1. WALK-IN COOLERS & FREEZERS All contents of this presentation ©2003-2006 Master-Bilt Products a division of Standex International, Inc.

2. ADVANTAGES OF MASTER-BILT WALK-INS Standard 4 inch thick panels able to fit a diverse range of applications Foamed-in-place insulation for the most consistent cooling Cam-locking mechanism for simple assembly and disassembly WALK-IN COOLERS & FREEZERS

3. ADVANTAGES OF MASTER-BILT WALK-INS The most durable, well-designed doors on the market NSF-7 approved floors with textured.080 aluminum finish Quick Ship program WALK-IN COOLERS & FREEZERS

4. PANELS WALK-IN COOLERS & FREEZERS

5. PANELS FeatureBenefit Optional 5" or 6" thicknesses Ability to meet your insulation needs Rigid gaskets Bulb-type foamed-in- place on interior and exterior of each panel for an air-tight seal WALK-IN COOLERS & FREEZERS

6. PANELS FeatureBenefit Deeper panel tongue Goes deeper into section connecting panel’s groove section for better seal WALK-IN COOLERS & FREEZERS

7. FOAMED-IN-PLACE INSULATION WALK-IN COOLERS & FREEZERS 4 Inch5 Inch6 Inch 0 5 10 15 20 25 30 35 40 45 50 4 Inch5 Inch6 Inch Fiberglass Polystyrene MB Polyurethane R VALUES

8. CAM-LOCK SYSTEM WALK-IN COOLERS & FREEZERS Details of a typical cam-lock

9. CAM-LOCK SYSTEM More Benefits of the Cam-Lock System Provides sure, tight fit between panels Requires only 5/16" wrench to operate (supplied) Easy to assemble panels or disassemble should relocation be necessary Help form air-tight seals between panels which resist condensation and eventual corrosion WALK-IN COOLERS & FREEZERS

10. DOORS WALK-IN COOLERS & FREEZERS Typical 36 x 78 size Typical 48 x 78, 54 x 78, 60 x 78 size

11. DOORS WALK-IN COOLERS & FREEZERS Features of a typical Master-Bilt V-Series walk-in door

12. DOORS WALK-IN COOLERS & FREEZERS Section through a typical V-Series door frame ¼-inch thick steel hinge support (at hinge locations only) 10 gauge steel backup for vinyl frame Vinyl frame Raceway containing heater wire in freezer doors

13. DOORS FeatureBenefit 26", 30", 36", 48", 54" Wide variety to suit your and 60" widths requirements Spring-loaded, Makes door self-closing cam-lift hinges Interior safety release Prevents entrapment WALK-IN COOLERS & FREEZERS

14. DOORS FeatureBenefit Heavy-duty latch Positive closure Standard door frame heaters Prevents condensation in freezers WALK-IN COOLERS & FREEZERS

15. ADJUSTABLE HINGE BACKING PLATE WALK-IN COOLERS & FREEZERS

16. Benefits of the Adjustable Hinge Backing Plate Unique feature to Master-Bilt walk-ins Re-align a walk-in door without removing the door or door frame Field adjustable ADJUSTABLE HINGE BACKING PLATE WALK-IN COOLERS & FREEZERS

17. STANDARD DEADBOLT LOCKING HANDLE WALK-IN COOLERS & FREEZERS Locks with key or optional padlock No exposed screws Polished chrome finish Plastic plugs act as bumpers Handle installs with two screws

18. STANDARD DEADBOLT LOCKING HANDLE Standard on ALL walk-ins Entire locking system on door frame Locking mechanism can’t be removed from door frame exterior WALK-IN COOLERS & FREEZERS

19. STANDARD DEADBOLT LOCKING HANDLE Even if handle is removed, door remains locked by deadbolt extended over the door exterior Can also be locked in the unlocked position to prevent unauthorized locking Includes inside safety release knob Can be locked by padlock WALK-IN COOLERS & FREEZERS

20. FLOORS WALK-IN COOLERS & FREEZERS

21. FLOORS Benefits of Master-Bilt Walk-in Floors All walk-ins are available with or without floors Floor panels are all foamed in-place urethane Standard floor finish –NSF-7 approved –Textured.080 aluminum –Textured finish provides increased traction and additional floor strength WALK-IN COOLERS & FREEZERS

22. FLOORS Benefits of Master-Bilt Walk-in Floors (cont.) Other floor finishes available –16 gauge smooth stainless steel –.063 smooth aluminum –.100 smooth aluminum WALK-IN COOLERS & FREEZERS