1. Water! Water! Quenching Your Thirst for Water in AutoCAD® Civil 3D®
Cyndy Davenport
Design Systems Implementation Manager

2. Class Summary
Stop forcing pressure pipes into your pipe networks. In this class, we will demonstrate a workflow that enables you to create curved pipes horizontally and vertically, create structures in both plan and profile without touching Part Builder, and create a dynamic set of labeling tools to complement your pipes using alignments, profiles, points, and projections.

3. Learning Objectives At the end of this class, you will be able to:
Modify your pressure pipe layout
Develop styles and labels that will support your pressure pipe workflow
Use Civil 3D tools to lay out your pressure pipe
Configure design checks to aid with horizontal and vertical layout

4. Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.