T7 – POLYPROPYLENE PLEATED CARTRIDGES Sunmicron T7 – POLYPROPYLENE PLEATED CARTRIDGES PRODUCT CATAGORIES ■ T7 – Pleated Polypropylene Cartridges FEATURES ■ FDA Compliant filter material ■ Broad chemical compatibilities. ■ Dense polypropylene media pleats, extended large filter surface area, large contaminant retention capacities ■ Depth filter media composites, extended filter service life. ■ Contaminants are trapped inside the filter for easy dirt removal. ■ Available in 20”, 40” and 60” lengths. ■ Fiber glass reinforced hard shell for better pressure resistance ■ 1 ~ 100 micron range, 95% nominal rating. ■ High flow rate. Upto 110 m³/Hr. ■ Low pressure drop ■ 2.40 Bar suggested change-out pressure differential TYPICAL APPLICATIONS ■ Thermal Power Plant Cooling Water ■ Desalination ■ Food & Beverage ■ RO System Pre-filter ■ Bottled Water ■ Solvent, Paint & Coating ■ Petro-Chemical & Chemicals ■ Oil Fields & Offshore Rigs TECHNICAL SPECIFICATIONS Filter Media Seam Length Diameter Temperature Flow Rate Model Availability Category Treatment (inch/mm) (mm) (˚C) (LPM) T7-20 Polypropylene Pleated Thermal Welding 20/508 152 80 660 Max. T7-40 40/1016 1300Max. T7-60 60/1524 1900 Max. -----------------------------------------------------------------------------------------