1. Technology And Engineering
GRAPHIC PRODUCTION
Glue the pon result
(folding-pack) with machine
GRA.PUR.016
Sumber buku : Mengelem hasil pon dengan mesin
Penyusun : Agus Nugroho Editor : Endro Santoso HS

2. After the end of learning, students are expected to be able to:
Learning Objectives :
After the end of learning, students are expected to be able to:
Know and identify sizing machine types
Adjust the sizing machine parts
Execute the sizing process
Run the sizing machine maintenance
Teknologi dan Rekayasa

3. Machine Form
The machining sizing process is done to the packed printed product type. But it also capable in other product type like an envelope.
The sizing machine divided into three categories according to its size, that is small, medium, and lagre
Teknologi dan Rekayasa

4. Sizing Machine Construction
Sizing machine has a construction which consists of several units.
The unit consists of:
Paper input unit
Glue distributor unit
Sizing unit
Output unit
Teknologi dan Rekayasa

5. Paper input unit consist of: Paper placement table Paper table
PAPER INPUT UNIT AND
GLUE DISTRIBUTOR UNIT
Paper input unit consist of:
Paper placement table
Paper table
Glue distributor unit consist of:
Glue container
Glue distributor roll that distribute the glue to the paper that wanted to be sized
Teknologi dan Rekayasa

6. Simple glue machine
Teknologi dan Rekayasa

7. SIZING UNIT
Sizing unit is an unit that run the sizing process to the printed sheet, it has a roll that distribute the glue from its container to the paper that wanted to be glued.
It also has the paper pressure adjuster unit to adjust the glue evenly on the paper surface
Teknologi dan Rekayasa

8. OUTPUT UNIT
The sized paper will leave the output unit and stick to its spouse. The result is a well sized product
Teknologi dan Rekayasa

9. RUN THE SIZING MACHINE MAINTENANCE
To make the sizing machine run properly, the machine should get a proper maintenance regularly.
The maintenance can be done with three main activity, that is:
Lubricating the particular parts
Cleaning the machine once the process is finish
Replace the worn/damaged parts
Teknologi dan Rekayasa