Presentation is loading. Please wait.

Presentation is loading. Please wait.

Unified-PCMC Ver4 (KX-NCP500/1000/TDE600). Installation.

Similar presentations


Presentation on theme: "Unified-PCMC Ver4 (KX-NCP500/1000/TDE600). Installation."— Presentation transcript:

1 Unified-PCMC Ver4 (KX-NCP500/1000/TDE600)

2 Installation

3 UPCMCv4.xxx Download the latest UPCMC from the PCC Website. Double-Click the icon and install the tool to your PC. NB: You will need ‘Administrator’ rights to successfully install the U-PCMC. “ U-PCMC (V4.x) Installation - 1

4 Select the ‘Repair’ option (Pre-selected) and click ‘Next’. “ U-PCMC (V4.x) Installation - 2 Click next to continue

5 If you are upgrading the U-PCMC, then you will have the option to backup your connection profile information, NB: For a ‘new’ installation, this option will not be presented. “ U-PCMC (V4.x) Installation - 3 Click next to continue

6 Then, accept the license agreement and Click ‘Next’. “ U-PCMC (V4.x) Installation - 4 Click next to continue

7 “ U-PCMC (V4.x) Installation - 5 We can see PBX models. Click next to continue

8 “ U-PCMC (V4.x) Installation - 6 User and Company name can be entered. Click next to continue

9 Be sure to select the correct country suffix code for your region. Then select the required PCMC screen language. “ U-PCMC (V4.x) Installation - 7 Click next to continue

10 “ U-PCMC (V4.x) Installation - 8 Select the destination folder for the installation. Click next to continue

11 “ U-PCMC (V4.x) Installation - 9 A summary of the provided details will be displayed for confirmation. If the details are correct, the installation can begin

12 After the installation has completed (it takes several minutes), the option to copy the USB drivers is presented. If necessary, copy the files to the following directory :- C:\WINDOWS\system32\drivers “ U-PCMC (V4.x) Installation - 10

13 Start U-PCMC

14 Be sure to check the contents of the ‘Information’ page. It contains details of required LPR s/w levels and conversion information. “ U-PCMC (V4.x) Start - 1 Once installed, click the UPCMC Shortcut to launch the application Click “OK” to continue

15 Then enter the password for the desired level (INSTALLER/USER etc) “ U-PCMC (V4.x) Start - 2 Click “OK” to continue

16 The same options as earlier U-PCMC are presented. “ U-PCMC (V4.x) Start - 3

17 “ U-PCMC (V4.x) Start - 4 New (Batch Mode) New Model - TDE600 - NCP500 - NCP100

18 “ U-PCMC (V4.x) Start - 5 TDE600 Slot Menu

19 “ U-PCMC (V4.x) Start - 6 NCP500 Slot Menu

20 “ U-PCMC (V4.x) Start - 7 NCP1000 Slot Menu

21 “ U-PCMC (V4.x) Start - 8 Slot view is changed to represent NCP Model (NCP1000).

22 “ U-PCMC (V4.x) Start - 9 The same operation as earlier U-PCMC are presented.

23 “ U-PCMC (V4.x) Start - 10 PBX Replacement. Sorry – PBX Replacement for NCP500/1000 is not possible.

24 Improvements/New Menus - Auto-Programming for Call-Pickup - IP-PT registration procedure - Portable Station registration procedure - Activate License - ‘Search’ Function to Extension List View. - Built-in Communication Assistant - Activation Key Detail Information - FAX Transfer function

25 “ Auto-Programming for Call-Pickup -1 ISDN Ext.1001 Ext Ext.1001 has a call (Internal/eternal) 2- Ext.1002 pricks up the call by * But, customer wish to have…… Customer Request Operation 1- Ext.1001 has a call (Internal/eternal) 2- Ext.1002 pricks up the call by *40 + xx. Alternative Plan 1- Quick Dial *0 → ***00 2- Ext.1002 personal speed dial 00 → *40 + xx. U-PCMC ver.4 automatic program.

26 “Call-Pickup tool” is added. After assigning extensions to their correct groups, this tool can be used to make easy call pickup for each user. “ Auto-Programming for Call-Pickup -2 Click “YES” to continue Available PBX -TDE600 -NCP500 -NCP1000

27 “ Auto-Programming for Call-Pickup -3 Ext.1003 Pick-up group-02 Finally……… Ext.1001 Pick-up group-01 personal speed dial 00 → *4002. personal speed dial 00 → *4001. Ext.1002 Pick-up group-01 personal speed dial 00 → *4001. Quick Dial *0 → ***00 Automatically programmed

28 -Open Registration Screen -Select IP Extension numbers -Click Next -Click Next Screen shows Registration Succeed! - Click Continue -Click Next Need to click Next/Continue for each IP-PT registration “ IP-PT registration procedure -1 -Connect IP-PT to LAN and wait for automatic registration (about 15 seconds) Screen shows Registration Succeed! - Click Continue Current

29 -Open Registration Screen -Select IP Extension numbers -Click Next -Connect IP-PT to LAN and wait for automatic registration (about 15 seconds) -Click Automatic response Screen shows Registration Succeed! for 5 seconds -Connect IP-PT to LAN and wait for automatic registration (about 15 seconds) Improved No operation required for each IP-PT registration “ IP-PT registration procedure -2 Screen shows Ready for next registration New Icon Available PBX -TDE600 -NCP500 -NCP1000

30 -Open Registration Screen -Select PS Extension numbers -Click Next -Connect PS to System and wait for automatic registration. -Click Automatic response Screen shows Registration Succeed! for 5 seconds Improved No operation required for each PS registration “ Portable Station (PS) registration procedure Screen shows Ready for next registration New Icon Available PBX -TDE600 -NCP500 -NCP1000 -Connect PS to System and wait for automatic registration.

31 CA License status can be viewed via the Activation Key Page. Automatic OUS/INS can be made after adding additional licenses. (Activate License) “ Activate License Available PBX -NCP500 -NCP1000

32 “ ‘Search’ Function to Extension List View. Available PBX -TDE600 -NCP500 -NCP1000 It is possible to search by Ext number or Type or name. It is easy to find Shelf, Slot, Prot.

33 “ ‘Sort’ Function to Extension List View. We can sort by Extension number, Type, Extension name, Shelf, Slot, and port. Available PBX -TDE600 -NCP500 -NCP1000 E.G Sort by Extension number.

34 4.1 - Option 9 (Extension Settings) – Built-in Communication Assistant It is possible to specify the type of CA License each extension can use. (Enable = Pro/Supervisor) NB: This tab also appears in the PS Settings Options, but is not supported till v2.x “ Built-in Communication Assistant Available PBX -NCP500 -NCP1000

35 “ Activation Key Detail Information -1 - Key Type ? - Temporally ? - Unlimited ? Customer Request want to see activation key details.

36 “ Activation Key Detail Information -2 Available PBX -NCP500 -NCP Highlight Activation key 2- Click “Detail” Activation key type No. of Activation Key Activation key No. Expiration Day

37 This function is same as TDA15/30 FAX Transfer Function “ FAX Transfer function DISA Message – FAX Transfer function is added Available PBX -NCP500 -NCP1000

38 “ RBT to outside caller via V-SIP “RBT to outside caller” added to SHELF Property. Available PBX -NCP500 -NCP1000

39 Modifications/Changes

40 SLT Ring Default setting is changed from ‘Disable’ to ‘Enable’ (Based on TDE100/200) 1 st Party CDR Interval Timer is not shown. (The System refers to 3 rd Party CTI.) 2.9 System Settings – Option 6(CTI) “ Modifications/Changes -1 Available PBX -TDE600 -NCP500 -NCP1000

41 V-IP Gateway DTMF Default setting Incoming Caller DTMF Default setting is “Outband (H.245)” – TDE Default setting is “Inband” “ Modifications/Changes -2 Available PBX -All TDE -NCP500 -NCP1000

42 Thank You Very Much For Your Attention “ We are Panasonic Family”


Download ppt "Unified-PCMC Ver4 (KX-NCP500/1000/TDE600). Installation."

Similar presentations


Ads by Google