Avoid manual shifting of heavy materials

Slides:

Advertisements

Similar presentations

High Potential – Worker Injured While Resting Under the Vehicle

Advertisements

HSE LEARNING INCIDENT: CAUSES : LEARNINGS:

PDO Safety Advice Date: LTI: Amputated finger

Follow the correct practice to secure the crane hook and block

Know your workplace hazards

Use hands off and avoid crush points

PDO Safety Advice What happened?

Isolate batteries before attempting to handle

INCIDENT: On 23rd July 2010 at about 7.40 AM, Birba (Transport subcontractor of SGEE) HD driver was descending down from the prime mover cabin after completing.

Injury: Fall from height

LTI: Fractured forearm

Never intervene to correct obstacles without stopping the activity

Key Learning: Look for the green tag before accessing a scaffold

Hand and Finger Injuries

INCIDENT: A 50 T crane was lifting pressure equipment skid (2.5 ton) from the wash bay area to wellhead equipment area. The crane was positioned in between.

LTI: Multiple fractures Always follow the Safe Journey Management Plan

Hip Fracture: Walking on the pipe

Always think to use hands off technique.

Trailer Wheel Came Off While Moving

 INCIDENT A Floorman and a Roustabout were applying torque on the polish rod before it could be fished out. A 36” pipe wrench was used for the purpose.

Always use the right means of access for working at heights jobs

HSE LEARNING Key Learning: INCIDENT: CAUSES: LEARNINGS:

الدروس المستفادة في مجال الصحة والسلامة والبيئة

PDO Safety Advice Date: 11/08/2015 Injury: Amputated fingers

HSE LEARNING INCIDENT:

 INCIDENT Electrical team along with painter was rigging down electrical cables in preparation to move. During the operation the painter lost his footing,

Check & avoid potential Pinch points

PDO Safety Advice What happened? Your learning from this incident..

LTI: Finger Crush Injury Hands off suspend loads “Use Tagline”

Always observe safe pedestrian zones

HSE LEARNING INCIDENT:

PDO safety advice Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site.

HSE LEARNING INCIDENT:

Fatality: Pedestrian Killed While Crossing Dual Carriageway

Always keep your fingers away from pinch points

Stay out of the “Line of Fire”

RTA Fatality – Third Party

Driving in a dust cloud is like driving at night with no lights on

PDO safety advice Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site.

Ensure safety devices are working prior to starting work

 What Happened The crane outriggers were retracted in attempt to move the crane to another location. As the crane landed on its wheels it rolled backwards.

Seatbelts SAVE lives. INCIDENT

Fatality - RTA Rollover – Private Vehicle

Always watch out for the pinch points. Always use the handle provided.

  What Happened While trimming a piece of wood using electrical wood saw, the carpenter’s left hand came into contact with the saw blade resulting in.

HSE LEARNING INCIDENT:

HSE LEARNING INCIDENT: ROOT CAUSES: LEARNINGS:

LTI: Ring finger injury

Tubing hanger must always be assembled in horizontal position.

HSE LEARNING INCIDENT:

INCIDENT While picking up 3-1/2” D.P, a 2” drift was being used to drift pipe as it was raised up V-door room catwalk, 90 joints in total to be picked.

Be aware of potential pinch points

  HSE LEARNING INCIDENT:

INCIDENT On 26 November 2010 at about 0910H, a 1,500 gal. cap. fuel tanker belonging to BIS (IECC subcontractor) was approaching a curve section of Fahud.

  HSE LEARNINGS INCIDENT: Root Causes: LEARNINGS:

PDO Safety Advice Date: 23/08/2015 Injury: Fractured fingers

HSE LEARNINGS INCIDENT: Root Causes: LEARNINGS:

INCIDENT While picking up 3-1/2” D.P, a 2” drift was being used to drift pipe as it was raised up V-door room catwalk, 90 joints in total to be picked.

HSE LEARNING INCIDENT:

  Key Learning: Ensure all grooves / ditches are covered or filled

HSE LEARNING INCIDENT: Crew were loading pipe bundles with a Hiab in

INCIDENT: One of HD driver in NCP crew wanted to move Mitsubishi canter from the well site after offloading drinking water. When he started the engine.

Key Learning: Wrong Way Correct Way Follow the signposted speed limits

Use the correct lifting device for the load

 HSE LEARNING INCIDENT: CAUSES: LEARNINGS:

Only perform tasks under your responsibility

√ X HSE LEARNINGS INCIDENT: Root Causes: LEARNING:

HSE LEARNING INCIDENT: CAUSES:

Falling From Height – Broken Arm

Apply 3 point contact while ascending/ descending for proper stability

Presentation transcript:

Avoid manual shifting of heavy materials INCIDENT A painter and a helper were rolling a 20” - 600# blind flange to shift into the painting bay after grit blasting. While doing so, the painter slipped and lost balance thereby releasing flange but stretching his hands on floor to arrest his fall. Unfortunately, flange tilted and fell on his left hand fingers which sustained crushed injuries. ROOT CAUSES: Manually shifting heavy flange (387 kg.) Lack of supervision Lateral Learning Avoid manual shifting of heavy materials Recommended Actions: Discuss this alert in toolbox talks and HSE meetings and Distribute to all contractors Post on HSE notice boards Include in site HSE induction Avoid manual shifting of heavy materials Contact MSE511 for further information or visit HSE website LTI No 52-2010 Alert No 24 January 2011