REVERSE OSMOSIS PLANTS 5-35kl/day Dave Hubbard Mobile:0400 465 864 Email: dave@hub4water.com.au Web: www.hub4water.com.au Hub 4 Water Water Filtration Sales and Service H4W Services Service Design Installation Commissioning planned and breakdown maintenance All plant All equipment All brands Reverse Osmosis Ultra Filtration Membrane cleaners Membrane Membrane RO membranes UF/MF membranes Sediment filters Cartridge Filters 10,20,30 & 40” depth filters Bag filters Carbon filters Specialty filters Single and multiple filter housing 304 & 316 SS and plastic housings Sanitary filters and housings Household Filters Drinking water filters Water softeners Whole of house sediment and carbon filters UV Tank filters Tank UV systems Resin and Media Supplies Filtration media Sediment media Activated carbon Iron removal Specialty media Ion Exchange resins High purity resin REVERSE OSMOSIS PLANTS 5-35kl/day H4W Services Service Design Installation Commissioning Planned and breakdown maintenance All plant All equipment All brands Reverse Osmosis Ultra Filtration Membrane cleaners Membrane antiscalants Membrane sanitisers RO membranes UF/MF membranes Sediment filters Cartridge Filters 10,20,30 & 40” depth filters Bag filters Carbon filters Specialty filters Single and multiple filter housing 304 & 316 SS and plastic housings Sanitary filters and housings Household Filters Drinking water filters Water softeners Whole of house sediment and carbon filters UV sterilisers Tank filters Tank UV systems Resin and Media Supplies Filtration media Sediment media Activated carbon Iron removal Specialty media Ion Exchange resins High purity resin Reverse Osmosis works by using a high pressure pump to increase the pressure on the salt side of the RO and force the water across the semi-permeable RO membrane, leaving almost all (around 95% to 99%) of dissolved salts behind in the reject stream. The amount of pressure required depends on the salt concentration of the feed water. The more concentrated the feed water, the more pressure is required to overcome the osmotic pressure. The desalinated water that is demineralized or deionized, is called permeate (or product) water. The water stream that carries the concentrated contaminants that did not pass through the RO membrane is called the reject (or concentrate) Product Flow Rate @ 5-35m3/day System Pressure 2000kPa max Water supply Brackish <2000TDS Low Pressure Pump Optional High Pressure Pump 304-316SS (dependent on water supply) VSD High pressure pump Control Microprocessor Control Function Automatic Protection Low Pressure, motor overload Protection optional High Pressure , antiscalant fault Antiscalant dosing Included Pre Filtration 5/ 1micron cartridge filters Media Filtration Optional Instrumentation Flow rotameters and pressure gauges Low Pressure Piping uPVC High pressure piping uPVC or 316SS (depending on pressure) Clean in Place Optional Membranes Brackish Water Design, build, installation and servicing of all systems serving South Australia… “providing service in metropolitan areas and throughout the state”  

REVERSE OSMOSIS PLANTS 5-35kl/day Dave Hubbard Mobile:0400 465 864 Email: dave@hub4water.com.au Web: www.hub4water.com.au Hub 4 Water Water Filtration Sales and Service H4W Services Service Design Installation Commissioning planned and breakdown maintenance All plant All equipment All brands Reverse Osmosis Ultra Filtration Membrane cleaners Membrane Membrane RO membranes UF/MF membranes Sediment filters Cartridge Filters 10,20,30 & 40” depth filters Bag filters Carbon filters Specialty filters Single and multiple filter housing 304 & 316 SS and plastic housings Sanitary filters and housings Household Filters Drinking water filters Water softeners Whole of house sediment and carbon filters UV Tank filters Tank UV systems Resin and Media Supplies Filtration media Sediment media Activated carbon Iron removal Specialty media Ion Exchange resins High purity resin REVERSE OSMOSIS PLANTS 5-35kl/day System Performance Model   BW 5 BW10 BW15 BW20 BW25 BW30 BW35 Nominal flow @ 20degC Permeate (maximum) m3/hr 0.21 0.42 0.63 0.84 1.05 1.26 1.47 Concentrate (minimum) 0.07 0.14 0.24 0.35 0.49 Feed 0.28 0.56 1.12 1.14 1.68 1.96 Nominal recovery % 75 Membrane elements 4" No. 1 2 3 4 5 6 7 Pump motor size kW 1.5 2.2 * flowrates are dependent on water quality, those stated are 500mg/L TDS & SDI <3 Motor kW dependant on feed water quality System Dimension, weights & connections Height mm 1800 Depth 900 Width 1200 1600 Recommended Head Room m Pipe connections inches 1/2" 1" Permeate Concentrate serving South Australia… “providing service in metropolitan areas and throughout the state”