We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byMohamed Haskell
Modified about 1 year ago
Gate Latch The hook is inserted into the eye screw to latch.
Strap Hinge The size is measured from the hinge pin to the end of one strap.
Hinge Hasp One end is like a strap hinge with a slot which folds over an eye or staple to accommodate a padlock.
Butt Hinge This hinge is available with fast pin or loose pin and is plain brass or steel or primed with paint.
"T" Hinge Size is measured from hinge pin to the end of the strap. Commonly use for gates ("T" fastens to post).
Barrel Bolt The other end, a separate piece is an eye which the bolt slides into when locking.
Continuous Hinge Same as the butt hinge except it comes in 8" to 8' lengths and is cut to length with a hacksaw. Also called a Piano hinge
Nail On Electric Fence Insulator Commonly a plastic insulator that nails to a wood post. Insulators hold electric fence conductors about 1" from the post.
Wire Stretcher It consists of two double sheave blocks specifically designed with hooks, holding lock, wire clamp and a rope.
Wire Grip Made of steel or malleable iron. Used to grip fencing wire when tightening
Welded Wire Fence Consists of 16 gauge galvanized wire spot welded rather than woven, and has 2 inch by 3 inch mesh.
T-Post Insulator The insulator is clipped to the steel post and the wire inserted into the plastic clip, thus preventing grounding of the electrical system.
Steel Fence Posts Round steel post with an anchor plate 12 inches from the bottom and comes in 3 to 6 foot lengths.
Fence Staple The length is stated in inches and fractions.
Poultry Wire Netting The rolls are 50 to 150 feet long and from 1 1/4 to 4 feet wide.
Woven Wire Fencing The roll contains 20 rods of wire ranging from 32 to 47 inches wide.
Electric Fence Gate Handle By pulling on the handle, tension can be released on the fence and it can be disconnected allowing entry.
Chain Link Fencing Comes in 36 to 60 inch widths and 50 to 100 foot lengths. Also called Diamond Mesh.
Come-A-Long By working the ratchet handle the cable is tightened and moves the sheave block closer to the ratchet spool.
Barbed Wire A spool of wire is 80 rods long.
T Post A steel post with an attached plate to help anchor the post. Commonly 5'-8' long.
Turn Buckle Turning the body tightens or loosens both at the same time.
Smooth Galvanized Wire It is made of smooth galvanized steel and is available in a variety of gauges.
Compression Spring A compression spring is one that exerts pressure when it is compressed.
Tension Spring This spring can be extended, but exerts force by extending to pull back to its original length.
Torsion Spring When the spring is wound up it exerts a twisting force.
New Mexico FFA Agricultural Mechanics Career Development Event Supplies and Materials.
Shop Supplies and Materials ID. Next Generation Science/Common Core Standards Addressed! CCSS.ELALiteracy.RST.9 ‐ 10.4 Determine the meaning of symbols,
Fasteners Any device used to hold 2 or more pieces of material together or in place Shank – long stem part of a nail/screw.
Hardware Tools. 16. Butt Hinge Butt Hinge Hinge for narrow fencing.
Fence Example 5-wire barbed. Storing posts before use If posts are left lying on the ground they are prone to rot and insect damage.
Ledgewood Farm greenhouse construction How do I Start? to I’m Finished!
How to Make A Telegraph Exploring the Magic of Electricity.
Rescue 42. Objectives To provide an understanding of the following –Specifications –Use –Maintenance –Safety.
Proof Coil Chain A welded link chain. Chain size is designated by the diameter of the steel used in making the links (e.g.. 3/16"-3/4"). Made from low.
Hardware Identification By:Gord Darling Construction technology.
Toggle Bolt When the screw is tightened a firm anchorage is made.
IRON MONGERY. Definition manufacture of iron goods, refers to the range of mechanical and moving items which enable a door to be opened, closed and locked.
Model RJ-3 System Package We offer a Res-Q-Jack™ Model RJ-3 3-point stabilization package system which includes: Qty. of (1) Jack Stand Kit with pins,
Voltage Tester Used for testing voltage on electrical outlets, fuse clips, and circuit breakers will test voltage from 120 to 600 volts.
… OF THE TRADE. TOOLS…. HAND TOOLS Tape Measure Usually metal, housed in a metal or plastic case Feature self-return spring to retract Range from 6-25.
Hinges. Hinges Hinges generally consist of two leaves & a knuckle. Hinges generally consist of two leaves & a knuckle. The knuckle is formed by interlocking.
© Boardworks Ltd of 23 Resistant Materials Components These icons indicate that teacher’s notes or useful web addresses are available in the Notes.
Tool Identification AG STRUCTURES. Terms Tools-any instrument used in doing work Hand tool- any tool operated by hand to do work Power tool- operated.
Sockets, Ratchets, and Impacts Speed Wrench - Available in 1/4”, 3/8”, 1/2” Drives.
BTM I Ar. Mahua Biswas1 CARPENTRY TOOLS Classification of Carpentry Tools 1)Marking and setting out 2)Cutting 3)Boring 4)Planing tools 5)Hammers and.
Chapter 7 Metals. Objectives After reading the chapter and reviewing the materials presented the students will be able to: Outline the basic steps for.
Hand Tools. Pliers Used for a variety of gripping, clamping, bending, and cutting jobs in theatre.
Tools and Fasteners And, Their Uses. A video quiz will follow this Power Point Presentation.
Tools and Functions R7AxwS3BnU.
Specification section Joining methods (temporary): Knock down fittings What you need to learn The advantages and disadvantages of using the various.
Tool Identification WRENCHES Wrenches are the most used hand tool by service technicians. Most wrenches are constructed of forged alloy steel, usually.
Woods Unit 1: Safety Woodworking with Power. Safety Precautions with Machines Wearing safety glasses Ensuring the teeth of saw blades are pointing down.
Use of Hand Tools In Agricultural Mechanics Shops Pender HS Mr. Herren Ag. Mech. I.
Agricultural Mechanics 1 Kingsburg High School. Identifying Metals All metals are either ferrous or nonferrous Ferrous metals contain iron(Fe) Nonferrous.
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED. Unit 7 Hand Tools, Fasteners, and Hardware.
Section 2 Safety, Tools and Equipment, Shop Practices Unit 6: Fasteners.
RIGGING EQUIPMENT Industry Fundamentals and Occupational Safety Unit 6.
Presented By James Wermes & Joe Lopez. Area 2 Includes Battery cable, Starter, Starter Switch & Rod, Generator, Cutout, Terminal Box, Distributor, Spark.
TRUSSES. ROD TRUSSES U - BOLT TRUSS WHAT IS WRONG WITH THIS PICTURE ?
Mr. D’s Quick Guide to. Hand tools is any tool where the force comes from the human user. These have been used for thousands of years. Power Tools.
Gripper Designs By Pragnay Choksi. INTRODUCTION Hands of robots referred to as Grippers No single design is ideal for all applications.
Proper Use of Hand Tools. Wrenches Never use a pipe extension or “cheaters” Select the right opening for the nut Always pull the wrench handle when turning.
Trade Skills Sheet Metal Hand Tools and Machinery.
Types of Threaded Fasteners. Used to hold parts together Clearance holes in parts Nut on other end Can also be used with a threaded hole.
ELECTRICAL TOOLS and ITS FUNCTION. ELECTRICAL TOOLS Electrical tools are needed to perform our job easier and faster. Electrical task can be accomplished.
Step 12 Here is the issue…..the mount for the throttle arm is pushed up against the side of the housing. The problem with this is it allows (due to alignment)
Assembly Instructions DucoSlide Luxframe Controllable TOP BOTTOM L.H. R.H. Control side FRONT SIDE in open position REAR SIDE in open position 1.
New Mexico FFA Agricultural Mechanics Career Development Event General Shop.
Lesson Using Construction Fasteners and Hardware.
Metals Design and Manufacture. Metals Produced by mining ore from the Earth Three main categories of metal: ▫Ferrous ▫Non ferrous ▫Alloys Available in.
Common Types of Nails Fasteners Unit. Objectives 1.Define what a fastener is in the classroom with 100% accuracy. 2.Determine applicable uses for fasteners.
Unit 6: Fasteners Section 2: Safety, Tools and Equipment, and Shop Practices.
Electronics. Solid snap together electronic connectors.
PowerPoint ® Presentation Unit 8 Fastening Systems Nails Staples Screws Bolts Hollow-wall Fasteners Solid Concrete or Solid Masonry Wall Anchors Drive.
© 2017 SlidePlayer.com Inc. All rights reserved.