Presentation is loading. Please wait.

Presentation is loading. Please wait.

University of Maryland Center for Environmental Science Chesapeake Biological Laboratory IP Phone Training.

Similar presentations


Presentation on theme: "University of Maryland Center for Environmental Science Chesapeake Biological Laboratory IP Phone Training."— Presentation transcript:

1 University of Maryland Center for Environmental Science Chesapeake Biological Laboratory IP Phone Training

2 Connectivity. Integration. Assurance.Slide 2 Agenda Introduction Get Acquainted with the Phone Personalize your phone settings Phone Features and Functionality System Directories Voice Mail Important Phone # Information Important Dialing Information Questions & Answer

3 Connectivity. Integration. Assurance.Slide 3 Get Acquainted with your IP Phone

4 Connectivity. Integration. Assurance.Slide 4 Cisco IP Telephones Cisco 7940 Two Line Phone Cisco 7910 Single Line Phone

5 Connectivity. Integration. Assurance.Slide 5 IP Phone Hard Buttons Function Buttons SpeakerphoneHeadset Mute Volume Alpha-numeric Pad Scroll Button

6 Connectivity. Integration. Assurance.Slide 6 IP Phone Soft Buttons Soft Key Function Buttons Line Buttons

7 Connectivity. Integration. Assurance.Slide 7 Detailed Button Review – Part 1 1 - Handset with indicator light - Functions like a traditional handset. The light strip at the top of the handset blinks when the phone rings and can be set to remain lit when you receive a voice mail message. 2 - LCD screen - Displays features such as the time, date, your phone number, caller ID, line/call status and soft key tabs. 3 - Cisco IP Phone model type - Indicates your Cisco IP Phone model. 4 - Line or speed dial button - Opens a new line, speed dials the number on the LCD screen, or ends a call. The Cisco IP Phone 7960 has six line or speed dial buttons and the 7940 has two

8 Connectivity. Integration. Assurance.Slide 8 Detailed Button Review – Part 2 5 - Foot stand adjustment - Allows you to adjust the angle of the phone base. 6 - Directories button - Provides access to call histories and directories. 7 - ? button - Displays help on your LCD screen for a phone button or function. 8 - Settings button - Provides access to phone settings such as contrast and ring sound, network configuration, and status information.

9 Connectivity. Integration. Assurance.Slide 9 Detailed Button Review – Part 3 9 - Speaker button - Toggles the speaker on or off. 10 - Mute button - Toggles the mute on or off. 11 - Headset button - Toggles the headset on or off. 12 - Volume button - Increases or decreases volume for the handset, headset, or speakerphone (depending upon which is currently active). Also controls the ringer volume (if the handset is in its cradle), and the LCD contrast.

10 Connectivity. Integration. Assurance.Slide 10 Detailed Button Review – Part 4 13 - Services button - Provides access to phone services (if available). 14 - Messages button - Provides access to a message system (if available). 15 - Navigation button - Enables you to scroll through text and select features displayed on the LCD screen. 16 - Dial pad - Works exactly like the dial pad on a traditional telephone.

11 Connectivity. Integration. Assurance.Slide 11 Message Waiting Indicators Message Waiting Indicator

12 Connectivity. Integration. Assurance.Slide 12 Phone Connectivity 1 - AC adapter port (DC48V) - Not required!! 2 - Power supply with AC adapter port plug - Not required!! 3 - Power cable with wall socket plug - Not required!! 4 - Network port (10/100 SW) - Plug cable into wall jack 5 - Access port (10/100 PC) - Plug cable into your PC 6 - Handset port – Plug handset into phone 7 - Headset port - If Applicable

13 Connectivity. Integration. Assurance.Slide 13 Using the Handset Handset  The handset on your Cisco IP Phone functions in the same way as a handset on a traditional phone.  To place and answer calls with the handset, simply lift the handset. To hang up, place the handset back in its cradle.

14 Connectivity. Integration. Assurance.Slide 14 Using the Speakerphone Speakerphone Button  To switch from the handset to the speakerphone, press the Speaker button on the front of your phone during a call, then hang up the handset.  To place and answer calls using the speakerphone, press the Speaker button. You can use the speakerphone in conjunction with all of the features on your Cisco IP Phone.  To switch from speakerphone to handset during a call, simply lift the handset.

15 Connectivity. Integration. Assurance.Slide 15 Using a Headset Speakerphone Button  Headsets do NOT come with the phone!  To place and answer calls using a headset, plug an approved headset into the back of the phone base and press the Headset button on the front of your phone. You can use the headset in conjunction with all of the features on your Cisco IP Phone, including the Volume and Mute buttons. Use these buttons to adjust the volume to the ear piece and to mute the speech path from the headset microphone.

16 Connectivity. Integration. Assurance.Slide 16 Personalize your IP Phone

17 Connectivity. Integration. Assurance.Slide 17 Adjusting the Speaker Volume  Step 1 - Place/Receive a call  Step 2 - While you are on a call, adjust the volume to your liking  Step 3 - While you are still on the call, press the SETTINGS button and then the SAVE button.  Step 4 - This will save your speaker volume setting even after you hang up. Volume Buttons

18 Connectivity. Integration. Assurance.Slide 18 Adjusting the Ringer Volume  Step 1 - press the up or down Volume button while the handset is in its cradle.  Continue to press the Volume button to hear sample rings and to adjust the volume to the desired level.  The ringer volume is automatically saved. Volume Buttons

19 Connectivity. Integration. Assurance.Slide 19 Changing your ringer  Step 1 - Press the Settings button.  Step 2 - From the Settings menu, use the Navigation button to select Ring Type.  Step 3 - Press the Select soft key.  Step 4 - To scroll through the list of ring types, use the Navigation button.  Press the Play soft key to hear the selected ring type.  Step 5 - When you find the ring you want, press the Select soft key to check the corresponding check box.  Step 6 - Press the OK soft key to accept and save your ringer selection.  Step 7 - Press the Save soft key to save all of your settings and to exit the Settings menu!!!

20 Connectivity. Integration. Assurance.Slide 20 Adjusting the contrast To improve the readability of the LCD, follow these steps to adjust the contrast:  Step 1 - Press the Settings button.  Step 2 - From the Settings menu, use the Navigation button to select Contrast.  Step 3 - Press the Up or Down soft keys (or the Volume buttons) to set the desired contrast level.  Step 4 - Press the OK soft key to accept and save your changes.

21 Connectivity. Integration. Assurance.Slide 21 Phone Features and Functionality

22 Connectivity. Integration. Assurance.Slide 22 Call Hold  Step 1 - Place/Receive a call  Step 2 - While you are on a call, press the hold soft key  Step 3 – The call indicator next to the line extension will show two arrows pointing towards each other  Step 4 - While you are on hold, press the Resume soft key  Step 3 – The call indicator next to the line extension will show a phone off the hook Hold Soft Key

23 Connectivity. Integration. Assurance.Slide 23 Call Transfer  Step 1 During a call, press the Transfer soft key. This puts the call on hold.  Step 2 Dial the number or office extension to which you want to transfer the call.  Step 3 When it rings on the other end, press Transfer again. Or, when the party answers, announce the call and then press Transfer.  Step 4 If you are using a handset, hang up.  If the party refuses the call, press the Resume soft key to return to the original call. Transfer Soft Key

24 Connectivity. Integration. Assurance.Slide 24 Call Conference  Step 1 - Call the first party in the conference call.  Step 2 - Press the more button and then Press the CONFRN software button.  Step 3 - Dial the number of your second party in the conference call.  Step 4 - When that party answers and agrees to participate in the call, press the CONFRN button again to connect all parties. If the second party is not available, press ENDCALL. You should be then prompted to RESUME the call with your first party.  Step 5 - If you have more than two additional parties, repeat steps 2-4 until everyone is in the conference.  Step 6 - The conference call initiator can drop the last party that he or she added by pressing the Most soft key. Conference Soft Key

25 Connectivity. Integration. Assurance.Slide 25 Call Park  Step 1 – Step 1 - Place/Receive a call  Step 2 - While you are on a call, press the more button and then press the Park soft key  Step 3 – The phone will display the extension where the call is parked (I.e.: 1111)  From any phone, dial “1111”  Call is retrieved from Park Park Soft Key

26 Connectivity. Integration. Assurance.Slide 26 Call Pick Up Allows you to pick up a an incoming call to another phone in your group  Step 1 - Confirm that a phone in your group/department is ringing  Step 2 - Press any available line button on your Cisco IP Phone.  Step 3 - Press the more button and then Press the PickUp soft key. The call now rings on your phone.  Step 4 - Answer the incoming call. Line Buttons

27 Connectivity. Integration. Assurance.Slide 27 Call Forward  Step 1 - Press the CFwdAll soft key. You should hear two beeps.  Step 2 - Enter the number to which you want to forward all of your calls.  Step 3 - Be sure to enter the number exactly as you would if you were placing a call to that number. For example, enter an access code such as 9 or the area code, if necessary.  Step 4 - After you enter the number, an animated phone icon with a flashing right arrow appears in the upper-right corner of the LCD screen. The LCD also displays a message confirming the number or extension to which your calls are being forwarded.  Step 5 - To cancel call forwarding, press the CFwdAll soft key. Call Forward Soft Key

28 Connectivity. Integration. Assurance.Slide 28 System Directories

29 Connectivity. Integration. Assurance.Slide 29 Call History Directory Missed Calls  Step 1 - Press the Directories button.  Step 2 - Scroll to the Missed Calls option and press SELECT. A history of missed calls will be displayed on the LCD.  Step 3 - If desired, press the DIAL button to place a call from the missed call directory.  Step 4 - If necessary (e.g., “9” to dial outside numbers), you may use the EDITDIAL button to add or delete a number. Received Calls  Step 1 - Press the Directories button.  Step 2 - Scroll to the Missed Calls option and press SELECT.  Repeat Steps 3 & 4 Placed Calls  Step 1 - Press the Directories button.  Step 2 - Scroll to the Missed Calls option and press SELECT.  Repeat Steps 3 & 4 Directories Button

30 Connectivity. Integration. Assurance.Slide 30 Corporate Name Directory Missed Calls  Step 1 - Press the Directories button.  Step 2 - Scroll to the Corporate Directory option and press SELECT. A search screen will be displayed on the LCD.  Step 3 - Use the scroll to select the first name, last name or number option  Step 4 - Use the numbers corresponding to the letters on the dialing pad to enter the name or number you are searching for in the directory.  A complete name is not required. Entering a "j" under first name and hitting the "Search" soft key will return all users with the first name starting with "j".  Step 5 - If desired, press the DIAL button to place a call from the corporate directory. Directories Button

31 Connectivity. Integration. Assurance.Slide 31 Voice Mail

32 Connectivity. Integration. Assurance.Slide 32 How Do You Know If You Have Voice Mail? Message Waiting Indicator  Red LED behind ear piece of handset  Envelope icon next to line extension  Light turns off and envelope disappears after all messages have been reviewed

33 Connectivity. Integration. Assurance.Slide 33 How Do I Set Up My Mailbox?  Press the Messages button (shown in picture)  Enter basic system password of "12345"  Follow the system prompts  Say your name  Enter a greeting  Enter a new password  You are automatically listed in the dial by name directory after set up Messages Button

34 Connectivity. Integration. Assurance.Slide 34 How Do I Check My Messages? Message Waiting Indicator From an Internal Phone  Confirm that the message waiting indicator is on  Dial the VM extension or press the messages button  Enter your new password  Retrieve your messages From an External Phone  Dial the full external VM phone number  Enter your new password  Retrieve your messages Messages Button

35 Connectivity. Integration. Assurance.Slide 35 Important Phone # Information

36 Connectivity. Integration. Assurance.Slide 36 Phone and Voice Mail Reference Guides


Download ppt "University of Maryland Center for Environmental Science Chesapeake Biological Laboratory IP Phone Training."

Similar presentations


Ads by Google