Presentation is loading. Please wait.

Presentation is loading. Please wait.

Initial Login Screen Enter username and password

Similar presentations


Presentation on theme: "Initial Login Screen Enter username and password"— Presentation transcript:

1 Initial Login Screen Enter username and password
Check “Remember Me” to autofill username for future logins Tap OK to login (updated August, 2017)

2 Select Carrier Tap on your carrier company Tap OK

3 Select Tractor Tap on your tractor Use the search field if needed
Tap OK

4 Select Trailer Tap on your trailer Use the search field if needed
Tap OK

5 Select Current Status Choose your status for the start of your day.
Check limits on the left and scroll down below Period Limit to check Consecutive Off Duty Hour to verify you’ve reached your reset hours.

6 Home Screen This is your home screen

7 Uncertified Logs Upon login, POV will remind you if you have any uncertified log book days. Choose to certify Log Book or Not Right Now

8 Shipping Document Number / Bill of Lading
Add your shipping document number, Bill of Lading, or other information about your load. Will accept letters, numbers, symbols up to 40 characters

9 Change Duty Status Change your duty status

10 Change Duty Status Choose duty status or check limits.
While connected to your vehicle, duty statuses will automatically move to driving when the vehicle is moving 5mph or more and prompt the driver to move to On Duty, Not Driving when the vehicle is not in motion after 5 minutes. After 1 minute of inaction by driver, POV will automatically move the driver to On Duty, Not Driving status.

11 Status Your status button will show the time remaining on your soonest Hours of Service limit. Tap to see Hours of Service limits.

12 Status Screen See your hours of service time limits on the left. Timers will turn orange with 30% time remaining. Timers will turn red with 10% or less left of your limit.

13 Recap Screen Recap will show your daily totals for the last 7 days

14 Status Screen Another way to change your status is to use the status button here on the Status Screen

15 Special Status To access Yard Move if you have permission, tap On Duty Not Driving

16 Special Status Tap the check box next to Yard Move and state a reason in the box. Choose OK Once in Yard Move status, your vehicle will not automatically make status changes. Uncheck Yard Move to return to normal operation of POV

17 Special Status To use Personal Use of CMV if you have permission, select Off Duty

18 Special Status Check the Personal Use of CMV box
Enter your reason in the box, and select OK Once in Personal Use of CMV status, your vehicle will not automatically make status changes. Uncheck Personal Use of CMV to return to normal operation of POV

19 Status Screen - Cycle Buttons on the right allow you to change any of the options you’ve selected through the login process. If you have permission to change cycles on your tablet, you will see the Cycle button on the Status Screen

20 Status Screen – choose Cycle
When you select a new cycle, your limits will recalculate automatically allowing you to stay compliant with the new cycle. Your cycle will also appear on your log book page

21 Lock Screen with Job/Message
When your vehicle is moving, POV will only show a lock screen. All other apps are unavailable when in the lock screen. **If you use another app for navigation, open that app before your vehicle is in motion.

22 Jobs The jobs button will show how many jobs are in your queue. Tap there to see your jobs

23 Jobs List Any assigned jobs will show in a list

24 Jobs - Tasks Tap on any job to see the stops for completion. Click on each step to complete

25 Jobs – Task Completion After completing any job task click done and choose either done to stay on this page or done and next task to see the next task from your list.

26 Jobs – Form When filling out a form, add all information your company requires. Make sure to save.

27 Jobs – In Progress When looking at your task list, any completed step will be a lighter color. Any steps in progress will show “In Progress”

28 Jobs – Navigate Any navigation step will have a navigate button to open your google maps for turn by turn directions.

29 Jobs – Tasks on Main Screen
Jobs can be completed directly from your home screen without having to tap on your jobs button.

30 Self Dispatch Use New Other Job to self dispatch a job while in the field.

31 Self Dispatch Choose the type of job or job template from your list of job types and fill out the appropriate fields..

32 Log Book Tap Log Book to see your log book pages

33 Log Book See your name and cycle, date and time zone, duty statuses on the graph and locations. Tap on the calendar to change dates and to see if past days are signed & certified

34 Log Book Calendar The black check circle on calendar days shows which days are certified. Tap on any day to go directly to that day.

35 Log Book Unsigned Days Tapping on Aug 17 from the calendar menu brings you to that date that is uncertified. Tap on the orange Certify button to sign & submit that log day.

36 Log Book Certify Certify log days by tapping the Certify Button and Agree. Tapping not ready will leave this day uncertified.

37 Log Book Digital Signature
After certifying a log day, your name and the time will be your digital signature

38 Log Book – Data Details Hidden data drop-down is revealed by tapping gray bar. Details are required by FMCSA

39 Log Book – Log Table – below graph
Scroll below graph and see a table of all log events. With the Duty Statuses Only box checked, see just duty status changes in the event type/status column

40 Log Book – Log Table – below graph
Scroll below graph and see a table of all log events. With the Duty Statuses Only box unchecked, see all events including login, logout, certification of logs, intermediate records as required by ELD and more. Tap on any row to get an edit menu.

41 Log Book Annotation from event table
Edit the details of any status event. Driving statuses cannot be changed to non-driving statuses Time cannot be edited.

42 Log Book – Event Table Insert Record
If you need to change the time of a record, you will instead insert a new record at that time. Use the (+) symbol to insert missing records. Choose the dated and time of the new record. Then choose the duty status of the new record.

43 Log Book – Event Table Insert Record
If you need to change the time of a record, you will instead insert a new record at that time. Use the (+) symbol on the lower right of the graph to insert missing records. Choose the dated and time of the new record. Then choose the duty status of the new record.

44 Log Book Annotation from status dot
You may also tap on an event dot on the graph to edit a status record that already exists. Or tap and hold and you can add a new event where you placed your finger.

45 Inspection For Pre and Post trip inspections, tap inspection

46 Driver Inspections Use Last Inspection to check for last inspection defects

47 Driver Inspection Review
Defects will appear in pink.

48 Sign & Submit DVIR Review
All defects must be certified as corrected or that the need not be corrected for safe operation of vehicle BEFORE the vehicle/trailer can be in service.

49 Driver Inspections To log a full inspection, use the Inspect Vehicle button

50 Driver Inspection Form
Check all passed at the top Next find the inspection point that has a defect (if any) Type a detailed note about the defect

51 Sign & Submit DVIR Certify by tapping sign & submit.
**You can make notes on PASSED items that will be delivered back to OneView

52 Fuel Record Tap fuel to record a fuel purchase

53 New Record Tap New Record to add fuel record

54 Fuel Record Fuel records will default to the truck you are currently driving. To change to another tractor or trailer, use the change button on the top right. Invoice Number is optional. Enter all other information. Make sure that your date includes the actual time you were at the fuel pump.

55 Seller Info – Option 1 (GPS)
In the Seller, use Powered by Google (your tablet’s gps) to select the station you are at. If you don’t see your station, tap the blue pin in the upper right corner

56 Seller Info – Option 2 (Manual Entry)
Fill in these fields about where you fueled up.

57 Scan Receipt Scan receipt will activate your device’s camera to take a photo of your receipt. Use the Change tractor button to attach this fuel record to a different tractor.

58 Saved Fuel Record(s) You will see your fuel records here. They will load to the cloud and disappear.

59 Messages You will see how many messages you have on your message tab. Tap to read.

60 Messages Tap on any of your messages to read

61 Replying to Messages You can read and reply to messages

62 New Message Create a new message by filling in these fields. You will only be able to send messages to people in your company.

63 OneView – Message Notification
In OneView, you can tell messages have been read by seeing the eye glasses next to the user’s name

64 POV Menu Use the POV menu to access other features of POV

65 Training Modules Use help button or help menu to access tutorials. Watch these interactive tutorials when using Wi-Fi. If you log into POV while on a WiFi connection, these tutorials will automatically download to your device allowing you to access them offline. You must do this if you are on a wired device. The cloud in the upper right corner will show the download progress.

66 Team Driving Use the POV menu to add up to 3 other team drivers (4 people total)

67 Team Driving The new team driver will login with their username and password at tap OK

68 Team Driving They will pick a non-driving status upon login
*They will not pick a carrier, tractor, trailer – it will keep these the same as the driver*

69 Team Driving On the team driver tab, they can choose “Make Me Driver” to assume the driving designation. Who ever is the driver will see a small steering wheel next to their name on the top name tabs

70 Team Driving If the team drive clicks Make me Driver, they will have to confirm by tapping Yes. They will now be the driver.

71 Team Driving When tapping on any name tab at the top, the user will have to re-enter their password and tap Unlock. If a team driver leaves and forgets to log out of the app, any team member can tap Sign Out on a team members tab and they will be deleted from this team driving occurrence. *This sign out button will not change their status to off duty.* When a team driver ends their shift, they should use the normal sign out process from their home screen.

72 Enforcement View During roadside inspections, use the Enforcement View to show your log book to law enforcement.

73 Enforcement View In Enforcement View, a DOT official can scroll up and down to see information, use the calendar to see the last 7 days and today, but they cannot edit anything accidentally. To see last inspection data, click on Driver Inspections

74 Enforcement View See the last inspection data.
Tap on Unidentified Records to view.

75 Enforcement View Cycle through days to see unidentified records on this tablet. Tap on Driver Logs to return to the log book.

76 Enforcement View Tap Exit to resume normal POV function.

77 Enforcement View The driver will have to enter their password and tap unlock to exit the Enforcement view.

78 About POV About POV will give you technical support information

79 Logs logs allows you or DOT to the last 7 days plus today’s log book pages **Canada 120/14 will send 14 days logs**

80 Sign Out After tapping Sign Out from your home screen, you’ll see three options. Sign out only will sign you out of this tablet in your current status. Certify, Then Sign Out will bring you to your log book where you can certify today’s log and then sign out in your current status (Use for Sleeper Berth) Go Off Duty, Certify, Then Sign Out will put your status as Off Duty, take you to your log book to certify today’s log, then sign out of the tablet.


Download ppt "Initial Login Screen Enter username and password"

Similar presentations


Ads by Google