1. SIP GW Loopback Step By Step Programming Guide
Rev Aug., 2013

2. Overview 2

3. Overview SIP GW Loopback
This SIP GW Loopback is used for demonstration purpose if there is no actual Trunk.
The AK for IP Trunk is required.
DID table:
> 101
> 102
> 103
> 104
> 5801 (DISA)
Virtual CO
V-SIPGW Loopback
NS1000
MPR( )
DSP( )
Extension No.101
CLIP :
Extension No.102
CLIP :
Extension No.103
CLIP :
Extension No.104
CLIP :

4. Step by Step Programming4

5. Set up of SIP GW Loopback
1-a. Install V-SIPGW16
1-b. Change card status to “Ous”
1-c. Select “Port Property”
1-a
1-b
1-c

6. Set up of SIP GW Loopback
2. Set Channel Attribute, SIP Server IP Address and SIP Server Port Number
2-a. Select “Main”
2-b. Select “Basic channel” for Port1
2-c. Select “Additional channel for Slot 31 Ch1” for Port 2-8
2-a
2-b
2-c

7. Set up of SIP GW Loopback
2. Set Channel Attribute, SIP Server IP Address and SIP Server Port Number
2-d. Set “ ”(PBX IP Address) to SIP Server IP Address
2-e. Set “35060” to SIP Server Port Number
2-d
2-e

8. Set up of SIP GW Loopback
3. Set Account Information
3-a. Select “Account”
3-b. Set “12345” to User Name
3-c. Set “12345” to Authentication ID
3-d. Set “12345” to Authentication Password
3-a
3-b
3-c
3-d

9. Set up of SIP GW Loopback
4. Change Register Ability
4-a. Select “Register”
4-b. Change Register Ability to “Disable”
4-a
4-b

10. Set up of SIP GW Loopback
5. Change From Header
5-a. Select “Calling Party”
5-b. Change From Header - User Part to “PBX - CLIP”
5-c. Click “OK”
5-a
5-b
5-c

11. Set up of SIP GW Loopback
6-a. Change card status to “Ins”
6-a

12. Set up of DDI / DID Table and CLIP ID
1. Set DDI / DID Table
1-a. Select “DDI / DID Table”
1-b. Assign DDI / DID Number and Destination
Ex.) Number : , Destination : 101
1-c. Click “OK”
1-b
1-a
1-c

13. Set up of DDI / DID Table and CLIP ID
2. Set CLIP ID
2-a. Select “Extension Settings”
2-b. Select “CLIP”
2-c. Assign CLIP ID for each Extensions Ex.) for Extension 101
2-d. Click “OK”
2-b
2-c
2-a
2-d

14. END

15. Modification
SIP GW loopback for Demo SetUp_SBSGuide_6Aug2013 Odaguchi.pptx
Initial Draft 15