1. Technology And Engineering
GRAPHIC PRODUCTION
A bed sheet printing results manually
Sumber buku : Mengerjakan pelipatan lembaran hasil cetakan secara manual
Penyusun : Agus Nugroho Editor : Endro Santoso HS

2. LEARNING OBJECTIVES
After learning of this study, students are expected to be able to:
Understand and know the equipment and material to do a manual paper fold
Use the manual paper fold machine
Use the material to do the manual paper fold process
Do the manual paper fold
Answer the formative test
Teknologi dan Rekayasa

3. DEFINITION
Folding is to bend up a sheet up to 180 degrees, onwards further according to the amount of bending that needed.
Teknologi dan Rekayasa

4. Prepare The Work Furnished
1. Prepare the health and safety equipment, according to the regulation.
2. Prepare the folding equipment
Teknologi dan Rekayasa

5. Prepare The Work Furnished
3. Activate the temperature and humidity controller in the working room
4. Clean the work area clean from dirt and rubbish.
5. Turn on the light
Teknologi dan Rekayasa

6. Prepare The Work Furnished
Preparing Equipment And Materials That Wanted to Be Fold
Teknologi dan Rekayasa

7. 1. The folding process done according to the work order.
Work Furnished
1. The folding process done according to the work order.
2. Evaluate the work product.
3. Do the mass job
Teknologi dan Rekayasa

8. 4. Compile the work product
Work Furnished
4. Compile the work product
5. Save the work product to the appropriate place
6. Arrange the work report
Teknologi dan Rekayasa

9. Work Furnished
Folding with the folding bone
Teknologi dan Rekayasa

10. Work Furnished Fold with the folding knife and rolls
Teknologi dan Rekayasa