1. Lighting Retrofit Assembly (LRA)
Distributor Training

2. LED Distribution Products
1. Component Upgrade
(Stock/Flow Components)
I-Pack Drivers
Provide value to channel with easy to use cross ref system, QuikCross.
Project
(Made to Order)
2. Basic Upgrade
(Stock/Flow Projects)
LED Retrofit Options
Tube + Ballast
Tube + Driver
LRK Retrofit Kit
LRA Retrofit Assembly
Sign Tube
Distributor Stock
Distributor Stock
& Home Center
3. Fixture Upgrade
(Renovation Projects)
Prismatic Troffer
Volumetric Troffer
Strip Luminaire
Wall Pack
Vapor Tight
Industrial Bay
Parking Garage
Wrap Luminaire

3. LRA Overview
Family of pre-assembled LED retrofit kits mounted on strip fixture panels. Available in a single 4’ panel configuration or two 4’ panels wired in tandem for 8’ strip fixture retrofits.
Pre-mounted and pre-wired to further save installation effort and cost. Panels are designed for universal compatibility with multiple strip fixture manufacturers.
Additional conformal coating allows for expanded applications in typical strip fixture locations – parking garages, unconditioned spaces, outdoor canopies
Lumens Colors
2, K
3, K
4, K
4,600
6,000
8,400
Assembly includes:
(1) or (2) EVERLINE® LED lensed modules pre-mounted
(1) LED EVERLINE driver (0-10V dimming) pre-mounted
(1) or (2) 4’ strip fixture panels
Wiring, mounting hardware, installation instructions
LRA28:

4. LRA Features & Benefits
Key Features
Retrofits 4ft or 8ft fluorescent strip fixtures to LED
Fast and easy to install (assemblies are pre-mounted and pre-wired with quick connects to further save installation effort and cost)
23 Gauge painted steel panels are designed for universal compatibility with multiple strip fixture manufacturers
LRA lightbars are DAMP rated allowing for expanded applications in typical strip fixture locations – parking garages, unconditioned spaces, outdoor canopies
3 CCT’s (3500K, 4000K, 5000K)
VAC
Standard 0-10V dimming to 1%
UL Classified UL1598C (US & Canada)
Suitable for Dry or Damp locations
DesignLights Consortium™ qualified
7 Year Limited Warranty

5. LRA Product Offering & Nomenclature
For higher lumen requirements, two LRA14-60L8xx-U may be mounted in tandem to provide an 8’ solution at 12,000 nominal lumens.

6. LRA Shipping Details LRA14 pallet quantity is 80.
There is no MOQ, but LRA assemblies ship on pallet only, they are not intended for parcel shipment.
These fall under the fixture freight policy.

7. LRA Installation Disconnect power and remove lamps
Remove the cover panels and lampholder sockets
Remove fluorescent ballast(s)
Hang the panel without the driver first, using lanyards provided
Route red and blue leads through fixture center
Secure LRA using ¼-turn fastener or drill-point screws provided
Hang remaining panel using lanyards
Wire the blue leads into the 3-position connector
Wire the red leads into the 3-position connector
Secure the ground wire (ground screw is provided if needed)
Connect driver to branch circuit power
Secure LRA using ¼-turn fastener or drill-point screws

8. Additional Resources Resources found on www.unvlt.com:
LRK/LRA Brochure
LRA Specification Sheet
LRA Installation Instructions
LRA Strip Fixture Compatibility Guide
IES files
Online Course on Universal University

9. Snap this QR Code and quickly access our website.
Thank you
Snap this QR Code and quickly access our website.
Website:
Nashville Customer Service: (800)
Universal Technical Engineering Services: BALLAST ( )