1. NEW MEDICAL FACILITY BUILDING By: Vincent Cannatella and Shelbi Remy Advisor: Edward Rode Instructor: Cris Koutsougeras ET 494 - Senior Design II

2. LAST SEMESTER  Our senior project will involve a complete the development of a theoretical medical building.  Last semester we completed the preliminary floor plan and elevation drawings using AutoCAD, established the building and fire codes, determined a site location, and began the preliminary building estimates.

3. PRELIMINARY FLOOR PLAN DRAWINGS  The building will be 2,378 square feet.  15 rooms

4. PRELIMINARY ELEVATION DRAWINGS

5. BUILDING AND FIRE CODES  The building codes come from the Hammond Zoning Ordinance booklet.  Part 1: Principles and Objectives  Section 1.3 - Commercial  1.306  Part 3: Schedule of District Regulations Adopted  Section 3.8 – C-1 Commercial District  3.805  3.806  3.807  Part 5: Off-Street Parking and Loading Requirements  Section 5.3 – Commercial  5.301  Section 5.6 – Off-Street Loading Requirements  5.601  The fire codes came from the NFPA 101 Life Safety Code booklet.  Chapter 26: New Building Occupancies  Section 26-1: General Requirements  26-1.7  Section 26-2: Means of Egress Requirements  26-2.1.1  26-2.3.2  26-2.4  26-2.6  26-2.8  Section 26-3: Protection  26-3.3.1  26-3.5

6. LOCATION  The location is on Professional Plaza  Near downtown Hammond and I-12 interstate  Two adjacent lots  0.5 acres for $99,000  0.75 acres for $125,000  Total lot size and price  1.25 acres  $224,000

7. PRELIMINARY BUILDING ESTIMATE  $125 - $150 per square foot  Based on similar buildings and within the same region  Building materials only  Does not include equipment, decorations, etc  Preliminary estimate cost: $297,290 - $356,700

8. THIS SEMESTER  Working drawings using AutoCAD  Quantity take off  Elevation survey  Project schedule using Primavera

9. WORKING DRAWINGS  We will first revise our preliminary drawings into working drawings.  We are currently working on the floor plan working drawings. More detail and measurements will be included in the final drawing. It will also include door and window schedules.

10. QUANTITY TAKE-OFF  Quantity take-off is part of the estimating process of the project.  A take-off for materials only will be done.

11. PROJECT SCHEDULE  A schedule will be made for the process of construction this building.  We will use the Primavera software in order to create a PERT chart, which is a Program Evaluation Review Technique.  It is basically a flowchart of each task needed to complete this building.  This is an example of what it will look like.

12. ELEVATION SURVEY  A survey will be taken of the location using elevation points.  These points will consist of a 25’ grid pattern across the whole property.

13. TIMELINE/DELIVERABLES Week 18/24/15 – 8/28/15Discussed what we did last semester and what is expected for this semester Week 2-38/31/15 – 9/11/15Work on proposal document and presentation Week 49/14/15 – 9/18/15Revise preliminary drawings and begin working on the working drawings Week 59/21/15 – 9/25/15Finalize working drawings using AutoCAD Week 6-89/28/15 – 10/16/15Begin estimation for materials Week 910/19/15 – 10/23/15Finalize quantity take-off Weeks 10-1210/26/15 – 11/13/15Begin project schedule using Primavera Weeks 13-1411/16/15 – 11/27/15Begin elevation survey Week 1511/30/15 – 12/4/15Prepare final document and presentation

14. ANY QUESTIONS?