1. Cut Paper With The Automatic Cutter Machine
Technology And Engineering
GRAPHIC PRODUCTION
Cut Paper
With The Automatic Cutter Machine
Sumber buku : Memotong kertas dengan mesin otomatis
Penyusun : Agus Nugroho Editor : Endro Santoso HS

2. LEARNING OBJECTIVES
After learning of this study, students are expected to be able to:
Know and understand fully automatic paper cutter machine
Know the type of paper cutter machine
Execute the paper cutting program according to the machine condition
Run a paper cutting process using the automatic paper cutter machine
Answering the formative tests
Teknologi dan Rekayasa

3. Automatic Cutter Machine Figure
Teknologi dan Rekayasa

4. Check the cutter machine condition Turn on the cutter machine
Make The Working Steps
Check the cutter machine condition
Turn on the cutter machine
Track the paper that will be cut
Teknologi dan Rekayasa

5. Set the cutting size data on the available panel
Place the paper that will be cut to the inlet table
Press the paper pusher handle
Teknologi dan Rekayasa

6. Press the cut button to cut the paper until the paper has been cut
Release the paper presser handle and the knife lowering button
Take the paper that has been cut and place it on the paper table
Teknologi dan Rekayasa

7. Do Paper Cutting Technique the paper amputation
Descend the blade paper
Paper should do the cutting in accordance with the concept and how the correct and appropriate steps to correct
Teknologi dan Rekayasa

8. Prepare the place to put the cutting result and its remaining
Do Paper Cutting
Prepare the place to put the cutting result and its remaining
Prepare the palette board according to its need
Prepare the working equipment
Teknologi dan Rekayasa

9. Prepare the applicable specified material Do a computer programming
Enable the air bearing and turn on the safety light
Teknologi dan Rekayasa

10. Place the material on the cutting table according to its procedure
Do the example cutting and check the result
Do the mass cutting production
Teknologi dan Rekayasa

11. Place the cutting result in the appropriate place
Turn off the machine according to its procedure once the process is complete
Place the cutting result in the appropriate place
Clean the working field
Teknologi dan Rekayasa

12. AUTO CUTTER PARTS
Teknologi dan Rekayasa

13. Parts Of The Auto Cutter
Cutter knife (knife blade)
Cutter bearing, used to prevent knife damage
Presser, used to press the paper to prevent shaking or misappropriate paper position when cutting
Teknologi dan Rekayasa

14. An electronic lamp in the right and left part of the machine
Cutting table
To place the paper that will be cut, equipped with an adjuster that can be slide forward and backward
Safety
An electronic lamp in the right and left part of the machine
Teknologi dan Rekayasa

15. Perform Maintenance On The Engine Component That Is Easily Worn
Cleaning the machine parts
Grinding the cutter knife to maintain its sharpness
Lubricating the cutter machine regularly
Spare parts replacement
Teknologi dan Rekayasa