IntelaTrac: The Right Tool for the Job
The Symbol AppCenter: Tap this icon to open the IntelaTrac software
Checking Battery Charge Levels: Open the Tools menu and select “About”
Checking Battery Charge Levels: MAIN: removable battery that will last ~6 hours on each full charge BACKUP: internal battery that is charged via the main battery Tap the icon
Refresh Transfer: A “Refresh” Transfer must be performed if the drop down boxes are “Grayed Out” Open the Tools menu and select “Refresh” Base, Role and User information is updated during a “Refresh” Transfer
The Log On Screen: BASE: select process unit or work location LOGON ID: select user network ID ROLE: select position in LOP requiring access to rounds PASSWORD: four digit clock number by default
Loading Scheduled Rounds: A prompt will request to Transfer rounds to the Handheld Tap “Yes” to initiate the Transfer Tapping the icon will initiate a Transfer as well
VibTool Error Message: Handheld has been configured to use, but can’t connect to, a VibTool device Tap “OK” to close this error message
The Home Screen: Status icons can be used to determine each round’s Status New: In-Progress: Completed:
On-Demand Rounds: On-Demand rounds are available at any time Open the Tools menu and select “Procedures On Demand”
Selecting On-Demand Rounds: Place check marks in the boxes to select On-Demand rounds Tap the icon
Loading On-Demand Rounds: Select “Yes” to Transfer requested On-Demand rounds to the Handheld
Opening Rounds: Highlight the title of the desired round by tapping it Tap the icon
Peripheral Devices: VibTool Each VibTool is assigned a unique name (i.e. RedVib589) Open the Tools menu, select “Peripherals” and then choose “Select Input Device”
VibTool Configuration: Device Type: Select “dbPruftechnik VIBTOOL” Device Instance: Select VibTool’s unique name Device Field: Select “None” Tap the icon
VibTool: Properties Make sure that the “Read All Answers In Group” box is checked Tap the icon
VibTool: Save and Close Tap the icon The Home screen will display after the “Save and Close” command completes
Peripheral Devices: RFID Attach a SRM-2 RFID Reader to the bottom of the Handheld Open the Tools menu, select “Peripherals” and then choose “Select Search Device”
SRM-2 RFID Configuration: DEVICE TYPE: SAT SRM-2 RFID Reader DEVICE INSTANCE: Leave Blank Device Field: Place RFID Reader above tag and select “Refresh” Tap the icon
IntelaTrac Round: Task Groups As required, select the equipment’s current status from the drop down Tap the icons to navigate through the round
IntelaTrac Round: Tasks Tasks are completed using drop down lists, peripheral devices, the keypad or the Virtual Keyboard Tap the icon to advance to the next Task
Action Prompts: Responses will sometimes trigger an action, such prompting the user to supply additional information In this example, the user is being prompted to select a Default Note
Default Notes: Open the Tools menu and select Default Note Tapping the icon does the same thing
Default Notes: To expand each category, tap and hold the stylus on its title
Default Notes: Select appropriate Default Note Tap the icon
Default Notes: The Default Note’s full text will display Custom Notes can be created using the Virtual Keyboard Tap the icon to display the Virtual Keyboard
Save As Note: Tap the icon to save text as a Note Notes are uploaded during a Transfer and cannot be viewed across shifts
Save As Note and Virtual Log Entry: Tap the icon to save text as both a Note and a Virtual Log entry
The Virtual Log: All Roles in the Base can view Virtual Log entries from the previous Four Days Tapping the icon opens the Virtual Log as well
Closing In-Progress Rounds: Tap the icon to save and exit a round while it is In-Progress
In-Progress Rounds: Saving a round while it is In-Progress creates a new copy of the same round automatically In-Progress rounds can be reopened and completed as needed Information contained in In-Progress rounds will upload during Transfers
Closing Completed Rounds: At the end of each round, a prompt will ask if you want to mark the procedure as “Complete” Tap “OK” if the round is complete
Closing Completed Rounds: Open the Tools menu and select Completed Tap “OK” when the prompt asks if you want to mark the round as “Complete”
Transferring Rounds: Plug the Handheld into an open bay on the Docking Cradle Tap the icon to initiate a Transfer
Questions or Comments?