1. Welcome u How to use your Phone Effectively u Telephone Features u Voice Messaging Features

2. Telephone Features u Placing calls u Transfers, Consultation, and Conference Calls u Call Pickup u Forwarding Your Phone u UCAR Directory u Custom Services

3. Phone Types u Cisco 7910 Common areas 2 line display, single line phone u Cisco 7960 Standard office issue. Has a built-in speakerphone u Cisco 7914 Additional lines module All models have a data port

4. Placing calls u Within UCAR buildings Dial 4 digit extension u Local calls 9 + 10 digits (303 or 720) 9 + Toll free number (1-800 etc.) u Long distance calls 9 + 1 + Area Code + number + Acct or ID 9 + 011 + number + Acct or ID 9 + information + Acct or ID u You will receive a prompt (stutter tone) for account key or ID number. If you misdial the account key or user ID, you will hear error tone (dee do dee do), at which point you have the opportunity to enter the correct code. If you enter 3 incorrect codes, you will hear a busy signal and then be disconnected. u (“<<“ will erase last character)

5. Placing fax calls u For international calls: “9 + 011 + intl-number + # (pound key) + 2 pauses (pause button on the fax - which may be the redial key, consult your fax book) + account key” u Domestic long distance: “9 + 1 + area code + number + 2 pauses + account key” u Enter all of these digits before pressing the "start" button on the fax. This will allow time for the fax to dial the telephone number, indicate the "end of dialed number" via the "#" (important for variable length international numbers), then provide pauses to allow time for the account key stutter prompt, allow entry of the account key.

6. Transferring calls u Press “Trnsfer” (displayed in screen) u When you receive dial tone, enter the extension where you would like to transfer the call to u Announce call u Press “Trnsfer” u To return to caller if party is not available, press “End Call”, then press “Resume”

7. Consultation Call u Press “Hold” u Press “New Call” Dial Extension u Press “Hold” u To alternate between calls Use arrow keys to highlight caller, press “Resume”

8. Conference Call (up to 5 other people) u Dial 1st party u Press “More” (displayed in screen) u Press “Confrn” u Dial 2nd party u Press “Confrn”

9. Conference Call (up to 5 other people) u Dial 1st party u Press “More” (displayed in screen) u Press “Confrn” u Dial 2nd party u Press “Confrn” u Press “More” u Dial 3rd party u Press “Confrn” u Press “End Call”, use arrow to select the previously connected parties without adding last call

10. Call Pickup u Allows you to pick up a ringing phone u Press “More” (displayed in screen) until you can choose “PickUp” u Enter the ringing extension number

11. Forwarding Your Phone u To work at another desk u Or when you will be away from the office u Press “CFwdAll” Dial the extension ( or Voice Messaging access number) to forward your calls to Display reads “Forwarded to xxxx” u To remove forwarding from your line u Press “CFwdAll”

12. UCAR Directory u To look up UCAR Employees u Press “Directories” Select the UCAR Directory u Enter Last Name, First Name Enough letters to make a list of less than 32 names u Or extension u Press “Search” (“<<“ will erase last character) u Select person (using arrows) u Press “Dial”

13. Setting up Your Telephone Services u Logon to the web page http://phones.ucar.edu/ccmuser Logon name (same as UCAR email user ID, eg. jdoe) Password PIN - please change password and PIN at first loginhttp://phones.ucar.edu/ccmuser u Web interfaces uses “mouse-overs” to highlight links

15. Forwarding (web interface) u To Forward to Phonemail u Check “Forward All” box u Select “Phonemail” radio button u Update u To Forward all calls to another number u Check “Forward All” box u Select “this number” radio button u Enter “this number” (extension) u Update u To Remove all call forwarding u Uncheck “Forward All” box u Update

16. Speed Dial Buttons (web interface) u 4 Buttons available (depending upon phone configuration) u Add/Update your Speed Dials Enter telephone number Remember to add access digits Enter Text to display next to button u Update (this will reset your phone)

17. Configuring IP Phone Services u Select a Service (drop down menu) u Click continue u Add additional information (if required) u Press Subscribe The selected Service is now available from your phone u To Use the service u Press Services u Select service (arrows or number) u Follow prompts

18. Fast Dials & Address Book u 100 Fast dial entries u Select and configure“My Fast Dials” and “Personal Address Book” as services (see preceding screen) u Configure “Personal Address Book” “Add New Entry” Enter telephone number (Remember to add access digits, no spaces, only digits) Click Insert button u Click “Fast Dials” Select Unassigned Index Select previously defined Entry & number Click Insert button

19. Voice Messaging Lamp u We recommend using the system policy defaults

20. Locales u For your phone u For your web pages These select the language of the displays (web interface and phone)

21. Telephone Features u Placing calls u Transfers, Consultation, and Conference Calls u Call Pickup u Forwarding Your Phone u UCAR Directory u Custom Services

22. Questions u 7960 Phone tutorial available at http://www.cisco.com/warp/public/779/largeent/avvid/prod ucts/7960/router_page.htm http://www.cisco.com/warp/public/779/largeent/avvid/prod ucts/7960/router_page.htm

23. Voice Messaging Features u Accessing your Mailbox u Listening to Messages u Forwarding, Saving, and Deleting messages u Sending Messages u Setup Options u Message Notification

24. Accessing Messaging u Press Messages ( or dial access number) If you dialed the external phone number, press * when voice messaging answers, and enter your extension u Enter your password, # u Web Interface Internet Explorer ( version 4.0 or above) u http://voicemail.ucar.edu/web/aa User name Password http://voicemail.ucar.edu/web/aa

26. Listening to Messages u New Messages (1) u Old Messages (3) Restart Msg/Summary (1)Rewind (7) Save (2)Pause/Resume (8) Delete (3)Fast Forward (9) Reply (4) Skip to End (#) Forward Message (5) Voicemail brochure http://www.scd.ucar.edu/nets/ucar-directories http://www.scd.ucar.edu/nets/ucar-directories

27. Sending Messages (2) u Send now (#) u Message Options (1) Messages can be sent to an individual, multiple users, or a list u Special Delivery Options (3) Urgent (1)Private (3) Return Receipt (2)Future Delivery (4)

28. Setup Options (4) u Greetings & Transfer options (1) u Greetings (1) Regular Alternate (vacation) u Your Call Transfer Extension (2) u Message Settings (2) u Message Notification (1) u Full/Brief Menus (2) u Private Lists (4) u Personal Settings (3) u Phone Password (1) u Recorded Name (2)

29. Message Notification Setup Options (4) (1) u Schedules Pagers Working at Home u Remote Security Receiving notification at a telephone u Unity has a message for “jdoe” Enter ID now u Press 1 to turn OFF notification to this number (wrong number)

32. Voice Messaging Features u Accessing your Mailbox u Listening to Messages u Forwarding, Saving, and Deleting messages u Sending Messages u Setup Options u Message Notification

33. Questions u User information available at: http://www.scd.ucar.edu/nets/projects/voip/documentation/ users/voip-user-info.htm http://www.scd.ucar.edu/nets/projects/voip/documentation/ users/voip-user-info.htm u Email “phones@ucar.edu”phones@ucar.edu