Cut Paper With The Automatic Machine Technology And Engineering Sumber buku : Memotong kertas dengan mesin otomatis Penyusun : Agus Nugroho Editor : Endro Santoso HS

Teknologi dan Rekayasa LEARNING OBJECTIVES After learning of this study, students are expected to: 1. recognize piece of paper machine full automatic. 2. recognize type of paper cutter 3. execute paper-cutting program in accordance with engine conditions. 4. execute cutting paper cutter on full automatic. 5. reply formative tests.

Teknologi dan Rekayasa Automatic Image Cutter

Teknologi dan Rekayasa Make The Steps Of a.Check the engine cut. b. Turn the cutter with the power press. c. Tracks first paper will be cut.

Teknologi dan Rekayasa Make The Steps Of d.Set the data size cut on the panel are available. e. Place the paper on the table will cut income f. Running power press paper.

Teknologi dan Rekayasa Make The Steps Of g. Press the button to cut the paper until the paper has been truncated. h. Handel release paper and press the button lowering knife. i. Take the paper that has been cut and placed on the table paper

Teknologi dan Rekayasa Do Paper Cutting Paper should do the cutting in accordance with the concept and how the correct and appropriate steps to correct Technique the paper amputation Descend the blade paper

Teknologi dan Rekayasa Do Paper Cutting 1.Place for the cutting and cutting the rest of the prepared 2.Board palette prepared according to the needs of 3.Working equipment is prepared

Teknologi dan Rekayasa 4.Materials prepared according to the applicable specifications. 5.Computer programmed 6.Air cushion enabled and switched on the lamp shield

Teknologi dan Rekayasa 7. Material placed on the table cut in accordance with the procedures 8. Sample cutting is done, and the results reviewed. 9. Bulk cutting is done.

Teknologi dan Rekayasa 10.Once completed engine is turned off according to procedure 11.Cutting results stored in the appropriate fields 12.The workplace clean

Teknologi dan Rekayasa PARTS AUTO CUTTER

Teknologi dan Rekayasa Parts Of The Auto Cutter 1. Knife cut (knife blade) 2. Cushion cut knife is used to avoid any damage knife 3. The paper used for the press to not shake when will cut

Teknologi dan Rekayasa 4. Table cut To place a paper that will be equipped with a cut that can be slide forward or backwards. 5. Security Electronics such as lights on the right and the left engine

Teknologi dan Rekayasa Perform Maintenance On The Engine Component That Is Easily Worn 1. Cleaning engine components 2. Grinding a knife so that the sharpness of its security 3. An engine lubricant on a regular basis 4. Replacement parts