REGISTER a COMPUTER Online BEGIN

simulated PRACTICE This exercise is an interactive tutorial using Microsoft® PowerPoint Show (.ppsx) to simulate an online environment. You will be guided step-by-step through the process necessary to register a computer (or multiple computers) for CASAS eTests Online at the local test center. All computers identified as a testing station must be registered. START

https://etestsonline.org/ 1. Type this Web address in your browser window: https://etestsonline.org/. For this exercise, Click in the address bar, then continue. Continue

2. Click “Tests.” This will download the secure browser application.

3. Click “Run” when prompted. Wait for the program to load.

3. Click “Run” when prompted. You may be asked twice, depending on your browser settings. If the secure browser downloads successfully you will go directly to Station Management Login. Wait for program to load.

4. First Person Enters Login Credentials. Each station must be registered by two certified individuals – two Test Center Coordinators or one Test Center Coordinator and one Test Center Proctor. For this exercise, the Test Center Coordinator should Click each field to enter: Agency = “A2,” User = “Coordinator1,” Password = “Trial1.” A2 Coordinator1  Click “Login.”

5. Select “Site.” This is the building location of the computer in which you are registering. For this exercise, click in the combo box and select “Two - Site 1” from the drop-down menu.

Test Center TC01 6. Enter “Lab.” 7. Enter “Station Name.” This is the room at the site location of the computer in which you are registering. For this exercise, Click the field to enter “Test Center.” Test Center TC01 7. Enter “Station Name.” This is the name of the computer in the room at the site location in which you are registering. For this exercise, Click the field to enter “TC01.” Click “Register” when finished

8. “Another user must confirm this registration!” This pop-up message should appear after the Test Center Coordinator Clicks “Register.” The status for registering the computer changes from “Not Registered” to “Pending.” Click “OK” to return to the Station Management Login.

You can either Click “Exit” now to close the application or continue which requires a second person with credentials to login. This is a security measure so CASAS knows that two certified persons have identified this machine for CASAS testing. Continue

9. Second Person Enters Login Credentials. Now you need the second person to register this same computer. For this exercise as the Proctor, Click each field to enter: Agency = “A2,” User = “Proctor2,” Password = “Trial2.” A2 Proctor2  Click “Login.”

Test Center TC01 10. Second Person Confirms Computer Registration. The computer registration status will change from “Pending” to “Registered” after the second confirmation. Click “Register.”

11. “Station Registered!” This time the pop-up message should say: “Station Registered!” Click “OK” to go to the Welcome Screen.

The Welcome page will instruct you to wait for a session to start. Select to “Exit” and proceed to Schedule a Test Session. You may schedule a test session from another registered computer and leave this screen open until the test session starts.

Register a computer This concludes the practice exercise to register a computer for CASAS eTests Online. You will perform these steps as a certified coordinator assigned to a test center approved for administering CASAS eTests Online. You may “Repeat” this exercise or “End” this exercise now. REPEAT END