Template as part of temporary Services Support

Slides:

Advertisements

Similar presentations

Depending on number of homes and to maximize construction efficiencies, either a 8 way or 12 way tube bundle is deployed in the cut. At each drop, 1 tube.

Advertisements

Engineering Drawing Lecture 3

BumperBot uses two contact switches to go through a labyrinth. Bumper.

Click on this image to open the full PDF document.

L.C. Technology ROBOT ASSEMBLY. Base Assembly BASE File off raised tabs on each side of Servo. Place Servo in vice between Fibre Clamps. Raised Tabs Repeat.

NOvA Module End Caps & Manifolds 1.Threading: Time & Motion Studies 2.Attaching Manifolds to Scalloped Extrusions 3.Avoiding 2 Styles of Extrusions Tom.

Takashi Matsushita Imperial College T. Matsushita 1 Station 5.

DIMENSIONING The dimension line should be approximately 3/8” from the object and the extension lines should extend 1/8” beyond the dimension line. The.

G.Barber Tracker Update, Berkeley 10 Feb Tracker Progress Contents:- Station Space Frame Patch Panel / Vacuum Seal Light Guide Map Position of Degrader/Support.

Colorado Space Grant Consortium Foam Core Class #05 Foam Core Class #05.

Design bud box for super logics July Design for bud box We need to put the superlogics inside bud box and make a hole or other connection part.

1 Installation guidelines for Marlon CS rooflights into fibre cement roof.

SLHC - WP7 Barrel UPDATE on LAYOUT OF SERVICES AT THE BARREL ENDS OPTO PCBS: Sketches describe options after discussion with Tony Weidberg ( ) Preference.

LAUNCHER BASE PARTS B A D E F C G. LAUNCHER BASE PARTS B A D E F C G.

Marking Flags Presco

1 FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS PART NUMBER

Procedure of Connecting Coil Unit In series with Capacitor 10 April 14 Product: Fully Automatic Washing Machine.

ATLAS Upgrade ID Barrel: Services around ‘outer cylinder’ TJF updated According to the drawing ‘Preparation outer cylinder volume reservation’

Space Distances using Parallax 1. Your “telescope” is a box with a small pinhole on one side. The pinhole represents the lens on the outside of the telescope.

PANDA-90 DAEMMSTOFF INDUSTRIE KOREA LTD. 1. What is PANDA-90? PANDA-90 is a fire sleeve for P.V.C. and P.P.R. piping systems. The use of PANDA-90 is recommended.

Daya Bay Muon Subsystem Review, 7/28-29/2007, IHEP, Beijing Muon System PMT Cable Routing Kirk McDonald Princeton University (July 28, 2007)

How to Sew a Button Step by Step Instructions. Thread the Needle For buttons, you should double the thread to make the job quicker. Pull it through the.

Do you have the right phone model and number? Were you able to unbox, assemble and connect the phone? Has your phone registered to the VOIP system? What.

SCT Barrel 6 Support Bearing A full-scale model of the barrel 6 support bearing has been machined at UCL (drawing G.Barbier ) It was tried out on both.

PROSSER PUMP Long Beach Fire Department. BASIC SET- UP Components Main dewatering pump Junction box Attached power cord Additional extention cord.

Chapter 1 Making Healthy Decisions Practicing Healthful Behaviors Slide 1 of 3 Health in the Balance Materials Cut out a cardboard triangle that is 8 inches.

Herbarium Resources: Preparing Specimens & Investigating Plants.

Dance Pad Project By: David Dorsten. Understand  Electric Engineering Project = Dance Pad and Light Bulb Station  This activity will demonstrate the.

KEYWORD SEARCH. Click here to begin KEYWORD SEARCH.

Plenum Seal From Above This photo shows a Cross-over connection, below a plenum from above. The arrows point to a large gap. Close up of large.

Comments on Engineering talk by A. Catinaccio at Inner Tracker Engineering Meeting CERN ) Fixed length barrel layout drawing by C. Bault (Strawman.

Irradiations at Birmingham cyclotron Procedure 1.

T. Matsushita 1 News Ribbons - i Inspection at IC All five ribbons have production date Two ribbons have mold ID + production ID (e.g. mold4#1) One ribbon.

Three View Drawing Technical Drawing and Design Osbourn Park High School Mrs. House.

Memory gift box leahfung.typepad.com. memory gift box opened.

The reading is 7.38 mm. The reading is 7.72 mm.

Sit at tables Take notes on how to construct a Tetrahedron Kite.

or how to put together simple things simply

Fasteners and Cold Metal

Woodworking Hardware Ag Mech I Standard 6:4-5.

Anatomy and Physiology: Muscular System

Exploring the Magic of Electricity

Soxhlet Unit B Maintenance By: Shawna Brookes.

Lay two pieces of paper on top of each other. Fold paper “hotdog”.

BARREL 3 FIBRE ROUTE ORDER and HARNESS INSTALLATION ORDER]

44 splices just before PPB1 One octant Sleeved fibres main duct 396 f

Tiny Book Workshop!.

Hot-Air Balloons.

Syllabus Introduction to drawing Dimensions and scale

Services mock-up Full-scale mock-up of one half end-cap.

Lock fixed scale vernier scale Vernier Caliper jaws.

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

זכויות סוציאליות.

Collection Box Insert " w x 3. 75" h ( mm x 95

Collection Box Insert " w x 3. 75" h ( mm x 95

Building and Using a Quadrant p 153

Stock Balance RMA IND00SB215

The Project Demonstration and Documentation

Moving Pictures Sliders and Levers.

Label Name Label Name Label Name Label Name Label Name Label Name

Marvellous Motion Episode 1 1.

Presentation transcript:

Template as part of temporary Services Support extending from outside TE bulkhead by 200mm temporary position of clip whilst sealing Octant template behind services 60mm approx. Clip to template 60mm approx. grommet in TE bulkhead B6 B5 B4 B3

addition to the main services support to which connector A template is needed in addition to the main services support to which connector boxes are fastened 360 degs. Services support Services Support template TE bulkhead

fasten LMTs to template) Quadrant Services Support Template eg one octant of quadrant A1 with 12 LMT sets,4 fibre sets and one DCS bunch all in ‘grommet modularity’ 24 23 22 21 20 19 18 17 16 15 14 13 R outside TE bulkhead Labelled lines marked on Template indicate LMT route Slots in template for LMT clips (which fasten LMTs to template) Fibre bunch fastening to template Fix to services support DCS bunch fastening to template

Template made of Al sheet – marked with LMT positions etc for octant

LMTs clipped to template with clips away from bulkhead for sealing access between tapes

LMTs clipped to template close to bulkhead for sealing in grommets

Template with LMTs and one fibre bunch attached – tie threaded through holes