1. KX-NS1000
V2.1
Rev Mar., 2013

2. Introduction Following table shows feature list of NS1000 in Ver. 2.1.
Category
Feature item
Summary
Remark 1
System feature
-1.Enhancement for
the Easy Setup wizard
Add the procedure to specify ‘3digits’ or
‘4 digits’ of the numbering
Plan (Extension number digits) in Easy
Setup Wizard.
-2.UM (Mailbox)
Auto configuration
User profiles and Mailbox auto configuration 2
Maintenance
-1.Database Convert
　(Off Line tool)
Database convert from TDE/NCP to NS1000
-2.Voice Data Convert
Voice data convert from TVA/TVM to NS1000 3
Enhancement
for UM features
SYSLOG for UM
port busy
Supported to logging to SYSLOG of all
UM port busy status. 2

3. Current numbering arrangement. (Version 2.0)
Enhancement for the Easy Setup wizard
Add the procedure to specify ‘3digits’ or ‘4 digits’ of the numbering Plan (Extension number digits) in Easy Setup Wizard.
Current numbering arrangement. (Version 2.0) 3

4. The following parameters change by selecting the Numbering Plan.
Enhancement for the Easy Setup wizard
The following parameters change by selecting the Numbering Plan.
3 digits
4 digits
Mixed　(V2.0 Default)
Additional Digits
Type A
Type B
Type C
Extension 01-20 XX
Extension 21 X
Extension 22-64
2.6.1
Feature
3 digits
4 digits
Mixed (V2.0 Default)
ICDG
Default No.
Number of UM Group 8 16 9
UM Group
TAFAS
600
6000
DISA
UM 1,2ch
508,509
5101,5102
FAX Default No.
510
5103 4

5. PBX Configuration - 2.System - 6.Numbering Plan - 1.Main
Enhancement for the Easy Setup wizard
PBX Configuration - 2.System - 6.Numbering Plan - 1.Main
Feature
Leading Number
Type/A/B/C
3 digits
4 digits
Mixed (Default)
Extension Numbering Schema 1
1/2/2
10/20/20
Extension Numbering Schema 2
2/3/3
11/21/21
Extension Numbering Schema 3
3/4/4
12/22/22
Extension Numbering Schema 4
4/1/9
13/23/23
Extension Numbering Schema 5
14/24/24
Extension Numbering Schema 6
15/25/25
Extension Numbering Schema 7
16/26/26
Extension Numbering Schema 19
29/39/39
Extension Numbering Schema 21
50/50
50/50/50
Extension Numbering Schema 22
5/5/5
51/51
51/51/51
Extension Numbering Schema 30
59/59/59
Extension Numbering Schema 31
6/6/6
60/60/60
Extension Numbering Schema 32
Extension Numbering Schema 64 5

6. Enhancement for the Easy Setup wizard
PBX Configuration - 3.Group - 5.Incoming Call Distribution Group - 1.Group Settings
ICDG Number
Floating Extension No.
3 digits
4 digits
Mixed :Default 1
601
6001 2
602
6002 3
603
6003 4
604
6004 5
605
6005 6
606
6006 7
607
6007 8
608
6008 9
609
6009 10
610
6010 : 64
664
6064 6

7. PBX Configuration - 3.Group - 7.UM Group - 2.Unit Settings
Enhancement for the Easy Setup wizard
PBX Configuration - 3.Group - 7.UM Group - 2.Unit Settings
Unit No.
Floating Extension No.
3 digits
4 digits
Mixed :Default 1
500
5001 2
501
5002 3
502
5003 4
503
5004 5
504
5005 6
505
5006 7
506
5007 8
507
5008 9
5009
508 10
5010 : 16
5016 7

8. PBX Configration - 5.Optional Device - 2.External Pager
Enhancement for the Easy Setup wizard
PBX Configration - 5.Optional Device - 2.External Pager ID
Floating Extension No.
3 digits
4 digits
Mixed :Default 1
600
6000 2 3 4 5 6 7 8 9 10 11 12 8

9. Enhancement for the Easy Setup wizard
PBX Configration - 5.Optional Device - 3.Voice Message - 2.DISA Message
OGM Number
Floating Extension No.
3 digits
4 digits
Mixed :Default 1
535
5801 2
534
5802 3
5803 4
536
5804 5
537
5805 6
538
5806 7
539
5807 8
560
5808 9
561
5809 10
562
5810 : 64
599
5864 9

10. PBX Configration - 4.Extension - 1.Wired - 1.Extension Settings
Enhancement for the Easy Setup wizard
PBX Configration - 4.Extension - 1.Wired - 1.Extension Settings
4.1.1
UM Default No.
3 digits
4 digits
Mixed :Default
FAX
508,509
5101,5102 10

11. PBX Configration - 4.Extension - 1.Wired - 1.Extension Settings
Enhancement for the Easy Setup wizard
PBX Configration - 4.Extension - 1.Wired - 1.Extension Settings
4.1.1
FAX Default No.
3 digits
4 digits
Mixed :Default
FAX
510
5103 11

12. The following tables show the country according to the type.
Enhancement for the Easy Setup wizard
The following tables show the country according to the type.
Type
Region
Type A
Australia, South Africa, Germany, Finland, Switzerland, Spain, Greek, East Europe, Russia,
Brazil, Argentina, Other, Singapore/China, Malaysia, Hong Kong, Canada, USA、TR, TW, UA
Type B
U.K., France, Belgium, Norway, Sweden, Denmark, Portuguese, Italy, Netherlands
Type C
New Zealand 12

13. (After the existing mailbox is deleted, a new mailbox is created.
UM (Mailbox) Auto configuration
User profiles and Mailbox auto configuration (Version 2.1)
NS1000 provides a feature to create user profiles and mailboxes same as the extension number by a simple operation.
Select the following options.
Create User profiles and mailboxes for all extensions
- Re-create all mailboxes
(It adds it to the existing “User profiles” and “mailboxes. )
(After the existing mailbox is deleted, a new mailbox is created.
Caution :All mailboxes and voice data will be deleted.) 13

14. Select UM group where mailboxes are created .
UM (Mailbox) Auto configuration
Select UM group where mailboxes are created .
Select UM group where mailboxes are created
Create mailboxes to the UM group of the PBX where extensions belong to
One look Networking
Master
UM Group No.1
Slave 1
UM Group No.2
Slave 2
UM Group No.3
Slave 15
UM Group No.16
The User profile and the mailbox are create with all PBX
where the extension terminal exists. 14

15. Select UM group where mailboxes are created .
UM (Mailbox) Auto configuration
Select UM group where mailboxes are created .
Select UM group where mailboxes are created
Create mailboxes to the specified UM group
UM Group No.1
UM Group No.2
UM Group No.3
One look Networking
Master
UM Group No.1
Slave 1
UM Group No.2
Slave 2
UM Group No.3
Slave 15
UM Group No.16
Created the User profiles and mailboxes only under the UM Group No.3 for this example 15

16. UM (Mailbox) Auto configuration
Two parameters are selected, and “Execute” button is clicked.
The user profile and the mailbox are made by the automatic operation.
It is displayed that the estimate time
In this case, 1 minutes.
Each result is shown in P18 and P19. 16

17. UM (Mailbox) Auto configuration
The creation result is output as the following reports.
Example 17

18. The combination pattern doesn't exist in a gray part.
UM (Mailbox) Auto configuration
Result of executing table
“Create all User profiles and mailboxes if extension do not have”
Upper:
User Profile
Lower:
Mail Box
Created
Assigned
Exist
Current status of user profile
MB No.
Ext No.
MB No.
Ext No.101
MB No.101
Ext No.
MB No.101
Ext No.101
MB No.
Ext No.
MB No.101
Ext No.
MB No.
Ext No.101
The combination pattern doesn't exist in a gray part.
MB No.101
Ext No.101 18

19. The combination pattern doesn't exist in a gray part.
UM (Mailbox) Auto configuration
Result of executing table
“Re-create all mailboxes”
Upper:
User Profile
Lower:
Mail Box
Created
Assigned
Current status of user profile
MB No.
Ext No.
MB No.
Ext No.101
MB No.101
Ext No.
MB No.101
Ext No.101
MB No.
Ext No.
MB No.101
Ext No.
MB No.
Ext No.101
The combination pattern doesn't exist in a gray part.
MB No.101
Ext No.101 19

20. UM (Mailbox) Auto configuration
Target Extension's type:
Wired (PT/SLT) EXT
Wireless (PS) EXT
ISDN EXT (2XX Wildcard Extension numbering : In this case, without the target.)
IP EXT
Condition of creating relation between Mailbox, EXT and User profile.
　1) While Mailbox number and EXT number is matched.
< begins-with match>
ex Target EXT number：101. begins-with 10 , 101, match 101
　2) System will not change relation
if same relation of these information already assigned. 20

21. UM (Mailbox) Auto configuration
Condition of Mailbox auto creation is not working
1) Mailbox number begins-with number match existing EXT number.
Target mail box; Subscriber's mailbox number, Interview mailbox and Mailbox Group
mailbox assigned for Automatic Two-way Recording
　　　　　　 Message Manager’s maillbox:998), System Manager’s mailbox:999
2) While EXT number has only 1 digits (thus min Mailbox number is 2 digits)
3) Total mailbox number exceed 1024 for 1 NS cabinet (Except Interview mailbox and Mailbox Group)
Condition of User profiles auto creation is not working
1) Login Account and Login ID has been allocated for other user.
2) EXT number has been allocated to other profile.
　　1) and 2) These meanings that
Login Account, Login ID and the number of the target has already been allocated.
3) Exceed more than max user profile number （1512）. 21

22. Database Convert (Off Line tool)
The off-line programming tool provides legacy database converter feature
that can convert system data of NCP/TDE/TDA series PBX
into data for NS1000. It is the same as version 2.0.
UPCMC (PBX Replacement)
Off line tool (V2.1)
NS1000 is overwritten
in new DCSYS.
TDE100
/200
DMSYS
Convert
Edit
TDE600
DGSYS
DCSYS
report
DBSYS
NCP500
/1000
TDA100
/200
DSYS
NS1000
TDA600
DLSYS
Activation key is not transferred at the converting database
TDA
TDE/NCP
Please refer to another document for details.
Document name is 　Database Converter_Rev1.0.pptx 22

23. TVM/NS1000-UM Conversion Backup from TVM Restore into UM in NS1000
1.NS1000 provides the way to convert TVM’s voice data, and install into UM.
2.This is handy for replacement user to use all prompt and message
in TVM can be converted to UM in NS1000.
Backup from TVM
Restore into UM in NS1000
Backup
BKP file
Restore
BKP file
BKP file
BKP file
NS1000
TVM200/50
IMA-ADPCM
G.711 PCM (μ-Low or A-Low)
TVM PCMC
NS1000 Web MC
Please refer to another document for details.
Document name is TVM_UMConverter_Rev0.2_18Jan2013Mar.ppt 23

24. SYSLOG for UM port busy
The following error messages are displayed, when the traffic to UM exceeds capacity.
Sys Log.
KX-NS1000 svcmng:[#err]<147>
13/03/05 17:21:55
MN ALM # All UM port exceed the busy threshold time [hh:mm:ss]
[hh:mm:ss] = Busy hold Time 24

25. Please recommend AK of UM to be increased to the customer.
SYSLOG for UM port busy
The following error messages are displayed, when the traffic to UM exceeds capacity.
Error Log.
All UM ports exceeded the busy threshold time [00:01:11]
Please recommend AK of UM to be increased to the customer. 25

26. END 26