High Gain Mystery of WS(1-5) Solved (Hopefully…) C.Woody HBD Meeting April 13, 2010.

Slides:

Advertisements

Similar presentations

Data Projector Setting Up/Connecting Laptop & Data Projector.

Advertisements

Operating Functions.

HBD HV Control and Monitoring System HV, P/T and Gain Variations Manuel Proissl HBD Meeting 04/06/2010.

1 Check all equipment is included before returning. If you have an accident or the equipment is damaged or you need support please contact Blaize

1 Short update Itzhak Tserruya HBD meeting BNL, April 11, 2006.

Report ~first collision Kotaro Kijima 2010/01/25 Local lab meeting.

HBD HV Control and Monitoring System A Gain vs. HV study throughout Run-9 – PART 2 – Manuel Proissl HBD Meeting 06/23/2009.

KLINGE’S NMR 262 Two Independent Systems Integrated into one Unit This Requires Special Features:  Total Redundancy of Refrigeration Components  Total.

Neutron Detector Shutdown Procedure 1.Turn Off Photomultiplier Tube High Voltages There are two HV channels per red module, each with it’s own black dial.

LSU 10/09/2007Project Schedule1 The Project Schedule Project Management Unit #4.

MUID Status: General Detector Health In addition to two disabled HV chains there are four other chains (out of a total of 600) that are largely or totally.

SSD Operations Manual March 2014 SSD: 4 th layer of vertex detector Heavy Flavor Tracker Silicon Strip Detector – Operations Manual PXL Inserted from this.

Static Pressure Control Loop The purpose of the static pressure control loop is to maintain an optimal static pressure in the ductwork. The control loop.

Booster Bias Supply Upgrade January 18 th, Ferrite Bias Supply Testing  Four thermocouples added to MADC  Monitoring: center winding, core, input.

The MINER A Operations Report All Experimenters Meeting Howard Budd, University of Rochester Jun 4, 2012.

July 29, Update on the HBD Gas System Modifications Robert Pisani Brookhaven National Laboratory.

The European Office Building S.H. Liem, A.H.C. van Paassen M.Verwaal, H.F. Broekhuizen Delft, April 1998 S.H. Liem, A.H.C. van Paassen M.Verwaal, H.F.

1 Stony Brook Update Stretching your LEGS T.K. Hemmick for the tent crew.

The MINER A Operations Report All Experimenters Meeting Howard Budd, University of Rochester April 1, 2013.

The MINER A Operations Report All Experimenters Meeting Howard Budd, University of Rochester July 8, 2013.

Looking at systems. What is a SYSTEM? The radiator makes the room warmer by turning ON when the temperature of the room is lower than required The THERMOSTAT.

HBD HV Control and Monitoring System A Gain vs. HV study throughout Run-9 – PART 1 – Manuel Proissl HBD Meeting 06/16/2009.

Time Meeting 2/3/2015 PHENIX Run-15 Status Douglas Fields PHENIX Run-15 Run Coordinator University of New Mexico.

Operation Sabbath Mode - SELECT PROGRAM - Lights, alarms and fans Normal Sabbath Overview.

S.MonteilPS/SPD COMMISSIONING1 PS/SPD COSMICS STATUS COMMISSIONING MEETING – JUNE W2 Large cosmics runs have been taken last week : THE POSITIVE.

The MINER A Operations Report All Experimenters Meeting Howard Budd, University of Rochester June 17, 2013.

1 HBD Commissioning Itzhak Tserruya DC meeting, BNL, April 11, 2007.

Muon System Safety Issues Burkhard Schmidt.

1 HBD Update Itzhak Tserruya DC meetingJune 10, 2009 June 10, 2009.

MOM Report Victoria Blackmore VC /06/11 1/7.

CM1 Thermal Cycle CM1 Warmup –1/4/12 (Wed.) to 1/6/12 (Fri.) (~50 hours) –Verified turbo interlock system works CM1 Cooldown –Began 1/9/12 (Monday) –At.

Electrical Faults Open Circuit

Progress Completed Order/Fabricate SS Piping for HBD Purge gas from all detectors DAQ tests Prep. for Shutdown work (open doors, move carriages, etc. Pave.

1 HBD Update: DC Meeting June 2006 Thomas K Hemmick for the HBD Crew…

Reser- Voir Turbo Pump 1 Five- Fold Turbo Pump 2 Scroll Pump1 Scroll Pump2 Tgt. Cham- ber N2N2 H2H2 P2 P1 P3 P4 P5 P6 Panel Tgt. Cell V2V1 V3 V0 E0 E1.

HBD Gas and QE Monitoring Craig Woody BNL HBD Working Group Meeting October 19, 2005.

HBD electronics status All the ADC and XMIT boards are installed. –Top 3 crates are for the ADC, XMIT boards –Bottom crate is for test pulse boards/future.

1 Sasha Milov DC meeting... March 7, 2007 HBD status Sasha Milov March 7, 2007.

S.MonteilCOMMISSIONING1 PS/SPD ELECTRONICS OUTLINE 1)STATUS OF PS/SPD FE BOARDS PRODUCTION 2)PHASES OF PS/SPD COMMISSIONING 1)LEDs AND DETECTORS 2)TUBES.

HBD Status for Run 10 C.Woody For the HBD Group Collaboration Meeting January 15, 2010.

Installation of Shades and Scintillation Cube C.Woody, M.Durham, J.Kamin B.Azmoun, A.Caccavano HBD Meeting April 29, 2007.

NA62 straw tracker DCS Straw tracker overview Bulk power supply Power supply distribution and monitoring LV + monitoring HV Temperature monitoring Gas.

9/18/2003Safety Review Electronics Electronics design LV, HV power supply Fusing Heat.

Status of the PSD upgrade - Problems with PSD in Be runs - Modification of cooling system - New temperature control - Upgrade of HV control system - MAPD.

1 PHENIX Status Ed O’Brien for John Haggerty Brookhaven National Laboratory June 23, 2009.

1 Stony Brook Update: Another Frustrating week... However difference is isolated: CF 4 T.K. Hemmick for the Tent Crew.

Plans to Test HBD Prototype in Run 6 Craig Woody BNL DC Meeting March 8, 2006.

PHENIX Safety Review Overview of the PHENIX Hadron Blind Detector Craig Woody BNL September 15, 2005.

HBD Status Report from Run 9 Craig Woody BNL DC Meeting July 8, 2009.

HBD Report Craig Woody BNL DC Meeting January 7, 2009.

1 HBD Commissioning Itzhak Tserruya DC meeting, BNL December 13, 2006 Progress from October 3 to November 28, 2006.

HBD HV Control and Monitoring System STATUS UPDATE Manuel Proissl HBD Meeting 03/04/2008.

PHENIX WEEKLY PLANNING 3/02/06 Don Lynch. BLM Test.

S.MonteilPS/SPD COMMISSIONING1 HW Maintenance – JANUARY Clermont team Outline: 2009: restart the system: few observations. Hw maintenance C-side:

Gamma-ray Large Area Space Telescope Tower 1 TVAC tests Bad ladders issues.

Preparations to Install the HBD for Run 6 Craig Woody BNL PHENIX Weekly Meeting January 26, 2006.

HBD HV Control and Monitoring System RUN-9 UPDATE Manuel Proissl HBD Meeting 04/08/2009.

1 Top Level of CSC DCS UI 2nd PRIORITY ERRORS 3rd PRIORITY ERRORS LV Primary - MaratonsHV Primary 1 st PRIORITY ERRORS CSC_COOLING CSC_GAS CSC – Any Single.

1 Some updates on water and other items… Stony Brook HBD Crew…

Recent Gain Changes C.Woody HBD Meeting March 23, 2010.

Update on HBD Activities at BNL Craig Woody BNL HBD Working Group Meeting November 16, 2004.

E.Gushchin,S.Filippov(INR,Moscow) 16 April 2008Calo commissioning meeting CERN PS/SPD LED monitoring system status General status LED signal is used for.

HBD HV Control and Monitoring System STATUS UPDATE Manuel Proissl HBD Meeting 01/19/2009.

The MINER A Operations Report All Experimenters Meeting Howard Budd, University of Rochester Sep14, 2015.

Power consumption (Watts) LBB27 ROS18 TSC50 TIM8 1 SC crate416 Alignment20 TOTAL per rack906~1 kW X2J22X2J02 With a water flow of 10 l/min, it should.

Chamber Design and Integration RE3/1 and RE4/1

Noise analysis of the 1m3 DHCal test beam

Error codes for split systems

week coordination report 15/06/2018

CSC DSS Status Report by Fred B.

Presentation transcript:

High Gain Mystery of WS(1-5) Solved (Hopefully…) C.Woody HBD Meeting April 13, 2010

C.Woody, HBD Group Meeting, 4/13/102 Chain of Events Preamp boards on WS(1-5) trip off around noon on March 16 th. HBD LV control panel indicates cooling air flow fault. Cannot turn preamps back on. Requires access to fix. All readout board temperatures look ok. Get Controlled Access about 1 hour later. HBD HV and all PHENIX magnets are left on. After entering the IR, we find the air flow indicator light to WS(1-5) shows low air flow. Frank Toldo feels all four fans and determines they are running. Adjusts sensor on WS(1-5) ~ 1 mrad. Indicator light immediately comes back on and indicates airflow is OK. John Haggerty cycles power on all 4 LV crates and does a complete feed. All crates come back on and feed works fine. Everything seems ok.

C.Woody, HBD Group Meeting, 4/13/103 Chain of Events (cont’d) Starting immediately with the next run taken, the gains on WS(2-5) look high. WS1 looks ok. Check electronics, noise, gas, etc. Everything looks fine. Problem persists for ~ 3 weeks. Get access on April 7 th to fix partial short on WS5. In the process, Bob notices that the back panels of all the WS modules feel warm. Also no hissing sound of airflow as on WN. Frank checks fan again and determines that it is not working (no air flow, yet sensor says it is ok). Fan is changed and airflow is restored. Gains of WS(2-5) return to normal starting with the next series of runs.

C.Woody, HBD Group Meeting, 4/13/104 Probable Cause Lack of cooling on WS modules caused local temperature to go up (rear panels were heated, heating gas in the region of the GEMs where all the gas gain takes place), yet overall temperature of the detector (as measured on the bottom near the gas input) hardly changed (see following plot). Higher local T caused local P/T to be lower, increasing the gain for these modules. Effect was worse on WS4 near the top (heat is partially trapped) and least on the bottom. WS5 has more room to vent.

C.Woody, HBD Group Meeting, 4/13/105 Why wasn’t this found earlier ? Air flow sensor for WS(1-5) indicated air flow was ok, but it clearly was not (sensor fault ?) Readout board temperatures did not show any large increase (although these are not monitored carefully, or recorded…) We didn’t notice the small increase in overall detector temperature (~ 1 deg) So, it took a while, but it looks like we solved the mystery...

C.Woody, HBD Group Meeting, 4/13/106 Temperature Change Around March 16th

C.Woody, HBD Group Meeting, 4/13/107 West Module Gains