elevation Designations 1.Front 2.Rear 3.Right Side 4.Left Side

76 End Good luck on the final


Download ppt "Intro to CAD Final Exam Review. Identify two rooms that make-up the quiet zone of a house."

Similar presentations


Ads by Google