1. Vacant Positions Page 1 of 3 SENIOR SOFTWARE DESIGN ENGINEER Minimum Position Requirements: LINE QUALITY MANAGER FAILURE ANALYSIS ENGINEERSUPPLIER QUALITY ENGINEER Graduate of Engineering (CoE, EE and ECE) / Computer Science / Information Technology or any equivalent degree With at least 5 years software development experience in a design or engineering environment Must have very strong C/C++ programming skills. Must have relevant experience in software development for embedded systems (Linux and/or other embedded OS) including kernel and device driver development Preferably with project management experience and with good communication skills. Graduate of any Engineering Courses. Minimum of five years supervisory experience in semicon, PCBA or EMS manufacturing quality. Must have solid work experience in managing line quality within a Manufacturing setting. Keen on details and knowledgeable on workmanship quality standards such as IPC, Military, JIS, JEDEC and ANSI. Competency in the application of basic quality / problem solving tools is a must (pareto, cause and effect, histogram, scatter diagram, SPC, G8D, MSA, PFMEA, PCP amongst others) Preferably a Six Sigma Practitioner; knowledgeable in all quality tools and International Quality Standards like ISO 9001 and TS 16949. With above average communication skills (both written and verbal) With strong personality, firm and decisive. Minimum Position Requirements:  Graduate of BS Metallurgical Engineering  Must have an in-depth knowledge on electronics/semiconductor device physics, ICs, and PCBs.  With proven ability in problem solving, DOE, G8D and statistical analysis.  With experience in analytical laboratory works within an electronics or semiconductor company  Knowledgeable in XRF, FTIR, SAM, SEM/EDX, Decap, Microsectioning and other FA tools.  Must have good leadership and communication skills with strong ability in technical writing.  Must have good understanding on Reliability Engineering. Graduate of Engineering (Chemical/Mechanical) or any equivalent degree With at least 2 years equivalent work experience in a plastic and metal manufacturing company Knowledgeable in Plastic, Metal, or PCB/Flex Manufacturing Knowledgeable in APQP, FMEA, 8D and other QA Tools. Can confidently communicate and coordinate any technical issue to internal and external customers.

2. Vacant Positions Page 2 of 3 SENIOR SOFTWARE DESIGN ENGINEER Minimum Position Requirements: LINE QUALITY MANAGER FAILURE ANALYSIS ENGINEERSUPPLIER QUALITY ENGINEER Graduate of Engineering (CoE, EE and ECE) / Computer Science / Information Technology or any equivalent degree With at least 5 years software development experience in a design or engineering environment Must have very strong C/C++ programming skills. Must have relevant experience in software development for embedded systems (Linux and/or other embedded OS) including kernel and device driver development Preferably with project management experience and with good communication skills. Graduate of any Engineering Courses. Minimum of five years supervisory experience in semicon, PCBA or EMS manufacturing quality. Must have solid work experience in managing line quality within a Manufacturing setting. Keen on details and knowledgeable on workmanship quality standards such as IPC, Military, JIS, JEDEC and ANSI. Competency in the application of basic quality / problem solving tools is a must (pareto, cause and effect, histogram, scatter diagram, SPC, G8D, MSA, PFMEA, PCP amongst others) Preferably a Six Sigma Practitioner; knowledgeable in all quality tools and International Quality Standards like ISO 9001 and TS 16949. With above average communication skills (both written and verbal) With strong personality, firm and decisive. Minimum Position Requirements:  Graduate of BS Metallurgical Engineering  Must have an in-depth knowledge on electronics/semiconductor device physics, ICs, and PCBs.  With proven ability in problem solving, DOE, G8D and statistical analysis.  With experience in analytical laboratory works within an electronics or semiconductor company  Knowledgeable in XRF, FTIR, SAM, SEM/EDX, Decap, Microsectioning and other FA tools.  Must have good leadership and communication skills with strong ability in technical writing.  Must have good understanding on Reliability Engineering. Graduate of Engineering (Chemical/Mechanical) or any equivalent degree With at least 2 years equivalent work experience in a plastic and metal manufacturing company Knowledgeable in Plastic, Metal, or PCB/Flex Manufacturing Knowledgeable in APQP, FMEA, 8D and other QA Tools. Can confidently communicate and coordinate any technical issue to internal and external customers.

3. Vacant Positions Page 3 of 3 SENIOR SOFTWARE DESIGN ENGINEER Minimum Position Requirements: LINE QUALITY MANAGER FAILURE ANALYSIS ENGINEERSUPPLIER QUALITY ENGINEER Graduate of Engineering (CoE, EE and ECE) / Computer Science / Information Technology or any equivalent degree With at least 5 years software development experience in a design or engineering environment Must have very strong C/C++ programming skills. Must have relevant experience in software development for embedded systems (Linux and/or other embedded OS) including kernel and device driver development Preferably with project management experience and with good communication skills. Graduate of any Engineering Courses. Minimum of five years supervisory experience in semicon, PCBA or EMS manufacturing quality. Must have solid work experience in managing line quality within a Manufacturing setting. Keen on details and knowledgeable on workmanship quality standards such as IPC, Military, JIS, JEDEC and ANSI. Competency in the application of basic quality / problem solving tools is a must (pareto, cause and effect, histogram, scatter diagram, SPC, G8D, MSA, PFMEA, PCP amongst others) Preferably a Six Sigma Practitioner; knowledgeable in all quality tools and International Quality Standards like ISO 9001 and TS 16949. With above average communication skills (both written and verbal) With strong personality, firm and decisive. Minimum Position Requirements:  Graduate of BS Metallurgical Engineering  Must have an in-depth knowledge on electronics/semiconductor device physics, ICs, and PCBs.  With proven ability in problem solving, DOE, G8D and statistical analysis.  With experience in analytical laboratory works within an electronics or semiconductor company  Knowledgeable in XRF, FTIR, SAM, SEM/EDX, Decap, Microsectioning and other FA tools.  Must have good leadership and communication skills with strong ability in technical writing.  Must have good understanding on Reliability Engineering. Graduate of Engineering (Chemical/Mechanical) or any equivalent degree With at least 2 years equivalent work experience in a plastic and metal manufacturing company Knowledgeable in Plastic, Metal, or PCB/Flex Manufacturing Knowledgeable in APQP, FMEA, 8D and other QA Tools. Can confidently communicate and coordinate any technical issue to internal and external customers.