1. ET 494: Senior Design Design of a New Hammond Head Start Center
By: Cody Menard and Taylor Bishop
Instructor: Dr. C. Koutsougeras
Advisor: Mr. R. Edward Rode

2. Completed Work
We developed a design for a Head Start Center in Hammond, La.
We completed floor plan drawings, and elevation drawings, using Auto-cad. Also, we found the building and fire codes, the site location, and began the preliminary building estimate.
This building will be 9,000 square feet, including multiple rooms such as: classrooms, bathrooms, offices and other specific rooms.

3. Site Location 20368 E. Highway 190 Hammond, La. 70401
2.63 acres of cleared land
Priced at $399,900
Ideal location. Located within a couple miles of Hammond Eastside Elementary Magnet School.
Also, multi-family homes surrounded making it a close destination for many.
Located directly on Highway 190 allowing for easy traffic flow.

4. Building Codes
The building codes come from the Hammond Zoning Ordinance booklet. The codes we are using are from these areas.
Part 1: Principles and Objectives
Part 3: Schedule of District Regulations Adopted
Part 5: Off-Street Parking and Loading Requirements

5. Fire Codes
The fire codes were taken from the NFPA 101: Life Safety Code booklet. The edition used was from NFPA stands for National Fire Protection Association. The main codes are from the following chapter’s sections.
Chapter 26: New Building Occupancies
Section General Requirements
Section 26-2 – Means of Egress Requirements
Section 26-3 – Protection

6. Site Location (cont.)

7. Elevation Point 1 – 33.2 ft Point 2 – 35.0 ft Point 3 – 36.4 ft
Base Flood -

8. Ground Work Existing ground only Leveled to a height above flood zone
Slope away from building

9. Preliminary Floor Plan

10. Preliminary Elevation Sketches

11. Preliminary Elevation Sketches

12. Exterior Finishes
Walls and Roof:
Aluminum
Front Entrance
Brick Veneer

13. Preliminary Estimate $16 - $20 per square foot
This covers the cost of a very basic rigid frame, commercial Steel building on average.
Preliminary estimate on just steel exterior and outer cover:
$144,000 to $180,000

14. LEED Certification
Leadership in Energy and Environmental Design (LEED)
LEED v4 for BD+C: New Construction or Major Renovation
Levels of Certification
Certified: points
Silver: points
Gold: points
Platinum:

15. LEED Certification
To obtain points, LEED has developed a checklist broken into 7 different categories:
Location and Transportation
Sustainable Sites
Water Efficiency
Energy and Atmosphere
Materials and Resources
Indoor Environment Quality
Innovation

17. Spring 2016 Proposal
Our goal this semester is to build upon last semester’s work toward the completion of this project. In doing so, we hope to prove our real world readiness to our colleagues and mentors through the use of programs such as AutoCAD and Primavera along with Microsoft Office.

18. Working Drawings Base Floorplan Electrical Plan Joist Plan
Foundation Plan(with details)
Ceiling Joist/ Rafter Plan
Final Elevation
Site Plat Plan(with drainage)

19. Estimate
Floor
Concrete
Ceilings
Finished Walls

20. Schedule
Primavera

21. L.E.E.D.
Look into L.E.E.D. improvements for our building.

22. Deliverables Spring 2016 Feb.1-5: Prepare for proposal presentation
Feb : Working Drawings: base floor plan and kitchen
Feb : Working Drawing: electrical plan
Feb. 29- Mar. 6: Working Drawings: Floor joist and foundation w/ details
Mar. 7- Mar 13: Working Drawings: Ceiling Joist and Rafter plans
Mar. 14- Mar. 20: Look into LEED improvements
Mar. 21- Mar. 24: Start estimate on concrete
Apr. 4- Apr. 10: Estimate on floor and finished walls and ceiling
Apr. 11- Apr. 24: Scheduling using Primavera
Apr. 25- May 1: Scheduling using Primavera
May 1- May 6: Prepare for final presentation

23. Any Questions?