Panasonic UC Pro - Activation Keys installation - Rev1.1 16 Nov., 2015 1

Table of Contents 1. Overview 2. Ordering and Binding Flow 3. Procedure 4. Condition 5. Important Information about HWID binding

Table of Contents 1. Overview 3

1. Overview The UC Pro requires following types of Activation Keys. 1-1. Activation Keys for PBX CTI interface Activation Key type PBX type Model No. Installed to description CTI Interface KX-NS series KX-NSF101 PBX Allows the use of the CTI interface. KX-NSA020 Allows the use of CSTA Multiplexer. KX-NSX series KX-NSXF004 Allows the use of the CTI interface (incl.CSTA Multiplexer)

1. Overview 1-2. Activation Keys for UC Pro User (Commercial AK) Activation Key type Model No. Installed to description UC Pro user KX-UCPA0005W UC Pro Server UC Pro 5 Users KX-UCPA0010W UC Pro 10 Users KX-UCPA0025W UC Pro 25 Users KX-UCPA0050W UC Pro 50 Users KX-UCPA0075W UC Pro 75 Users KX-UCPA0100W UC Pro 100 Users KX-UCPA0250W UC Pro 250 Users KX-UCPA0500W UC Pro 500 Users KX-UCPA1000W UC Pro 1000 Users These AKs need Hardware ID binding. See chapter1-5. for details.

1. Overview 1-3. Temporary AK 1-4. Trial Mode “Temporary AK” means Activation Key for valid for a specific number of users, a maximum period of 45 days which starts from outputting. This AK should be used for the case that the server machine is crashed, etc. In that case, please contact your sales company/Distributor. (Finally, PSN CS section will provide the temporary AK.) * Temporary AK needs HWID binding. 1-4. Trial Mode UC server has pre-installed activation keys for 25users and 45days period from installation. So, customers can use UC Pro environment without additional Activation Keys for 45days up to 25 users. * Trial mode does not need HWID binding.

using Activation Key No. and HWID 1. Overview 1-5. Hardware ID (HWID) binding Activation Key (AK) for UC Pro user shall be bound with Hardware ID (HWID) that is generated according to the server condition to which UC Pro server is installed. The binding (authentication) is executed by HWID binding system. Activation Key Card* Internet UC Pro Server Hardware ID Binding system HWID * For each Server machine * Generated when UC Pro Server is installed HWID binding (Authentication) using Activation Key No. and HWID

2. Ordering and Binding Flow Table of Contents 2. Ordering and Binding Flow 8

2. Ordering and Binding flow 2-1 Ordering AK (CTI interface, UC Pro User) Ordering flow to purchase UC Pro user AK is as same as the flow to purchase CTI interface AK. Get Activation Key card (PDF file or CSV file or physical card) as same as other PBX AK. * Model No., AK type and AK No. is printed on Activation Key Card.

2. Ordering and Binding flow 2-2 Online HWID binding For when UC Pro Server is connected to Hardware ID Binding system via Internet. Dealer AK No. Hardware ID Binding system Dealer UC Pro Server 1 Register AK No., then require online binding 2 AK No. and HWID are bound and an Activation Keycode is generated. Then the Keycode is registered to the UP Pro Server automatically. Internet

2. Basic Configuration 2-3 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. 1 Dealer Enter Activation Key No. KMS UC Pro Server 3 Enter necessary information *1 HWID Binding Portal 2 Get necessary information *1 Hardware ID Binding system Internet Local LAN 4 6 Register Activation Keycode Get Activation Keycode 5 Generates Activation Keycode *1 The necessary information contains “Activation Key No.”, “HWID”, “Software version”, etc.

Table of Contents 3. Procedure 12

3.1 Online binding procedure For when UC Pro Server is connected to Hardware ID Binding system via Internet. Launch UC Pro Administrator tool Click “Add”

3.1 Online binding procedure For when UC Pro Server is connected to Hardware ID Binding system via Internet. Enter Activation Key No. 1. Enter AK No. 2. Click “OK”

3.1 Online binding procedure For when UC Pro Server is connected to Hardware ID Binding system via Internet. Execute HWID binding 1. Click “Bind license” 2. Click “Link license online”

3.1 Online binding procedure For when UC Pro Server is connected to Hardware ID Binding system via Internet. Once HWID binding is successfully executed, AK will be installed. AK is installed.

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Launch UC Pro Administrator tool Click “Add”

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Enter Activation Key No. 1. Enter AK No. 2. Click “OK”

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Get necessary information 1. Click “Bind license” 2. Click “Show details”

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Copy necessary information Save necessary information as a file, or copy necessary information to clipboard and then paste to a file, etc. Save as a file Copy to clipboard

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Access to HWID binding portal with PC which is connected to Internet. HWID binding portal is located on KMS web site (same as downloading AK files for PBX) https://kms.business.panasonic.net/kms/ Supported Browser: Internet Explorer 10, Internet Explorer11, Google Chrome 43, FireFox 34.

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Launch HWID binding portal. KMS Portal menu UC Pro Portal menu Click “HWID Binding” Click “UC Pro”

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Input necessary information Input necessary information using saved file, or paste necessary information. Upload the saved file Paste necessary information, then Submit request

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Once HWID binding is successfully executed, AK code will be displayed. Copy the AK code. xxxxxxxx

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Enter the AK code 1. Enter AK code you copied UC Pro Server administrator tool xxxxxxxx 1. Click “Add” 2. Click “OK”

3.2 Binding using Panasonic HWID binding portal For when UC Pro Server is NOT connected to Hardware ID Binding system via Internet. Once AK code is successfully installed, AK will be activated. AK is installed.

Table of Contents 4. Condition 27

4 Condition One AK is allowed to be bound with server machine twice for when server is crashed. 1. First installation AK 1 Server 1 Install OK Hardware ID Binding system Binding OK 2. The Server is crashed Server 1

4 Condition One AK is allowed to be bound with server machine twice for when server is crashed. 3. Second installation AK 1 Server 2 Install OK Hardware ID Binding system Binding OK 4. The Server2 is crashed Server 2

4 Condition One AK is allowed to be bound with server machine twice for when server is crashed. 5. Third installation AK 1 Server 3 Install NG Hardware ID Binding system Binding NG * Third time onwards, purchase new AK(commercial AK). * In the case that commercial AK is not in time, contact your sales company/distributor and get Temporary AK.

5. Important Information about HWID binding Table of Contents 5. Important Information about HWID binding 31

5 Important Information about HWID binding Descriptions: The Activation Key (AK) of UC Pro should be bound NOT to an MPR ID of the PBX but to a hardware ID of UC Pro Server. After the AK is bound to the hardware ID, activation keycode, which functions like the existing activation key file to be transferred to the PBX, is registered to the UC Pro Server to enable the user to use the UC Pro clients up to the numbers allowed by the AK of UC Pro. ATTENTION AK PURCHASER: - Hardware ID Binding shall be done within ONE YEAR after the AK is issued by Panasonic, If the period is expired,　THERE MAY OR MAY NOT BE THE CASE THE AK IS NO LONGER VALID TO CREATE THE ACTIVATION KEYCODE. - Be sure to inform your customers of the AK Delivery Date shown on the Panasonic e-commerce site at the purchase of AK. 　 As the AK Delivery Date is the same as the AK issue date, it is easy to understand for the customers the deadline of the Hardware ID Binding of the delivered AK. - Hardware ID Binding is possible up to two times, just for the case the user replaces the hardware of UC Pro Server　as the remedy when the server/hardware crashes. 　 The 2nd Hardware ID Binding for any other purpose is not authorised at all and shall be deemed as an abuse. PSN will take any reasonable, ethical and legal measure to prevent and stop such illegal act.

Table of Contents END 33

Modification 20150724-00 　5 UC Pro AK Installation_Rev1.0_24Jul2015.pptx - 1st release 20151116-00 　5 UC Pro AK Installation_Rev1.1_16Nov2015.pptx - P.21 : URL for KMS is added. - P.32 : Description of ATTENTION has been changed.