1. Hand and Finger Injuries
INCIDENT
The 13 3/8” coated casing had been run and the IP (floor man) was making up the
surface cement lines. One side of the Chiksan had been installed. While attempting
to make up the other end, IP's right hand got trapped between the Chiksan and
Y-junction piece. He suffered harm to his ring and middle finger.
ROOT CAUSES:
No Effective Toolbox Talk.
Improper Manual Handling.
Poor hazard identification..
Lateral Learning
Plan the work and think of potential hazard.
Do not place hands in a pinch point.
Plan lifting jobs properly.
Supervisors to be in control.
Recommended Actions:
Discuss this alert in toolbox talks and HSE meetings and
Distribute to all contractors
Post on HSE notice boards
Include in site HSE induction  
Key Learning: USE WINCHES INSTEAD OF HANDS AND FINGERS!
Hand and Finger Injuries
Contact MSE511 for further information or visit HSE website LTI No. 65/ Alert No January, 2011