How to Clean the NEC NP 600/500/400 NP300/500W/NP600S/NP500Ws Projector Filter By Deb Doebler 2/2011
Instructions for Cleaning the Filter 1. Turn off your NEC projector by flipping the power switch on the back of the device. Unplug the projector's power cord. 2. Locate the projector's filter, located on the back right corner of the device. Lift the filter up and out of the device by its grooved edge. Depending on the model, the filter may pull up or out. 3. On the sponge-like filter, use a soft-bristled brush or flick the dust with your finger into a trashcan to remove any lint and dust from both sides of the filter. 4. Place the filter back into your NEC projector, plug in the device's power cord and power on the projector. The filter will only slide back into the projector if it is properly aligned. 5. Go to next slide for resetting the projector so the Clean Filter message no longer appears.
Resetting the Filter Usage Time 1. Press the "Menu" button on the NEC projector's remote control. Use right button arrow to navigate to the “Reset" tab using the right arrow button and press “Enter.” 2. Press the down arrow button to navigate to the “Reset Hours" option. Press "Enter.“ 3. Select "Yes" to confirm you want to reset the filter usage time. Press "Enter" to complete the process. 4. Press “Menu” to exit. Download manuals can be found at this site. Find the model # and click to the manual download page for the PDF file.
Tips & Warnings Clean your NEC projector's filter every 100 hours of operation for normal operation or environments. In dusty environments, clean the filter more often. Do not use soap and water to clean your projector's filter, as this will damage the filter's membrane. Read more: How to Clean a NEC Projector Filter | eHow.com filter.html#ixzz1FGLmV3psHow to Clean a NEC Projector Filter | eHow.com filter.html#ixzz1FGLmV3ps Video on You Tube: How to clean the filter. Please watch at home as this site is filtered at school. w w Another video site that may be helpful ector-Cleaning ector-Cleaning