EQUIPMENT ENGINEER EQUIPMENT ENGINEER (as E05-E09 Board Maintenance Engineer for ADGT Equipment Eng’g) Taleo Job Number: Qualifications:  Graduate of ECE, COE, or EE.  With in-depth experience in PCB, Probe/Test Board Circuit Design and Board Failure Analysis  At least 3 years exposure in Probe/Test Board Design, Test Circuit Failure Analysis and Repair  Knowledgeable in circuit analysis.  Knowledgeable in C++, Unix, Statistical Tools is an advantage.  Good oral and written communication skills. Brief Job Description: The Equipment Engineer is responsible in the Maintenance, Test Circuit Failure Analysis and Repair of Probe Card and Test Hardware; ensure DFM practice; and use of simulation analysis tools. He/She will be under the Board Maintenance Section. For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

EQUIPMENT ENGINEER (As E05 - E07 Test System Support Engr. for ADGT Eqpt. Eng’g.) Taleo Job Number: Qualifications:  Graduate of BS Electronics Engineering, Computer Engineering or related course.  At least 2 years experience in the maintenance of semiconductor ATE such as Teradyne, Credence, TMT or equivalent high-end Mixed Signal Test System is an advantage.  Knowledgeable in UNIX environment and C/C++ programming language.  Proficient in circuit analysis.  Good communication and strong leadership skills is required. Brief Job Description: The Equipment Engineer is responsible for equipment maintenance and improvement activities. He/She will also supervise and lead technical specialist in the repair, troubleshooting, and preventive maintenance of equipment. For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

EQUIPMENT MAINTENANCE TECHNICIAN EQUIPMENT MAINTENANCE TECHNICIAN (as N32-N35 Board Repair Technician for ADGT Equipment Eng’g. ) Taleo Job Number: Qualifications:  Graduate of Electronics Technology or related field.  At least 2 years experience in test board repair.  Knowledgeable on ATE systems such as Teradyne, Credence, TMT, CTS, or equivalent Test system is an advantage.  Knowledgeable in Unix environment, C/C++, Visual Basic, and Visual C programming.  Good communication skills.  Proficient in circuit analysis. Brief Job Description: The Equipment Maintenance Technician will be responsible in the repair/debug of test boards used in the manufacturing floor. He/She will support manufacturing in hardware related issues. For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

TEMPORARY TECHNICIANS TEMPORARY TECHNICIANS (as TN00 Temporary Test Technicians in ADGT Test Mfg & Eqpt. Eng’g.) Qualifications:  Graduate of a 3-year Electronics, Electromechanical, Instrumentation or Industrial Technology.  Good Communication skills.  Computer Literate.  OJT experience in a semiconductor company is an advantage Brief Job Description: The Temporary Technician is responsible in providing adequate support in repair and set– up of manufacturing equipment with the aim of preventing and minimizing equipment downtime. For referrers: Please inform your referrals to apply at Taleo Job Number: Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

TEST DEVELOPMENT ENGINEER TEST DEVELOPMENT ENGINEER (as E06-E07 RF Test Development Engr. for ADGT Test/Product Eng’g) Qualifications:  Graduate of Electronics & Communications Engineering.  Can implement RF and mixed signal device characterization and testing.  At least 2 years experience in semiconductor industry.  Has experienced working with Labview and Automatic Test Equipment (ATE) such as Flex RF and Ultraflex.  Proficient in RF module and system fabrication.  Possesses strong knowledge in semiconductor RF fabrication.  Has working knowledge in statistical process control and quality systems.  Experience in designing PCB for RF application is an advantage.  Has good project management skills.  Good oral and written communication skills. For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Taleo Job Number: Brief Job Description: The RF Test Development Engineer will be responsible for designing and implementing both manual custom fixtures and test solutions for volume manufacturing. He/she will work closely with design engineering, product engineering, manufacturing, marketing, customers and management to define measurement strategies, implementation of test applications and release manufacturing solutions. He/she will also provide support during new product introductions and improvement activities on RF product testing. Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

Qualifications:  Graduate of BS Electronics & Communications & Electrical Engineering.  At least 2 years experience in final test, wafer probe/sort, test development, or any related field in semiconductor and electronics.  Proficient in circuit analysis.  Knowledgeable in Pascal or C Programming language.  Familiar with linear and mixed-signal testing.  Excellent communication skills. Brief Job Description: The Test/Product Engineer is responsible to provide support to manufacturing and ensure product testability with respect to published electrical specifications or datasheets to the highest quality and reliability. MANUFACTURING TEST ENGINEERS (8) (as E05-E09 Product Sustaining Engr. for ADGT Test/Product Eng’g.) Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

PRODUCT PLANNING MANAGER (as E11 Product Planning Manager for ADGT Planning Department) Qualifications:  Graduate of BS Industrial, Industrial Management Engineering or Supply Chain Management or equivalent.  With System knowledge on Enterprise Planning System - SAP, Promis, Advance Planning System and Supplier Planning Experience.  With minimum of 5 years experience in a semicondutor manufacturing or Planning operations in an assembly or test operations.  Good communication skills. Brief Job Description: The Product Planning Manager is responsible for the review and validation of supplier manufacturing scheduling process and planning lead times. He/ she will also be responsible for the due date settings, systems review and accuracy of related factory metrics. He/ she will work with Supplier Planning in resolving supply related inquiries. He/ she must be able to interact with MPD Planning, ADGT and South East Asia (SEA) Operations organization. Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

Qualifications:  Graduate of BS Business, Operations, Logistics, Industrial Engineering or equivalent degree.  MBA or equivalent MS degree is an advantage.  Knowledge and experience on Enterprise Planning System - SAP, Promis. Advance Planning System and Supplier Planning.  3 years Logistics/Operations experience in a semiconductor, electronics, or high technology environment.  Familiar with semiconductor Assembly and Test manufacturing environment.  Self motivated and independent individual.  Good communication skills. Brief Job Description: The Product Planner is responsible for providing logistics interface and direction to supplier assembly and test facility in support for WWM. Requires frequent communication with ADI assembly & test operations, MRB, and planning to resolve production related issues. He/She is also responsible for monitoring performance measures (starts/ships/due dates/lead times) of SUPPLIER to drive continuous improvement. Requires the ability to provide customer service support for urgent supply issues to our internal product line planning groups. PRODUCT PLANNER (as E07 Supplier Planner for WW B/E Operations) Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

(as E05 – E07 Backend Process Engr. for ADGT Mfg. Support Eng’g.) Qualifications:  Graduate of Industrial, Electrical, Mechanical, Metallurgical or Materials Engineering.  2 years experience in a semiconductor manufacturing environment.  Knowledge in Tape and Reel process is an advantage.  Knowledgeable in 8D Technical writing.  Good oral and written communication skills.  Computer literate. Brief Job Description The Backend Process Engineer is responsible in conducting yield, quality, and upgrading activities through process or equipment development and enhances processes for product manufacturability. MANUFACTURING TEST ENGINEER Taleo Job Number: Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at

10 (as E05 – E07 Test Process Engr. for ADGT Mfg. Support Eng’g.) Qualifications:  Graduate of Electronics and Communications, Electrical or Mechanical Engineering.  2 years experience in a semiconductor manufacturing environment.  Experience in process engineering is an advantage.  Knowledgeable in Gravity Fed, pick and place/ tape and reel process.  Proficient in FMEA, DOE and SPC.  Good oral and written communication skills.  Good leadership skills. Brief Job Description The Test Process Engineer will be assigned in Test Manufacturing and Engineering and will focus on activities concerning process improvements. He/she will also sustain Test Manufacturing performance metrics in terms of yield and cost reductions. MANUFACTURING TEST ENGINEER Taleo Job Number: Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at

Qualifications:  Graduate of Behavioral Science, Psychology, Industrial Relations, or any related degree.  At least 3 years experience in a similar position.  Employee and/or Labor relations experience is a definite advantage.  Able to work across organization boundaries and functions.  Ability to exercise sound judgment.  Highly developed oral and written communication skills.  Skilled at leading and resolving employee relations investigations.  Creative, innovative, and able to handle confidential information. Brief Job Description: The Employee Relations Officer will assist the ER group in the effective implementation and management of company policies and programs intended to promote the general well-being of the employees. He/She will contribute in continuously building harmonious working relationship between management and employees. He/she is responsible for building employee relations capability and management effectiveness through the development and execution of proactive employee and labor relations initiatives. HR CONSULTANT (as E07 - E09 Employee Relations Officer for ADGT Human Resources) Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at

QUALITY ENGINEER (as E06 Reliability Operations Engineer for WW Reliability Operations) Qualifications:  Graduate of Electronics, Chemical, Materials, or Metallurgical Engineering.  2-4 years work experience in semiconductor manufacturing environment.  Preferably with knowledge in component reliability, AECQ automotive qualification requirements.  Familiar with Failure Analysis techniques, test systems is an advantage.  Good oral and written communication skills. Brief Job Description: Responsible for the design, planning, and execution of Reliability qualifications/evaluations related to process/product change and release. Implements reliability methods to determine reliability of affected units. Analyzes qualification results, FA reports, test and assembly data to determine scope and cause of the problem, and recommends corrective action addressing the problem. Prepares documentation, reliability reports for internal distribution and/or end customer. Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form and Letter of Intent. Resume must be uploaded at For referrers: Probationary period will apply to successful external applicant. Please inform your referrals to apply at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

13 FACILITIES ENGINEER FACILITIES ENGINEER (as E05 – E07 Facilities Engineer in ADGT Facilities ) Qualifications:  Registered Electrical or Mechanical Engineer with good interpersonal and teamwork skills.  At least 2 years experience in operation and maintenance of facilities/plant engineering preferably gained from semiconductor or pharmaceutical manufacturing company or in hotel industry.  Knowledgeable in EMS/OHSAS programs.  Experience in Building Maintenance and project management (preparation of Bid Docs, Design/Specs., and Detailed Engineering Estimates) is an advantage.  Proficiency in PLC programming is an advantage.  Good oral and written communication skills. Brief Job Description: The Facilities Engineer will be responsible for: 1.Providing engineering and technical supervision to ensure continuous operations of Facilities equipment including HVAC, CDA, Electrical systems, RO/CDI, WWTP, Gas, Vacuum systems and others as required. 2. Providing cost-effective engineering design on any facilities modifications/alterations to support the dynamic requirements of manufacturing and support group's operation. 3. Monitor operating cost and developing strategic plans for cost reduction and optimization. 4.Managing daily maintenance and building systems operational activities for the facility. 5.Ensuring health and safety are at all times of prime importance in the execution of all Facility operations. For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Letter of Intent, Job Bid Form and resume to Daisy Francia, Louie Garganta (ADGT) and Bicbic Recto (ADPI). For referrers: Please send in their resume with photo and transcript of records thru or hand in a printed copy with referral slip to the HRD Office c/o Daisy Francia, Louie Garganta (ADGT) or Bicbic Recto (ADPI). Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / Taleo Job Number:

QUALITY ASSURANCE INSPECTORS (8) (as QA Inspector for ADGT Product Assurance ) For Internal Hiring Only!!! Qualifications:  Quality-driven, detail-oriented, and meticulous.  Good oral and written communication skills.  Computer literate. Brief Description: The QA Inspector will perform in line monitor at Assembly or Test in accordance with the defined process and product specifications and work instructions. The QAI will also support in ensuring that established quality systems are adhered to. Taleo Job Number: For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form & Letter of Intent. Resume must be uploaded at Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

Qualifications:  Graduate of any 4-year course.  Quality-driven, detail-oriented, and meticulous.  Good oral and written communication skills.  Computer literate. Brief Job Description: The QA Coordinator will perform as MRB personnel at Test. The QAI will also support in ensuring that established quality systems are adhered to. QUALITY COORDINATOR (as N55 Quality Coordinator for ADGT Product Assurance) Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / Taleo Job Number: For Internal Hiring Only!!! For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Job Bid Form & Letter of Intent. Resume must be uploaded at

Qualifications:  College Level.  Experience in Front-of-line assembly in a semiconductor manufacturing environment is a must.  Quality driven, detail – oriented, and meticulous.  Good oral and written communication skills.  Computer literate. Brief Job Description: QUALITY INSPECTOR (as QA Inspector for ADPI Product Assurance) For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Submit a duly approved Job Bid Form, Letter of Intent and updated resume to Daisy Francia or Louie Garganta (ADGT) and Bicbic Recto (ADPI). The QA Inspector will perform a variety of visual/mechanical/electrical inspection on purchased in-process or finished products or materials. He/She will also ensure that raw materials, in-process and finished products meet company standards. For Internal Manpower Pooling Only!!! Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

(as E06 – E07 Manufacturing Engineer for ADGT Planning) Qualifications:  Graduate of BS Industrial Engineering.  At least 3 years experience in a semiconductor manufacturing environment.  Knowledgeable in Microsoft Excel.  Knowledge in Microsoft Access is an advantage.  Good oral and written communication skills.  Can work with minimum supervision.  Has good leadership skills. Brief Job Description The Manufacturing Engineer is responsible for developing, implementing and maintaining methods, processes and systems related to factory capacity. Calculates capacity requirements. Interfaces with Manufacturing and its support group. Coordinates resolution of capacity constraints. Models capacity and consumption data into the Planning System. MANUFACTURING ENGINEER For Internal Manpower Pooling Only!!! For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Please submit a duly approved Letter of Intent, Job Bid Form and resume to Daisy Francia, Louie Garganta (ADGT) and Bicbic Recto (ADPI). Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.

Qualifications:  Graduate of any computer related course.  Knowledgeable in UNIX, PROMIS, systems documentation or any computer programming language.  Knowledge in database and/or web development is an advantage  Good oral and written communication skills.  Can work with minimum supervision. Brief Job Description: The Software Support Assistant is responsible for assisting IS Software Engineers in providing STDF files to ADI internal customers specially those data logs needed by the Test Engineers and the Chute Yield Team. He/She will also play a key role in the documentation of IT related reports. The Software Support Assistant will also have the opportunity to learn and do basic programming as specified on the above qualifications. TEMPORARY SOFTWARE SUPPORT ASSISTANT (for ADGT IS Department) For internal applicants: Probationary period will not apply to regular employees. You should have at least 1 year residency in the company and in the current position. Submit a duly approved Job Bid Form, Letter of Intent and updated resume to Daisy Francia or Louie Garganta (ADGT) and Bicbic Recto (ADPI). For Internal Hiring Only!!! Deadline of submission is on June 1, For inquiries, you may call local 7016 / 7413 / 7393.