Presentation is loading. Please wait.

Presentation is loading. Please wait.

Www.uniortools.com MOTORBIKE TOOLS Igor Žmavc December, 2013.

Similar presentations


Presentation on theme: "Www.uniortools.com MOTORBIKE TOOLS Igor Žmavc December, 2013."— Presentation transcript:

1 MOTORBIKE TOOLS Igor Žmavc December, 2013

2 The tool is designed for holding the clutch, gears and the cam shaft when tightening gears in the range from 40 up to 130 mm Usage for all types of motorbikes Its wedge-shaped gripping shanks provide grip between teeth while preventing them from being damaged The tool also includes a screw, which enables the tool to be fixed in a certain position and, consequently, a firm grip Material: special steel C45- 6 mm; hardened and tempered 30-35HRc Max. allowable torque: 200 Nm Surface finish: chrome plated according to EN12540 Ergonomic heavy duty double component handle 3050/2BI Clutch and gear wheel holding tools

3 The tool is designed for holding the magnet and the sprocket Due to its universal structure, it allows holding holes with a diameter of 5 or 9 mm and at a distance between 20 to 180 mm Usage for all types of motorbikes The tool also has a screw that enables fixing of the tool at the actual distance between holes on the magnet or the sprocket Material: St mm; nozzle C45, hardened & tempered HRc Max. allowable torque: 150 Nm Surface finish: chrome plated according to EN12540 Ergonomic heavy duty double component handle 3051/2BI Rotor and sprocket holding tools

4 This tool is used to attach and detach valve springs and features a self-locking lever and quickly-adjustable fittings (dim. 17, 21 and 25 mm) to allow it to be used with all kinds of engines NEW Material: special tool steel C45 – 4 mm; material of fittings: C45 Hardened and tempered HRc Chrome plated EN 12540; Ergonomic heavy duty double component handle 3052/2BI Valve spring compressor for motorbikes

5 Allows flywheel removal without pulling motor from hull The tool has different sizes of external thread, thus enabling coverage of the majority of motor types that have a magnet with an internal thread: M10x1 M14x1,5 M16x1,5 M16x1,5 M18x1,5 M18x1,5 M20x1,5 M24x1 M22x1,5 M27x1L 3055/4A 3055/4B On each axis, there is an attachment for an open-end wrench that makes the removal of the magnet easier Material: special tool steel C45; hardened and tempered HRc Surface finish: blacken to standard DIN /4A,B Flywheel puller with external thread

6 Intended for use where there is not enough place for working with standard socket wrenches Material: 25CrMo4; hardened and tempered HRc Surface finish: chrome plated according to EN12540 Will not withstand torque according to ISO standard for standard socket wrenches 3056/2 Socket 1/2" with thin wall

7 for scooters PIAGGIO, GILERA ccm; water- and air-cooled it is used as a block for the gear on the starter when untightening the front part of the drive comes with 3 different lengths of accessories (7,5 mm, 10 mm in 25,5 mm) that cover several types of drives Material: St37- 4 mm; nozzle C45, hardened and tempered HRc Surface finish: chrome plated according to EN /2 Universal variator holder tool

8 For scooters PIAGGIO, GILERA ccm; water- and air-cooled Tool has a triple function: 1.it is used as a block for the gear on the starter when untightening the front part of the drive 2.accessories for holding the pot on the back part of the drive for untightening the nut 3.Wrench S34/S38 for untightening the inside nut of the back part of the drive comes with 3 different lengths of accessories (7,5 mm, 10 mm in 25,5 mm) that cover several types of drives Material: St37- 4 mm; nozzle C45, hardened and tempered HRc Surface finish: chrome plated according to EN /2 Variator and clutch drive holder tool with ring wrench

9 Intended for use where there is not enough space for working with standard wrenches for replacing spark plugs Drop forged, material: 25CrMo4; hardened and tempered HRc Surface finish: chrome plated according to EN /2 Spark plug socket 3/8" with thin wall

10 Enables the removal of valve seals without removing the head of the motor the accessories covers the following dimensions of spark plugs: M10x1, M12x1.25, M14x1.25 and M18x1.5 accessories Ø8 mm, Ø13 mm and Ø16 mm for removing pins accessories Ø12 mm in Ø14 mm for assembling seals 3059 Valve seal removal set for motorbikes

11 Accessories Ø5 mm in Ø9 mm for assembling pins 3059 Valve seal removal set for motorbikes

12 Chain breaker, press and riveting tool for REGINA, DID and RK chains with graduation: 415, 420, 428, 520, 525, 530, /2BI Chain breaker, press and riveting tool for motorbike

13

14 it is used for the control of the tension of the drive belts Controlling tool is mounted onto the belt. On the marked part of the engine the belt is forced by hand to establish the sag of the belt so that it is in conformance with the pressure force of 45N and the sag as defined by the manufacturer the belt Used in accordance with the servicing instructions 3201/2 Tool for controlling cam belt tension for motorcycle

15 The spoke wrench is used for tightening spoke nipples Material: special tool steel 31CrV3, thickness 6 mm Hardened and tempered: HRc Surface finish: chrome plated according to EN /2 Spoke wrench for motorcycle

16 It enables radial control of the rim position with a sensor The geometry of the calipers enables a simultaneous axial control for accurate truing of the rim - Wheels with dimensions 19 to max. 32 inches can be centered - for axis dimensions of 12 to 36 mm The stand has a spirit level for setting in a horizontal position The stand enables fixing of cones to the axis that enable the centering of the wheel on its own bearings, thus preventing the possibility of centering errors Material: steel DC01; lacquered E/P 3302/6 Stand for motorcycle wheel alignment

17 The tool is used for compressing brake pistons when replacing brake pads Is useful for compressing single, double and tripple brake pistons For compressing double or triple brake pistons, we leave the used brake pads in the brake housing. This will prevent one of the pistons being pushed from the housing. Material: special tool steel C45; hardened and tempered HRc Surface finish: chrome plated according to EN /2 Disc spreader for motorcycle

18 This tool is used to holding the cartridge rod Useful for most types of motorcycles Material: special tool steel C45, 2 mm Surface finish: chrome plated according to EN /2 Holding tool for cartridge rod for motorbikes

19 For operate setting the telescopes of motorbikes and scooters from Ø32 till Ø60 mm The slim version of the wrench enables the setting of slim toothed nuts Material: special tool steel C45, 4 mm; Hardened and tempered HRc Plastic dipped handle Surface finish: chrome plated according to EN /2P Flexible hook wrench for motorbikes

20 Tool is used for assembling and disassembling springs (spring for support legs, seat and reservoir, by exhaust systems, as assistance in assembling the chain of the cam shaft, etc) Material: special tool steel C45; Hardened and tempered: HRc Surface finish: chrome plated according to EN12540 Ergonomic heavy duty double component handle 3600/2BI Spring hook

21 By using the tool set, you can disassemble: 1. the entire shield (plastic parts) 2. most parts of the frame 3. engine parts like: - replacing spark plugs - changing oil in the transmissions (of the gearbox) - disassembling various engine bonnets - disassembling brakes and replacing brake pads 3700 Scooter tool set

22 By using the tool set, you can disassemble: 1. the entire shield (plastic parts) 2. most parts of the frame 3. engine parts like: - replacing spark plugs - changing oil in the transmissions (of the gearbox) - disassembling various engine bonnets - disassembling brakes and replacing brake pads - changing brake fluid - disassembling wheels - for various suspensions and holders 3700PRO Scooter tool set

23 for assembling or dissasembling oil filters in restricted access area used with ratchet 3/8" and proper extension bar M » NEW M NEW M M Material: tool steel St14 / DC04; Max. allowable torque: 140 Nm Surface: coated with electro-black oxide finish for rust protection 1977/6 Oil-filter wrench

24 dimensions (mm) 17, 19, 22, 24 are used for the removal and fitting of front wheels NEW made according to standard DIN 7422; min. allowable torque: 569 Nm socket ½: material 25CrMo4, Hardened and tempered HRc; Surface finish: chrome plated EN12540 Bit S17/S19: mat. 50CrV4; hardened and tempered 47-50HRc; anticorosive oiled Bit S22/S24: mat. C45, hardened and tempered 44-48HRc; anticorosive oiled 192/2HX Hexagonal screwdriver socket 1/2

25 It is used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out. The bearing is extract with a 1 kg weight Ergonomic heavy duty double component handle Arm: Material: special tool steel 42CrMo4; Hardened and tempered HRc Surface finish: blacken to standard DIN /2BI Inner bearing puller


Download ppt "Www.uniortools.com MOTORBIKE TOOLS Igor Žmavc December, 2013."

Similar presentations


Ads by Google