1. PMAY- G GEO Tagging Manual

2. Home Screen of (AwaasApp)
For Inspection Login, user can click on inspection login option on home screen and get two options online and offline.

3. Inspection Login (Online)
After click on Inspection login, user can access online mode of Inspection.

4. Inspection login
The Inspection can be takes place at Block as well as on Gram Panchayat level using the respective user credentials.
Username and
Password of respective Block or GP.

5. Search Using Location
To upload the beneficiary site photo, user has to select INSPECTION MODE and then click on “Search Using Location” as displayed in the snapshot.

6. Beneficiary Location
After clicking on inspection, user has to select the (Fin-Year , Scheme, Panchayat , Village) one by one and click on Next.
Fin-year
Scheme
Panchayat
Village

7. Beneficiary List
After selection of location, a list of respective beneficiaries will display.
User can search the beneficiary by beneficiary name or registration ID or can select from the list

8. Beneficiary Inspection Details
As shown in the snapshot the user is able to upload the image for the following levels.
Existing Site
Vacant Site
**NOTE-:
Level wise, user can upload at least one image up to maximum three images .
1st inspection for respective existing site and then
2nd inspection for respective vacant site.

9. Geo Tagging Image Uploading
After clicking the image by mobile and user can upload the image or save in offline.
To upload accurate image, the Location accuracy value (i.e. 20 in snapshot) should be low as much as possible.
If this value is high, the user should be either wait for the proper network or try another direction at site location.
After capturing images user can send the images to either directly to the central server or can save offline and sync the data.

10. Inspection Login (OFFLINE)
In case of internet unavailability, the user can inspect the site through Offline login also.

11. Offline Data Mapping
Offline data mapping have four sections as shown in the snapshot.
1. Login Credentials – SYNC:-
User Login by using Block or GP login Credentials to sync the data.
2. Village And Panchayats-SYNC:-
After Login user can Sync village and panchayats to use offline inspection.
3. Schemes And Other Required Details -SYNC:-
After sync of both above sync ,user can sync schemes and other required detail to get the data .
4. Beneficiary Details-SYNC:-
After sync above all three detail, user will sync the beneficiary details with respect of selected financial year.

12. Beneficiary List
After clicking on inspection, user has to select the (Fin-Year , Scheme, Panchayat , Village) one by one and click on Next.
Fin-year
Scheme
Panchayat
Village

13. Respective Beneficiary
After selection of location, a list of respective beneficiaries will display.
Select any beneficiary for GEO Tag from the list

14. Beneficiary Inspection Details
As shown in the snapshot the user is able to upload the image for the following levels
Existing Site
Vacant Site
**NOTE-:
Level wise, user can upload at least one image up to maximum three images .
1st inspection for respective existing site and then
2nd inspection for respective vacant site.

15. Geo Tagging Image Uploading
After selecting the Level user an upload the photo
To upload accurate image, the Location accuracy value (i.e. 20 in snapshot) should be low as much as possible.
If this value is high, the user should be either wait for the proper network or try another direction at site location.
Select any Beneficiary level to
upload the photo and can save offline

16. Upload offline data
User can sync offline data to server by going online and select upload data
Select upload data to upload
offline data save upload the photo

17. Upload offline saved data
User can upload multiple and single record of beneficiary data to server or delete record if data is not correct by using check box which is saved by offline mode.
User can view the capture image by using View Image button.

18. THE END