Value Series LED Drivers Kevin Boyce Director of Product Management, LED Drivers

Value Series LED Drivers Settable LED Driver 120-277V input voltage Low profile plastic housings Class P / UL Listed Class 2, constant current output High Efficiency 0-10V dimming to 5% Dim-to-Off Class B EMI at 120Vac only Class A EMI at 277Vac Class 1 and Class 2 control wiring Dip-switches for easy current adjustment 4 output current settings per driver KSP KSP KSP KSP Initial Launch In Development INTERNAL ONLY

Value Series LED Drivers Settable LED Drivers for Linear Applications Two Output Voltage Windows 18-28V One driver with four output current settings Targeted for 2x2 luminaires using two modules Works with two 32 LED V-Series modules wired in series or two 56 LED V-Series modules wired in parallel 35-52V Three drivers each with four output current settings Targeted for luminaires using four modules Works with two 56 LED or four 32 LED V-Series modules wired in series or four 56 LED V-Series modules wired in series-parallel Driver Operating Ranges: Voltage Current (mA) Initial Launch In Development INTERNAL ONLY

Value Series LED Drivers Settable LED Drivers for Track and Downlight Applications Designed around 36Vdc COBs 24-42V Output Voltage Three drivers each with four output current settings Small form factor housing convenient for track lighting Can also be used with two 56 LED V-Series modules wired in series, three 32 LED V-Series modules wired in series or one 72 LED V-Series module Targeted for luminaires using four modules Works with four V-Series modules wired in series Class 1 and Class 2 control wiring Dip-switches for easy current adjustment 4 output current settings per driver Driver Operating Ranges: Voltage Current (mA) Initial Launch In Development INTERNAL ONLY

Value Series LED Drivers Selectable Output Current Each driver has four output current settings that can be selected via dip switches located on the bottom of the driver. The dip switch diagram is located next to the dip switches and it is also shown on the specsheet The driver is shipped set to the maximum output current Excerpt from App Note EVD12: Selectable Output Current LED Driver Instructions The white squares on the dip switch diagram represent the handle of the dip switch. In the adjacent configuration for 850mA, the white squares have been circled in green to highlight the handle of each switch. To set the driver to 850mA, the handle of switch one should be moved down towards the number 1 and the handle of switch two should be moved up towards ON. In this example, the handles of both dip switches have been moved towards ON. The dip switch diagram shows that when the handle of both switches are moved towards ON, the driver will provide an output current of 900mA. Close up view of the diagram on the D900C46UNVSL-GC Everline LED Driver. INTERNAL ONLY

Value Series LED Drivers Compatible Modules The Value Series LED Drivers will work with the V-Series modules, M2 modules, standard ULT modules and 36V COBs App note EVS12 V Series Linear System Configurations has been created as a reference for using the Values Series LED Drivers with the 32 LED and 56 LED V Series modules FAEs can use the existing module calculators to provide customer specific details Possible Module Configurations with Value Series LED Drivers: Linear Drivers Downlight Drivers INTERNAL ONLY

Value Series LED Drivers Key Features vs Competitive Product Feature Advantage Product Family Value Series CertaDrive Current Select Typical Efficiency 90% - 92% at 40W 90% - 92% at 30W 85% - 87% at 20W 87% - 88% at 40W 87% - 88% at 30W 87% - 89% at 40W 86% - 88% at 30W Minimum Dimming 5% of tuned value 5%, 10%, non-dimmable 10%, non-dimmable Output Current Range 4 Settings per driver None 3 Settings per driver Output Voltage Range 10-18Vdc per driver 12-13Vdc per driver 16-26Vdc per driver Programming Method Dip Switches N/A Shorting connectors Dim-to-Off Yes, 1W standby power No EMI Class B at 120Vac, Class A at 277Vac Class A at 120Vac and 277Vac, options for drivers with Class B at 120Vac Class A Country of Origin China Mexico Housing Small plastic case T8 N-can Short C-Can Risks: The Value Series LED Drivers offer more features than Philips CertaDrive or Osram Current Select INTERNAL ONLY

Value Series LED Drivers Value Series vs PW Series Feature PW Series Value Series Typical Efficiency 86% - 87% at 40W 86% - 87% at 30W 82% - 84% at 20W 90% - 92% at 40W 90% - 92% at 30W 85% - 87% at 20W Control Wiring Class 1 or Class 2 Minimum Dimming 1% of tuned value 5% of output current selection Output Voltage Range 16-56Vdc Various 10-18Vdc ranges Programming Options Output Current, Dimming Curves, Dimming Values Selectable Output Current Programming Method RFID Dip Switches Dim-to-Off Yes, 2-3W standby power Yes, 1W standby power EMI Class A at 120V and 277V Class B at 120V and Class A at 277V The Value Series LED Drivers are a great offering when precise dimming is not required INTERNAL ONLY

Value Series LED Drivers Pros and Cons Pros and Cons of the Value Series LED drivers Dimming Pro - the Value Series LED drivers are dimmable down to 5% of each output current setting. Con – the minimum dimming level is fixed at 5% and the tolerance will yield products with 5-7% minimum dimming. Tuning Pro – the Value Series offers the ability to select one of four output currents per model. Con – the tuning is done by dip switches. These are small switches that are not as user friendly as NFC tuning, but they can be set with a small flat-head screw driver (no special tools required). INTERNAL ONLY

Value Series LED Drivers Pros and Cons Pros and Cons of the Value Series LED drivers Efficiency Pro – due to the smaller output voltage range and the larger tolerance on output current, the Value Series will have efficiency that equals or exceeds the PW drivers. Con – larger tolerance on output current allows for more variation in light levels unit to unit comparison. Note: this higher output current tolerance performance matches what is available from the Philips CertaDrive. Overall Performance Pro – the Value Series LED Drivers have passed our standard validation and reliability tests. Con – the Value Series LED drivers have wider tolerances in output current and higher flicker (not visible) than our PW drivers. Note: this lower performance matches what is available from the Philips CertaDrive. INTERNAL ONLY

Value Series LED Drivers Pros and Cons Pros and Cons of the Value Series LED drivers Packaging Pro – drivers are packaged in plastic trays of 6 units with 5 layers for a carton quantity of 30 units keeps costs down. Con – order quantities will be in multiples of 30 for OEMs. Warranty Pro – the Value Series LED Drivers will have our standard 5-year warranty. Con – the Value series will not have the option for a 10-year warranty. Cost Pro – the Value Series LED Drivers will have a lower selling price than the PW series of LED drivers. Con – the cost of a Value Series LED driver is more dependent on current/power levels than the PW. There will be less of a gap between Value series and PW drivers at 1A than at lower currents. INTERNAL ONLY

Marketing Resources The formal launch e-blast will sent out Oct. 19th Feel free to forward the e-blast to your customers. Collateral PDFs will be available on www.unvlt.com. Product Flyer Spec Sheets To support the launch of the new drivers, these tactics (among others) will be in play… LED Selector Guide App Notes Press Release Social Media Blueprint/PESLA Newsletters Presentation Library

Questions? INTERNAL ONLY