Laptop/PC GPRS Configuration for Windows XP

Ways of Connecting your laptop 1.Using Bluetooth 2.Using data cable 3.Using infrared link

Before starting… 1.Subscription to GPRS is a prerequisite 2. Confirm that the handset supports IR reception and same is available on your laptop 3.In case of connecting through data cable, make sure the data cable is attached and the mobile is detected by the computer

Laptop settings Click on to my computer and then control panel Click here

In printer and hardware option Click on to phone and modem setting Click on phone & modem

Phone and modem tab In the modem tab select standard modem over IR link

Phone and modem option Click on to dialing rules tab in the phone and modem option Press edit button Edit button

Edit location In the edit location window, click on to the general tab Select tone option Press ok Select tone

Phone and modem tab Click on the modem properties Click on to properties

Modem properties Select maximum port speed

Modem properties Click on to the advance tab and enter the extra initialization commands: NOTE: Please do not copy paste the mentioned string, Only manual typing is required. If your system is not being supported the above string then type the following string. For Post Paid AT+CGDCONT=1,"IP",ufone.internet For Pre Paid AT+CGDCONT=1,"IP",ufone.pinternet For U-Mail Account AT+CGDCONT=1,"IP",umail.internet For Post Paid AT+CGDCONT=1,"IP",ufone.internet;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31 For Pre Paid AT+CGDCONT=1,"IP",ufone.pinternet;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31 For U-Mail Account AT+CGDCONT=1,"IP",umail.internet;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31

Modem properties Confirm the correct initialization string, in order to avoid any errors while connecting Click on to the advance port settings Click here

In the advance port settings uncheck the use FIFO buffers Select the com number currently in use Press ok button COM in use

Click on to change default preferences button Select port speed to maximum Select hard ware flow control to none Press ok and exit modem properties Max port speed Flow control to none

Setting up a new dial up connection Go to my computer control panel Click on to network and internet connection Click here

Click on to network connection

Click on to create a new connection Click here

Click on to the next button on the new connection wizard Click next

Select connect to the internet option Press next button

Select set up my connection manually Press next button Select Press next

Select connect using a dial up connection Press next select Press next

Enter Ufone as ISP name Press next Enter Ufone Press next

Enter *99***1# in the phone number field Press next

Uncheck the options and leave the fields blank Press next

Press next button to finish to complete the connection wizard