NS1000 V3.0 - System Resource and Peripheral Incensement - Rev1.1 31 July, 2013

Table of Contents 1. Overview 2. What is enhancement 3. How to program

Chapter 1 Overview 3

Features and Benefits >> 1. Overview Solution Selectable System capacity (flexibility configuration) Features and Benefits >> * Features New for V3 3 types of system capacity patterns When you want to increase NT-phone capacity or H.323 capacity, you can change the system capacity on customer demand. NS1000 supports TDA100D via Stacking card. TDA100D is added for Legacy Gateway of NS1000.

1. Overview NS1000 adds new 2 types of system capacity patterns. System capacity can be selectable based on customer demand. Type-1: Standard Type (same as version 1.x & 2.x) Same as current System resource. This type will be used for the user who satisfy current system configuration. Type-2: IP Extension Type Increase number of IP terminal and decrease number of SIP terminal This type may be used for the user who want to increase NT phone. Type-3: System Resource Type Increase Tenant and H323 expanding This type may be used for the user who want to increase more Tennant and/or Q-Sig node Note: This selection must be set when proceeding Easy Setup Wizard TDA100D Cabinet can be Legacy GW for NS1000. Add supported optional cards for Legacy GW.

Chapter 2 What is enhancement

2-1 Selectable System capacity Selectable Extension capacity When select Type2 mode, IP-PT extension capacity will be increased up to 640. In Type3 mode, SIP extension capacity will be changed. Type Stand alone One Look Type1 Extension Capacity 640 1000 IP-PT (KX-NT series) 256 SIP SIP Phone KX-UT series Type 2 Type 3 384

2-1 Selectable System capacity Selectable IP-GW Capacity When select Type3 mode, IP-GW (H323) capacity will be increased up to 96 Type Stand alone One Look Type1 IP GW 256 H323 48 96 SIP Type2 IP GW Type3 128 160

2-1 Selectable System capacity Selectable Tenant Group capacity When select Type3 mode Tenant Group capacity will be increased up to 128 Type Stand alone One Look Type1 - Tenant Tenant Group 32 Time Table System Speed Dial 1000/Tenant Type2 - Tenant Type3 - Tenant 128 300/Tenant

2-1 Selectable System capacity Increase COS and Carrier for each Unit Other resources will be increased Resource　 Before (V1,V2) After (V3) Type1 ARS Carrier 48 128 No. of COS Group 64 512 User Group 96 256 Type2 Type3 COS 512, Carrier 128 per standalone unit

2-2 Add TDA100D as Legacy GW Legacy Gateway by KX-TDA100D Cabinet of KX-TDA100D can be used as Legacy Gateway to expand legacy trunks and phones. NS1000 can have stacking connection with TDA100D by changing MPR card to STACK-S card in TDA100D same as TDE series (KX-NS0132). Remove MPR card Insert STACK-S card Stack-S card S/W Version should be 2.000 or later TDA100D KX-TDA100D is allowed to be set with another KX-TDA100D on a NS1000 as Legacy Gateway. TDA100D add as additional GW category. - Category1: NCP500 /NCP1000 - Category2: TDE100/200, TDA100/200 - Category3: TDE600/620, TDA600/620 - Category4: TDA100D

2-2 Add TDA100D as Legacy GW Legacy Gateway by KX-TDA100D The maximum number of Legacy Trunk and Extension Stand-alone Stacking system One Look Networking Main 1NCP500 1NCP1000 1TDE/TDA100 1TDA100D 1TDE/TDA 200 1TDE/TDA 600 2NCP500 2NCP1000 2TDE/TDA 100 2TDA100D 2TDE/TDA 200 2TDE/TDA 600 Trunk(ch) 256 600 Legacy 30 64/64/120/120/128/160 128/128/240/240/256/256 LCOT 2 12/16/96/112/128/160 24/32/192/224/256/256 BRI 8 PRI23 23 46/46/92/92/92/115 92/92/184/184/184/230 PRI30 60/60/120/120/120/150 120/120/240/240/240/256 T1 48/48/96/96/96/120 96/96/192/192/192/240 E1 Extension(ch) 640 1000 Legacy*1 44/44/128/120/168/240 88/88/256/240/336/480 SLT 36/36/96/120/128/240 72/72/192/240/336/480 DPT 40/40/96/112/128/160 80/80/192/224/256/320 *1 : The maximum number with DXDP

2-3 Add Optional cards Optional cards for Legacy Gateway Following cards are supported for Legacy Gateways For TDE100/200, TDA100D Model Symbol Description KX-TDA1176 MCSLC16 16-Port Single Line Telephone Card with Message Lamp Interface KX-TDA1178 MCSLC24 24-Port Single Line Telephone Card with Message Lamp For TDE600/620 Model Symbol Description KX-TDA6179 EMCSLC24 24-Port Single Line Telephone Card with CID & Message Lamp Interface For TDA100D Model Symbol Description KX-TDA1180 CLCOT8 8-Port Analogue Trunk Card with CID KX-TDA1186 CLCOT8E 8-Port Analogue Trunk with Caller ID daughter Card

Chapter 3 How to Program

3. Howe to Program System Initialize > Easy Setup Wizard It is necessary to select the type while proceeding Easy Setup Wizard, when you want to change System Capacity Type. System Capacity Type can’t be changed while system running unless initialize NS1000. Note: You can not select System Capacity Type when you upgrade software from Version 2 to Version 3 without Off-Line Tool.

END

Appendix

Appendix System capacity When you select type 2 or type 3 system capacity, V-SIPEXT capacity is changed at each type. Default : <Type 1> 20 cards (640 ports) System Capacity Type 2 SIPEXT : 8 cards (256 ports) System Capacity Type 3 SIPEXT : 12 cards (384 ports)

Modification 20130730-01 5 NS1000 V3.0 System Resource and Perifperal_Rev1.0_30Jul2013.pptx - 1st release 20130731-01 Modified page 5 ‘overview’ and page 13 ‘Description for card’ . - Revision 1.1