Presentation is loading. Please wait.

Presentation is loading. Please wait.

KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information Rev 1.1E January 09, 2013 Specifications and schedule are subject to change without notice.

Similar presentations


Presentation on theme: "KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information Rev 1.1E January 09, 2013 Specifications and schedule are subject to change without notice."— Presentation transcript:

1 KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information Rev 1.1E January 09, 2013 Specifications and schedule are subject to change without notice. Panasonic System Networks PBX SE team NS1000 Version 2 Document for SE and Sales Training

2 2 When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE. (*) - KX-NT / KX-UT by Panasonic - NT based software phone by Panasonic - SIP hardware phone by other maker - SIP software phone for PC, Android, iPhone and so on 1. Introduction ModelSpecifications KX-NS8188XE1 adapter on SIP trunk KX-NS8290CEPRI30 adapter on SIP trunk KX-NS8290XPRI23 adapter on SIP trunk Trunk Adaptor SIP Trunk (30-ch) PRI30 SIP Extension Panasonic KX-NS8290 PRI30 PRI Card Other SIP Phone SIP Softphone KX-NT KX-UT IP Network KX-NS1000 KX-NCS mm (W) 44 mm (H) 200 mm (D) 500g

3 3 Before adding KX-NS1000 After adding KX-NS1000 Stacking Card Analog CO KX-TDE CO Card KX-DT w/ DSS Console SLT EXT Card MPR Card Analog CO KX-TDE CO Card Other SIP Phone SIP Softphone KX-NT KX-UT SLT EXT Card SC Card Direct Connection like TDE600 to TDE620 IP Network KX-DT w/ DSS Console KX-NS1000 On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX. This configuration is useful for new customer also when they need more SLT phone, Digital PT with DSS Console, Analog PT and analog CO as well as IP-Phone. KX-NCS0130 KX-NS0130SC card for NS100 KX-NS0131SC card for NCP KX-NS0132SC card for TDA/TDE 100 % Feature Transparency like TDE600 to TDE Introduction

4 4 3. Table of Contents ChapterExplanation 1Overview 2Specifications 3Concept of programming for Public mode 4Step by step programming for the trunk adapter 5Step by step programming for KX-NS1000 6Programming hint for Private mode (QSIG) 7Demonstration guide

5 5 Chapter 1 Overview

6 6 One PRI by card Two PRI by card and adapter Panasonic KX-NS8290 increases PRI capacity. KX-NS8188 for E1. Activation key of IP Trunk is NOT required in KX-NS1000 to connect PRI / E1 trunk adapter, even if SIP Trunk of KX-NS1000 is used. Trunk Adaptor SIP Trunk (30-ch) PRI30 SIP Extension Panasonic KX-NS8290 PRI30 PRI Card Other SIP Phone SIP Softphone KX-NT KX-UT IP Network KX-NS1000 PRI30 PRI Card Other SIP Phone SIP Softphone KX-NT KX-UT IP Network KX-NS Trunk Adapter for E1 / PRI KX-NCS0290 IP Trunk AK

7 7 Also useful to provide PRI/E1 with 2-ch Analog CO or 4 BRI. Trunk Adaptor SIP Trunk (30-ch) PRI30 E1 Analog CO Maximum 256 ch is available for E1 / PRI by adapter and IP trunk. Trunk Adaptor SIP Trunk (30-ch) Max. 256ch can be registered to SIP provider or the adapter. PRI30 PRI Card Trunk Adaptor SIP Trunk (30-ch) PRI30 E1 SIP Provider CO Card SIP Trunk (xx-ch) 12. Trunk Adapter for E1 / PRI - Capacity 256ch PRI30 E1 LineNS1000 x 1 NS1000 x 2 NS1000 x 3 NS1000 x 4 or more Trunk x 2600 Legacy x 2600 IP incl E1/PRI adapter256 SIP256 H x 2 = 96

8 8 More Analog CO by TDE (H.323) KX-TDE with CO card increases CO capacity using H.323. Activation key of IP Trunk is required in KX-NS1000 for H.323 all channels and required in KX-TDE for more than 4 or 16 channels. Activation key for “Enhanced QSIG” is not required because this configuration needs only basic QSIG function. Other SIP Phone SIP Softphone KX-NT KX-UT H.323 IP Network CO Card MPR Card w/ VoIP DSP 13. TDE as Option by H.323 IP Trunk AK Analog CO KX-TDE Reference Stacking card is not required in this case. SC Card Enhanced QSIG AK Enhanced Feature AK

9 9 Trunk Adaptor H SIP Trunk (256 ch) PRI30 Analog CO H.323 (96 ch) KX-NS1000 KX-TDE CO Card MPR Card w/ VoIP DSP HQ Branch IP Network KX-NCP H.323 (32 ch) 14. TDE as Option by H Capacity Max. 96ch can be used for any other PBX. (Chanel is occupied only when call is made. ) Reference Maximum 96 ch is available for Analog CO / BRI and H.323. LineNS1000 x 1 NS1000 x 2 NS1000 x 3 NS1000 x 4 or more Trunk x 2600 Legacy x 2600 IP incl E1/PRI adapter256 SIP256 H.323 incl Analog CO by TDE 4848 x 2 = 96 CO Card H.323 (32 ch)

10 10 More Analog CO and DPT / SLT by Stacking Card This configuration is useful if customer needs DPT with DSS Console and so on. - SC card for TDE-NCP is installed instead of MPR card. - SC card for NS1000 is installed to free slot. (Slot for “PRI+2SLT” etc ) Stacking Card increases DPT + SLT + Trunk capacity. CO Card Other SIP Phone SIP Softphone KX-NT KX-UT KX-DT SLT EXT Card SC Card Direct Connection like TDE600 to TDE620 IP Network 15. Stacking Card KX-NS1000 Analog CO KX-TDE 100 % Feature Transparency like TDE600 to TDE620 Stacking Card

11 11 Specifications You can connect a maximum of 2 existing PBXs for one KX-NS1000. A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for the entire One-look Network. An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series, or KX-TDA100/200/600/620 PBX Stacking Card - Specifications IP Network KX-DT KX-TDE600 KX-TDE620 KX-NCP KX-DT IP Network KX-DT KX-TDE600 KX-TDE620 KX-NCP KX-DT SC Card QSIG Max. 8 PBXs Different PBX category cannot be mixed to one KX-NS1000. Category 1 : KX-NCP Category 2 : KX-TDE(A) Category 3 : KX-TDE(A) Stacking card for KX-TDA100D is not planned currently. NCP500+TDE200 : N/A TDE100+TDA200 : OK TDE600+TDE620 : OK TDE620+TDE620 : OK Stacking Card

12 12 Conditions - Cards in right table are not supported. Reason is as follows. - MPR is not required. - IP feature is supported by KX-NS DISA/SVM feature is supported by KX-NS1000 without AK. - New cards for TDE-NCP version 5 are N/A. - By above condition, KX-NT400 and KX-HGT100 cannot be used after connecting with KX-NS IP capacity AK is not required for trunk and extension in existing PBXs because these are not IP. - Other AK such as CA is required in KX-NS1000 for extension in existing PBX. - In case of TDA100/200 and TDE100/200 OPB3 card with ECHO16 must be installed in only Slot 1. *) Other cards except OPB3 or OPB3 card with other daughter board except ECHO16 can be installed to any slot Stacking Card - Conditions Not Supported SymbolModel RMTTDA0196 MECTDA0105/ TDE0105 DSP4NCP1104 DSP16TDE0110 DSP64TDE0111 CTI-LINKTDA0410 IP-EXT16TDA0470 IP-GW4ETDA0484 IP-GW16TDA0490 IP GW4TDA0480 MSG4TDA0191 ESVM2TDA0192 ESVM4TDA0194 CLCOT8TDA1180 CLCOT8ETDA1186 MCSLC24TDA1178 MCSLC16TDA1176 Stacking Card

13 13 Programming It is not required to program for connection (Same as TDE600 to TDE620 connection). Property of cards in TDE/NCP can be programmed using NS1000 Web. 17. Stacking Card - Programming Stacking Card

14 Recommendation of Configuration KX-NS1000 is recommended as follows, when new customer does not have Panasonic PBX now and they want to use IP phone mainly for extension. When customer wants to use Recommendation for Extensionfor Trunk One PRI or 4 BRIOptional Card E1 / 2 or more PRI E1 / PRI + 4 BRI Trunk Adapter (+ Optional Card) IP Phone + 2 SLTE1 / PRI + 2 Analog 3 or more Analog CO TDE/NCP as option by H or more BRI Other mixture IP Phone + Digital PT + Analog PT + SLT (Any above configuration) TDE620 with Stacking Card Version 2 Version 1 & 2 Version 2

15 KX-NS1000 Capacity Total capacity is as follows. LineNS1000 x 1 NS1000 x 2 NS1000 x 3 NS1000 x 4 or more Trunk x 2600 Legacy by stacking card or/and “xxx+SLT2” card x 2600 IP incl E1/PRI adapter256 SIP256 H x 2 = 96 Extension Digital PT / Analog PT / SLT by stacking card or/and “xxx+SLT2” card 480 SLT (*1) 512 DPT (*2) 1000 IP UT NT (NS1000 V1) x 2128 x x N or 1000 NT (NS1000 V2) x 2256 x (*1) 24SLT x 10 by TDE620 x 2 for example (*2) 256 DPT incl DXDP by TDE620 x 2 for example

16 16 Chapter 2 Specifications

17 17 Hardware Appearance is as follows. 21. Hardware Appearance No.Description 1System LED 2E1 / PRI line LED 3DC Jack 4LAN Port 5LAN LED (Link) 6LAN LED (Transmission Speed) 7E1 / PRI line port 8Initialize button (Not slide switch) Front Back Wall Mountain Unpack the box and check the items below: Main Unit x 1 Screw x 2 Washer x 2

18 18 KX-NS8188 / KX-NS8290 supports PoE. If PoE is not supported by network, AC adapter is required. KX-A420 for Brazil KX-A239 for others *) These are same model of AC adapter for KX-UT phone. 22. PoE (Power over Ethernet)

19 19 KX-NS8188 E1 adapter supports following features. 23. KX-NS8188 E1 Adapter FeaturesNS8188TDA0188 (Reference) SignalingDR2Yes E&M-CNoYes E&M-PNoYes Dial TypeMFC-R2Yes DTMFYes PulseNoYes Caller Number Notification (ANI)Yes Charge / Meter PulseNoYes Deny collect call for BrazilYes Outgoing call auto disconnectYes KX-TDE KX-TDA0188 Trunk Adaptor KX-NS8188 E1 KX-NS1000

20 20 KX-NS8290 PRI adapter supports following features. 24. KX-NS8290 PRI Adapter FeaturesNS8290NS0290 (Reference) Mode CO (Public)Yes ExtensionNoYes QSIG-master/slave (Private)Yes ISDN Carrier Service (Public) CLIP / CLIRYes COLP / COLRNoYes CNIP /CNIRYes CONP / CONRNoYes Advice of chargeYes Call ForwardingNoYes Call HoldNoYes Call Transfer (incl. ISDN Centrex) NoYes Tree-party conferenceNoYes Malicious call identificationNoYes Generic keypad protocolNoYes CCBSNoYes ISDN - Virtual Private NetworkNoYes E-911 (for PRI23)Yes Trunk Adaptor KX-NS8290 KX-NS0290 PRI Card ISDN “No” because these services by ISDN provider are not popular and PBX can support same feature basically. Conf by PBX Conf by ISDN KX-NS1000

21 KX-NS8290 PRI Adapter for QSIG Trunk Adaptor PRI QSIG H.323 QSIG Private Network (Leased ISDN) 30ch or 23ch NS1000 or other PBX PRI QSIG H.323 is used for this configuration instead of SIP. KX-NS8290 PRI adapter supports QSIG also. FeaturesNS8290TDA0290 (Reference) QSIG service CLIP/CLIRYes CNIP/CNIRYes Call Forwarding (CF)Yes Call Transfer (CT)Yes Completion of Calls to Busy Subscriber (CCBS) Yes Network Direct Station Selection (NDSS) Yes Centralized Voice MailYes Network ICD GroupYes KX-NS1000 LineNS1000 x 1 NS1000 x 2 NS1000 x 3 NS1000 x 4 or more IP incl E1/PRI adapter256 SIP + PRI Adapter for Public 256 H PRI Adapter for QSIG 4848 x 2 = 96 IP Trunk AK

22 22 Fractional service is also available. 26. Fractional Service 20ch Trunk Adaptor KX-NS1000 1st KX-NS1000 in Fukuoka 20ch 20ch E1/PRI Trunk Adaptor 30ch Trunk Adaptor 10ch Trunk Adaptor Total 256ch 2nd KX-NS1000 in Tokyo 16th KX-NS1000 in Niseko 30ch Trunk Adaptor 60ch E1/PRI 10ch E1/PRI 20ch E1/PRI

23 23 Back-up is available automatically for SIP trunk incl E1 / PRI adapter, KX-NT/UT IP-phone and one look connection. SIP Trunk PRI/E1 or SIP Provider Trunk Adaptor KX-NS1000 (1st) Master KX-NS1000 (2nd) Back-up Master KX-NT KX-UT Trunk Adaptor KX-NS1000 Master KX-NS1000 Back-up Master KX-NT KX-UT After master PBX stops working, SIP Trunk One-Look AK Back-up master PBX works as slave PBX usually. But it works as master PBX after master PBX stops working. KX-NT KX-UT KX-NT KX-UT One-Look AK PRI/E1 or SIP Provider 27. Solution with “Back-up Master”

24 24 Chapter 3 Concept of Programming for Public Connection

25 Concept of Programming - Adapter The trunk adapter is PBX with E1 / PRI trunk and SIP extension. SIP trunk of KX-NS1000 is registered to SIP extension of the adapter. Software of the adapter is basically same as KX-NS1000. Features except E1 / PRI and SIP extension are removed. Therefore programming method is very similar to KX-NS1000. Trunk Adaptor E1 / PRI SIP Extension PRI KX-NS ch or 23ch KX-NS PRI configuration is same as programming for KX-NS1000 PRI card (KX-NS0290). E1 configuration is same as KX-TDE E1 card (KX-TDA0188). - SIP extension configuration is same as KX-NS1000. But SIP extension is programmed by default. 401 to 430 for E1 / PRI to 423 for PRI23 PRI Card ID SIP Trunk KX-TDE KX-TDA0188 E1/ ISDN

26 Concept of Programming – NS1000 The trunk adapter is basically SIP provider for KX-NS1000. Following has to be programmed. - IP address of the adapter as SIP server destination - SIP registration User ID (Password is not required.) - Connection Attribute : SIP Provider / Trunk Adapter Trunk Adaptor SIP Extension KX-NS ch or 23ch E1/ ISDN E1 / PRI ID SIP Trunk

27 Concept of Programming - Call Programming of the trunk adapter is not required for DDI / DIL incoming call from E1/PRI to SIP extension. It works like DIL 1:1 without programming and DDI number and caller ID are informed from the trunk adapter to KX-NS1000. Programming of KX-NS1000 is required for DDI / DIL. Outgoing call is also programmed for KX-NS1000 instead of the trunk adapter. Therefore administrator has to access only KX-NS1000 to change extension number, DDI and so on after dealer installed. SIP Extension KX-NS1000 E1 / ISDN SIP Trunk CH1 CH2 CH30 Trunk Adapter E1 / PRI DDI Caller ID

28 28 Chapter 4 Step by Step Programming for Trunk Adapter Trunk Adaptor KX-NS1000

29 29 Operation and “SYSTEM” LED display is as follows. 1. Power On (Connect AC adapter or connect LAN with PoE) (a) Amber On (5 sec) (b) Amber rapid flash (5 sec) 2. During (b), keep pressing Initialize button for 1s. (c) Off (2 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash - Display of (b) finishes before 5 sec after operation of (2). - Display of (f) means success of initialization and awaiting “Easy set-up” of web maintenance console. 41. Initialize Initialize Button System LED Trunk Adaptor KX-NS1000

30 30 LED indication is as follows. 42. LED Indication Trunk Adaptor KX-NS1000

31 31 (1) Set IP address for example to your PC like first connection of KX-TDE or KX-NCP. - Trunk adapter does not have maintenance port with DHCP server. - Sub-net mask should be (2) Connect by Firefox. - Default IP address of trunk adapter is PC Connection by default for example Trunk Adapter KX-NS by default DHCP Server For demo, NS1000 with DHCP server function is useful to assign IP address of PC automatically. Trunk Adaptor KX-NS1000

32 32 (1) In 10 seconds from step in previous page, log-in menu is displayed. (2) Input “INSTALLER” as user and “1234” as password. 43. PC Connection - 2 Trunk Adaptor KX-NS1000

33 Easy setup - Language selection (1) Select language. Trunk Adaptor KX-NS1000

34 Easy setup - 1 (1) Select Suffix of KX-NS1000 and area. If Suffix is changed, system restarts again after click [OK]. Wait 3 min and connect PC again. No need to change (a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash Trunk Adaptor KX-NS1000

35 Easy setup - 2 No need to change. - Adapter name is only for reference. - Time is used only for error log. Trunk Adaptor KX-NS1000

36 Easy setup - 3 (1) Input IP address of trunk adapter in actual customer’s network. Get the IP address from IT manager. *) For demo, default is OK. Trunk Adaptor KX-NS1000

37 Easy setup - 4 No need to change. - Time is used only for error log. Trunk Adaptor KX-NS1000

38 Easy setup - 5 (1) Input password as you hope, click [Finish]. (2) Wait for 30 seconds. If LAN setting is changed, system restarts again after click [OK]. Wait 3 min and connect PC again. (a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash Trunk Adaptor KX-NS1000

39 Maintenance Console - Top menu If LAN setting is changed, (1) Remove the trunk adapter from LAN (2) Connect it to actual customer’s network. (3) Connect PC to IP address of trunk adapter using Firefox. (4) After log-in, following top menu is displayed. If LAN setting is not changed, following Top menu is displayed. Trunk Adaptor KX-NS1000

40 Maintenance Console - 1 Software version can be confirmed as follows. Trunk Adaptor KX-NS1000

41 Maintenance Console - 2 Parameter for PRI can be modified as follows. (Same as “PRI + 2 SLT” card) Trunk Adaptor KX-NS1000

42 Maintenance Console - 3 IP address of adapter can be changed. (No need to change usually.) Trunk Adaptor KX-NS1000

43 Maintenance Console - 4 Software can be updated by one step. (Not same as KX-NS1000) - Wait 15 minutes after clicking [Execute]. (Same as KX-NS1000.) Trunk Adaptor KX-NS1000

44 Maintenance Console - 5 E1/ PRI Card diagnosis is supported. Out of service can be assigned. This is required for software update also. Trunk Adaptor KX-NS1000

45 45 Chapter 5 Step by Step Programming for KX-NS1000

46 KX-NS Out of Service Install virtual SIP trunk card. Out of service is required for port or card before programming in following pages. Trunk Adaptor KX-NS1000 Trunk Adaptor

47 KX-NS Connection Attribute Change connection attribute from “SIP provider” to “Trunk Adapter” for each channels or click [Trunk Adapter] button to change max. 30 ch at the same time. Trunk Adaptor KX-NS1000 Trunk Adaptor Use this. No need to program each ch.

48 48 Max. 16 Adapter *) If program manually not using “trunk adapter”, more than 16 adapter can be programmed. 53. KX-NS Trunk Adapter button - 1 Input IP address of trunk adapter and click [Next]. - Trunk adapter name is for reference. Web maintenance console for the trunk adapter is opened. For reference Trunk Adaptor KX-NS1000 Trunk Adaptor

49 49 Select range to connect the trunk adapter instead of SIP provider. Select IP address and click [Finish]. If fractional service is used, set “20” for example. Otherwise NS1000 tries making call using 21ch to 30ch of PRI. Trunk Adaptor KX-NS1000 Trunk Adaptor SIP Provider KX-NS Trunk Adapter button - 2

50 KX-NS Registration to SIP Server Connection attribute were programmed by previous step. Parameters for registration to SIP server (E1/PRI adapter) were also programmed. Trunk Adaptor KX-NS1000 Trunk Adaptor

51 KX-NS CLIP “PBX CLIP” has to be selected as follows to send CLIP on extension for outgoing call. Trunk Adaptor KX-NS1000 Trunk Adaptor

52 KX-NS In Service Set In Service. - Other programming such as ARS, TRS is basically same as PRI for KX-TDE/NCP. - However it is required to program as next 2 pages additionally because I/F with trunk adapter is SIP. When E1/PRI line of trunk adapter is fault, trunk adapter stops communication with KX-NS1000. Therefore the SIP trunk ch of KX-NS1000 becomes fault. This specification is useful not to use the SIP ch automatically for ARS and so on. Trunk Adaptor E1 / ISDN KX-NS1000

53 KX-NS Dialing Plan Dialing plan has to be programmed for outgoing call because I/F with trunk adapter is SIP en-block dial. Otherwise extension caller has to wait for 10 seconds to hear ring back tone after dial to E1/PRI trunk adapter. Trunk Adaptor KX-NS1000 Trunk Adaptor

54 KX-NS DDI Modification DDI first 3 digits has to be removed because I/F with trunk adapter is SIP. ID such as “401” + real DDI number is informed as DDI number from E1/PRI adapter to KX-NS1000. Trunk Adaptor E1 / ISDN KX-NS1000 DDI 5678 DDI DDI 5678 Program DDI table.

55 55 Chapter 6 Programming Hint for Private Mode (QSIG)

56 56 Trunk Adaptor 61. Easy Setup for Adapter “Private” has to be selected by easy setup mode. KX-NS1000 Ext 1xx Ext 2xx ISDN QSIG H.323

57 57 Trunk Adaptor 62. PRI QSIG mode for Adapter QSIG (Slave) is assigned automatically after easy setup. KX-NS1000 Ext 1xx Ext 2xx ISDN QSIG H.323

58 Trunk Adaptor 63. H.323 programming for Adapter H.323 destination programming of adapter is also required. Common IP address is assigned for any dial. (Not each dial) KX-NS1000 Ext 1xx Ext 2xx ISDN QSIG H.323 IP address of Back-up master PBX

59 59 Trunk Adaptor 64. H.323 programming for KX-NS1000 H.323 destination programming of KX-NS1000 is required for adapter as well as other PBXs. Sole difference is that activation key for IP trunk is not required. IP Network KX-NS1000 Ext 1xx Ext 2xx Ext 3xx Ext 4xx ISDN QSIG DN2IP table (Dial to IP) Dial 2xx to Dial 3xx to Dial 4xx to H.323

60 60 Chapter 7 Demonstration Guide

61 Configuration Example PRI Adaptor SIP Trunk (30-ch) Ext 101 CLIP KX-NS1000 Ext 102 CLIP PRI Ext 201 CLIP KX-NCP with PRI KX-TDE with 2 PRI Extension as ISDN provider PRIPRI PRIPRI Ext 301 Ext 31X Ext 32X (for test) DLCDLC

62 62 Dial 321 (Remove by ARS) 72. Outgoing Call PRI Adaptor SIP Trunk (30-ch) Ext 101 CLIP KX-NS1000 Ext 102 CLIP PRI Ext 201 CLIP KX-NCP with PRI KX-TDE with 2 PRI Extension as ISDN provider PRIPRI PRIPRI Ext 301 Ext 31X Ext 32X (for test) DLCDLC DDI Dial 321 Dial 0/ Dialing plan 3XX DDI Program

63 63 Dial 312 (Remove by ARS) 73. Incoming Call PRI Adaptor SIP Trunk (30-ch) Ext 101 CLIP KX-NS1000 Ext 102 CLIP PRI Ext 201 CLIP KX-NCP with PRI KX-TDE with 2 PRI Extension as ISDN provider PRIPRI PRIPRI Ext 301 Ext 31X Ext 32X (for test) DLCDLC DDI 312 DDI Dial 0/ DDI Program

64 64 Ext 301 Ext 31X Ext 32X (for test) 74. PRI Extension PRI Adaptor PRI PRIPRI PRIPRI DLCDLC Standard LAN cable can be used by this switch for PRI Extension.

65 KX-NS1000 – SIP Register Resending “Register Resending Interval” has to be 10 seconds. If default value 300 seconds is used, it takes for 0 to 300 seconds to reconnect KX-NS1000 and trunk adapter, when trunk adapter returns IN Service from Out of Service or LAN is reconnected. Trunk Adaptor KX-NS1000 Trunk Adaptor

66 66 Thank you ! The END


Download ppt "KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information Rev 1.1E January 09, 2013 Specifications and schedule are subject to change without notice."

Similar presentations


Ads by Google