Lighting Retrofit Assembly (LRA) Distributor Training

LED Distribution Products 1. Component Upgrade (Stock/Flow Components) I-Pack Drivers Provide value to channel with easy to use cross ref system, QuikCross. Project (Made to Order) 2. Basic Upgrade (Stock/Flow Projects) LED Retrofit Options Tube + Ballast Tube + Driver LRK Retrofit Kit LRA Retrofit Assembly Sign Tube Distributor Stock Distributor Stock & Home Center 3. Fixture Upgrade (Renovation Projects) Prismatic Troffer Volumetric Troffer Strip Luminaire Wall Pack Vapor Tight Industrial Bay Parking Garage Wrap Luminaire

LRA Overview Family of pre-assembled LED retrofit kits mounted on strip fixture panels. Available in a single 4’ panel configuration or two 4’ panels wired in tandem for 8’ strip fixture retrofits. Pre-mounted and pre-wired to further save installation effort and cost. Panels are designed for universal compatibility with multiple strip fixture manufacturers. Additional conformal coating allows for expanded applications in typical strip fixture locations – parking garages, unconditioned spaces, outdoor canopies Lumens Colors 2,300 3500K 3,000 4000K 4,200 5000K 4,600 6,000 8,400 Assembly includes: (1) or (2) EVERLINE® LED lensed modules pre-mounted (1) LED EVERLINE driver (0-10V dimming) pre-mounted (1) or (2) 4’ strip fixture panels Wiring, mounting hardware, installation instructions LRA28:

LRA Features & Benefits Key Features Retrofits 4ft or 8ft fluorescent strip fixtures to LED Fast and easy to install (assemblies are pre-mounted and pre-wired with quick connects to further save installation effort and cost) 23 Gauge painted steel panels are designed for universal compatibility with multiple strip fixture manufacturers LRA lightbars are DAMP rated allowing for expanded applications in typical strip fixture locations – parking garages, unconditioned spaces, outdoor canopies 3 CCT’s (3500K, 4000K, 5000K) 120-277 VAC Standard 0-10V dimming to 1% UL Classified UL1598C (US & Canada) Suitable for Dry or Damp locations DesignLights Consortium™ qualified 7 Year Limited Warranty

LRA Product Offering & Nomenclature For higher lumen requirements, two LRA14-60L8xx-U may be mounted in tandem to provide an 8’ solution at 12,000 nominal lumens.

LRA Shipping Details LRA14 pallet quantity is 80. There is no MOQ, but LRA assemblies ship on pallet only, they are not intended for parcel shipment. These fall under the fixture freight policy.

LRA Installation Disconnect power and remove lamps Remove the cover panels and lampholder sockets Remove fluorescent ballast(s) Hang the panel without the driver first, using lanyards provided Route red and blue leads through fixture center Secure LRA using ¼-turn fastener or drill-point screws provided Hang remaining panel using lanyards Wire the blue leads into the 3-position connector Wire the red leads into the 3-position connector Secure the ground wire (ground screw is provided if needed) Connect driver to branch circuit power Secure LRA using ¼-turn fastener or drill-point screws

Additional Resources Resources found on www.unvlt.com: LRK/LRA Brochure LRA Specification Sheet LRA Installation Instructions LRA Strip Fixture Compatibility Guide IES files Online Course on Universal University

Snap this QR Code and quickly access our website. Thank you Snap this QR Code and quickly access our website. Website: www.unvlt.com Nashville Customer Service: (800) 862-8666 Universal Technical Engineering Services: 1-800-BALLAST (1-800-225-5278)