The Main Aim or Objective of the Project is to captured Real time Geo Co-ordinates with Geo- Tagged photograph of the 11 / 33 KVs North Bihar Power Distribution Company Limited electrical assets and further superimposed over NIC GIS Based web portal i.e., IBHUGOAL

 This is the first screen of this App. It is automatically disappear and launch the login page.

 The message shows that the internet connection is not available.  Internet connection must be available For the first time login.

 After entering valid user Id and Password, you get confirmation message and fetch data from the server and navigate to the Home page.

 This is the home page where users can navigate according to their requirement.  Now here we will click Register New Pole button.

 When you click Register New Pole Button, you navigate to the Pole Registration Page.  Here two buttons, First for Common properties of the Pole and second for individual unit details.

 When clicked Fill Common Details Button, Common properties Segment will be visible and Button will be changed to Hide Common Details.

 After filling common details properties you will be navigated to this screen again but at this time Remaining[2] changed from 0 to 2.  Then You are able to click Add Pole Details Button.

 When you click Add Pole Details, a dialog box will appear with several fields.  Here we fill 33kv voltage label details.

 After filling all details a list view will be shown containing all details you have entered.  After That Remaining[1] will be decreased from 2 to 1.  Now again clicked add pole details while remaining is greater than 0.

 Now again fill another feeder properties in Add Pole Details.  Here we took 11kvVoltage Label.

 If DTR is available in 11kv, then we select YES in ‘Is DTR Available?’ column.  Then DTR Details Properties will be occurred and then filled them.

 After filling all fields of pole detail a list will be displayed containing your entered data.  When remaining[0] will be 0 then we able to proceed to take Photo of the relevant Pole.

 In this page you have to take at max four photograph of the appropriate pole which details has to entered in the previous Page.  At first time only first button will be active. After taking 1 st photograph 2 nd button will be active and so on.

 Camera View will be opened and will wait for GPS.  When Latitude and Longitude appeared you are able to take Photo.

 After Taking Photo the image will be shown as like in the picture and 2 nd photo button will be active.

 This is the home page where users can navigate in according to their requirement.  Now we have to clicked Show Pending Button.

 User can see the captured details and check the entered data is correct or not.

 If the data was wrong or improper way then user can pressed long, then a alert dialog box will appear. If you click yes then data will be deleted permanently.

 This is the home page where users can navigate in according to their requirement.  Now we have to clicked Show Map Button.

 With the help of map activity user can see the point of GPS Location of the registered Pole.

 This is the home page where users can navigate in according to their requirement.  Now we have to clicked Upload Pending Button.

 When we clicked Upload Pending button in the home page a alert dialog will be appeared.  As you clicked Yes Button then all the pending data will be sent to the server and then also deleted from the mobile database.