© 2012 Autodesk Go Beyond Design: Using Autodesk® Fabrication Software to Extend Design Intent Peter Jackson Premium Support Specialist AEC/ENI

© 2012 Autodesk Peter Jackson Premium Support Specialist AEC/ENI  Worked within Engineering & CAD industry for the last 14 years.  The last 4 years have been spent working at MAP Software, which was acquired by Autodesk in Oct  Now focused on Premium Support for Autodesk Fabrication Portfolio. Presenter Introduction

© 2012 Autodesk Agenda  Class Summary / Learning Objectives Overview  Key Learning 1. Set up Autodesk Fabrication products for effective use 2. Extend design-intent models from Autodesk Revit 3. Use Autodesk Fabrication design line functionality 4. Extend design-intent models from AutoCAD MEP  Q&A

© 2012 Autodesk Class Summary Overview In this lab, you will get hands-on experience with Autodesk® Fabrication FABmep™ and Autodesk® Fabrication CADmep™. We will explain the best practice setup process to use design line technology within Autodesk Fabrication software to efficiently convert engineering design intent models from Autodesk® Revit® and AutoCAD® MEP software. We will also cover how to use Autodesk Fabrication software to support detailing, prefabrication, fabrication, and installation.

© 2012 Autodesk Learning Objectives Overview At the end of this class, you will be able to:  Best practices to set up Autodesk Fabrication to optimize Design line  Extend Autodesk Revit models to Autodesk Fabrication FABmep  Explain How Autodesk Fabrication design line functionality for modeling works  Extend AutoCAD MEP models to Autodesk Fabrication CADmep

© 2012 Autodesk Learning Objective Extend design-intent models from Autodesk® Revit®

© 2012 Autodesk Pre-requisites Autodesk® Revit®  Systems configured with required Families  System Classification / System Type configured  Visibility / Graphic Overrides configured  Elevations for the building environment configured Autodesk Fabrication products for effective use to convert engineering design intent models

© 2012 Autodesk  System configured with required Families Pre-requisites Prior to Conversion Autodesk® Revit®

© 2012 Autodesk  System Classification / System Type Pre-requisites Prior to Conversion Autodesk® Revit®

© 2012 Autodesk  Visibility / Graphic Overrides configured Pre-requisites Prior to Conversion Autodesk® Revit®

© 2012 Autodesk  Elevations for the building environment configured Pre-requisites Prior to Conversion Autodesk® Revit®

© 2012 Autodesk Pre-requisites Fabrication FABmep® / CADmep®  Services / Service Templates configured  Specifications configured  Button Codes / Mappings  Sections for the building environment configured Autodesk Fabrication products for effective use to convert engineering design intent models

© 2012 Autodesk Layer created for Equipment items Layer created for Supply Ductwork Rectangular and Round  Services / Service templates configured Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk Service using Service Template of the Content Item Folder of content Item Folders  Services / Service templates configured Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk Service Template in use Service Buttons Service Name Service Tabs  Services / Service templates configured Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk Service Types and Layer Tags screen Service Layering setup Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®  Services - Layering

© 2012 Autodesk  Specifications Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk  Service – Button Codes Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk REDILTEE = Straight Shoe and RedInline  Service – Button Mappings Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

© 2012 Autodesk Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®  Sections

© 2012 Autodesk Learning Objective Extend design-intent models from Autodesk® Revit®

© 2012 Autodesk Work Flow Part 1 Investigate : ADSK MEP Building Layout.rvt  System with Families Pre configured  System Classification / System Types Pre configured  Visibility / Graphic Overrides Pre configured  Elevations for the building environment Pre configured Hands on Exercise #1 Extend design intent-models from Autodesk® Revit®

© 2012 Autodesk Work Flow Part 2 Exporting system : ADSK MEP Building Layout.rvt  Selection Methods of a System  Determine Design Line Elements  Determine Graphical Elements  Exporting Revit system data into a “Revit Interchange File” (*.RIF) Hands on Exercise #1 Extend design intent-models from Autodesk® Revit®

© 2012 Autodesk Work Flow Part 3 Importing : Autodesk® Fabrication FABmep®  Enabling “Data Exchange” tool bar  Utilising “Data Exchange” to Import Revit Interchange file (*.RIF)  Configuration of RME Mappings  Exporting Autodesk® Fabrication FABmep® into Fabrication CADmep® Hands on Exercise #1 Extend design intent-models from Autodesk® Revit®

© 2012 Autodesk Work Flow Part 4 Investigate : ADSK MEP Building Layout.dwg  Activating a Design Line within the model  Erase & Fill items on a Active Design Line  Observation of Button codes / Button mappings  Design Line fill priorities Exclusion of items within a Service Template Use Autodesk® Fabrication CADmep® design line

© 2012 Autodesk Learning Objective Extend design-intent models from Autodesk® AutoCAD MEP®

© 2012 Autodesk Work Flow Part 1 Investigate : ADSK Pipe Model.dwg  Utilising the AutoCAD MEP to Fabrication CADmep ABSconvert.dll  Selection Method of a System  Exporting system data into a AME import file Extend design-intent models from AutoCAD MEP®

© 2012 Autodesk Work Flow Part 2 Importing : Autodesk® Fabrication FABmep®  Enabling “Data Exchange” tool bar  Utilising “Data Exchange” to Import AME file  Exporting Autodesk® Fabrication FABmep® into Fabrication CADmep® Extend design-intent models from AutoCAD MEP®

© 2012 Autodesk Summary Go Beyond Design Extend Design Intent from Autodesk Revit and AutoCAD MEP to Fabrication®

© 2012 Autodesk Q&A Go Beyond Design Extend Design Intent from Autodesk Revit and AutoCAD MEP to Fabrication®

© 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.