GS2065/TL265GS Product Technical Training (International version) 2-Way Wireless Security Suite

GS2065/TL265GS – Product Overview 2-Way Wireless Security Suite

2-Way Wireless Security Suite GS2065 GS2065 GSM/GPRS Wireless Alarm Communicator Overview: The GS2065 provides primary or backup GSM/GPRS communication for the Alexor 2-way wireless security suite Specifications: Dimensions : 3.937"x5.875"x0.625" (100mmx150mmx15mm) Weight : 68 g Antenna Gain : 2db Input Voltage : 11.1 to 12.6 V (from the PC-Link header) Current Draw : 65 mA at 12V (400 mA during the GSM transmission) Operating Environment : 5 º C to 40º C (40º F to 104º F) READ SCREEN PASS MODULE AROUND 2-Way Wireless Security Suite

2-Way Wireless Security Suite GS2065 GS2065 GSM/GPRS Wireless Alarm Communicator Features: Back up and primary GSM/GPRS alarm communication Panel remote uploading/downloading support via GSM/GPRS Advanced remote and local programming via DLS IV Keypad programming through WT5500 wireless keypad Individual Periodic Test Transmission via GSM/GPRS Supervision heartbeats via GSM/GPRS 128-bit AES encryption over GSM/GPRS Full event reporting Installer code SIA format PC-Link connection Signal strength and trouble display Optional Network Lock and SIM Lock PC9155 replacement front plate (8 LEDs) included Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite GS2065 GS2065 GSM/GPRS Wireless Alarm Communicator Compatible Control Panel: PC9155 Alexor Wireless Panel version 1.0 and higher Compatible Receivers: Sur-Gard System I Receiver: version 1.10 and higher Sur-Gard System II Receiver: version 2.00 and higher Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver) Product Model and Accessories: GS2065GS: For international market GS-15ANTQ: Antenna Extension Kits with 15 feet cable GS-25ANTQ: Antenna Extension Kits with 25 feet cable GS-50ANTQ: Antenna Extension Kits with 50 feet cable PCLINK-5WP: PCLINK Kits for the programming with DLS IV Add model number, panel and cabinet for hybrid Add Antenna kits and PCLINK-5WP for INT READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite TL265GS TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator Overview: The TL265GS is an Internet and GSM/GPRS Dual-Path alarm communicator for the Alexor 2-way wireless security suite Specifications: Dimensions : 3.937"x5.875"x0.625" (100mmx150mmx18mm) Weight : 78 g Antenna Gain : 2db Input Voltage : 11.1 to 12.6 V (from the PC-Link header) Current Draw : 100 mA at 12V (400 mA during the GSM transmission) Operating Environment : 5 º C to 40º C (40º F to 104º F) READ SCREEN PASS MODULE AROUND 2-Way Wireless Security Suite

2-Way Wireless Security Suite TL265GS TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator Features: Fully redundant Internet and GSM/GPRS dual-path alarm communication Integrated call routing Panel remote uploading/downloading support via GSM/GPRS and Internet Advanced remote and local programming via DLS IV Keypad programming through WT5500 wireless keypad Individual Periodic Test Transmission via GSM/GPRS and Internet Supervision heartbeats via GSM/GPRS and Internet 128-bit AES encryption via GSM/GPRS and Internet Full event reporting Installer code SIA format PC-Link connection Signal strength and trouble display Optional Network Lock and SIM Lock PC9155 replacement front plate (8 LEDs) included Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz READ SCREEN PASS MODULE AROUND 2-Way Wireless Security Suite

2-Way Wireless Security Suite TL265GS TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator Compatible Control Panel: PC9155 Alexor Wireless Panel version 1.0 and higher Compatible Receivers: Sur-Gard System I Receiver: version 1.10 and higher Sur-Gard System II Receiver: version 2.00 and higher Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver) Product Model and Accessories: TL265GS: For International market GS-15ANTQ: Antenna Extension Kits with 15 feet cable GS-25ANTQ: Antenna Extension Kits with 25 feet cable GS-50ANTQ: Antenna Extension Kits with 50 feet cable PCLINK-5WP: PCLINK Kits for the programming with DLS IV READ SCREEN PASS MODULE AROUND 2-Way Wireless Security Suite

2-Way Wireless Security Suite Global Approvals GS2065 GSM/GPRS Wireless Alarm Communicator TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator Now FCC/IC, UL, ULC (North America) CE, WEEE (Europe) A-Tick (Australia/New Zealand) September 2009 ANATEL (Brazil) CNC (Argentina) ICASA (South Africa) November 2009 IMQ (Italy) 2-Way Wireless Security Suite

GS2065/TL265GS – Installation and programming 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation BEFORE YOU BEGIN Have the following ready before installation: DSC DLS IV Programming Software Control panel backup battery Battery connection harness Batteries for WT5500 2-way wireless keypad Screwdriver PCLINK-5WP Kits PCLINK Header (Female) RJ11 cable Serial Header (DB9) Transformer (w/ connector to PCLINK header) 4 power plugs (international plugs) READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation Summary of Installation Steps Step 1 – Connect the PCLINK-5WP cable between the computer and GS2065/TL265GS Step 2 – Program the GS2065/TL265GS using DLS IV Step 3 – Insert the SIM card in the GS2065/TL265GS Step 4 – Connect the GS2065/TL265GS to the PC9155 Step 5 – Test for best signal strength location Step 6 – Program Communication Sections on the PC9155 via keypad Step 7 – Test communication NOTE: All the options of the communicator also could be programmed through WT5500 2-way wireless keypad. Please see details in product manual. Check steps READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.2 – Create an account Select ‘New Account’ Enter the account details Account Name Panel Type (Communicator Module) Connection Type (TL Network) READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.3 – Module IP Address Enter the IP address for the module READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.4 – Enter SMS Details Change ‘Connection Type’ to ‘SMS’ Enter a ‘User Name’ Enter a ‘Password’ Select ‘Create’ READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.5 – Program the GS/IP options The account will open Select the ‘GS/IP’ tab Enter the required information in the ‘GS/IP Options’ screen READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.6 – Program the Receivers options Enter the required information in the ‘Receivers’ screen READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.7 – Program the GPRS options Enter the required information in the ‘GPRS’ screen READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Step 2.8 – Load the programming to the communicator Use “Global Download” and choose “PC-LINK” as the connection type. Then click “OK” READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation Step 4 – Install and wire the communicator to the control panel (on-site) GS2065/TL265GS: See details in product manual for PC9155 control panel For PC9155D or PC9155G Kit, GS2065/TL265GS is pre-installed with the control panel Red Wire READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation Step 5 - Test for best signal strength location Ensure the SIM card is inserted Power up the control panel Check Green LEDs. You must achieve full or medium signal strength. See details in product manual. If signal strength is poor, must relocate the control panel or use an external extension antenna kits READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation Step 6 – Program communication options on the control panel via keypad GS2065/TL265GS with PC9155 control panel o Sections [301], [302], [303], [305] : Program Communication Path • DCAA - Internal (Ethernet 1, Ethernet 2, GPRS 1, GPRS 2) • DCBB - Ethernet Receiver 1 • DCCC - Ethernet Receiver 2 (backup) • DCDD - GPRS Receiver 1 • DCEE - GPRS Receiver 2 (backup) o Section [350] : Program Communication Format (Communicator) • (If Option [301] (above) is set to DCAA, Option [350] must be set to SIA, sub-option 5) o Sections [351] to [376] : Program Call Direction o Section [382] : Enable T-LINK Interface (Option [5]) o Section [383] : Program Back-up or Independent Communication o Section [167] : Enable Communication Wait For ACK (Set to 60 seconds) o Section [401] : Enable DLS Session Through GPRS or Ethernet (Option [1]) READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation GS2065/TL265GS Installation Step 7 – Test communication 1. Disconnect incoming phone line from TIP and RING on the control panel 2. Verify that LED 2 is on, this indicate that the unit is active 3. Create an alarm transmission 4. Verify alarm transmission by calling monitoring station 5. Re-connect the phone line, if necessary For back-up communication applications, perform steps 1 to 5 For primary communication applications, perform steps 3 and 4 only READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Programming GS2065/TL265GS Remote Programming We need several slides here to show how remotely get the DSL connection to re-program the communicator Via Ethernet/Internet connection Vis SMS initiated connection READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation LED Display Trouble Status LED (Yellow) Please see details about the trouble shooting on page 17 in product manual 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation LED Display Network Connection Status LED (Red) LED OFF No network connection issue present LED ON Physical Ethernet cable is not connected DHCP configuration fails Fails to get an IP address from the GPRS network GPRS connections has been reset LED blinks quickly once Ethernet transmitting LDE blinks quickly twice Ethernet receiving 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation LED Display Signal Strength LED 2 (Green) Signal Strength LED 1 (Green) Green LED 2 blinks quickly once GPRS transmitting Green LED 2 blinks quickly twice GPRS receiving 2-Way Wireless Security Suite

2-Way Wireless Security Suite Installation Keypad Trouble Display Trouble Condition Alternate Communicator Trouble Description SIM Card Lock GSM Trouble Ethernet Trouble Central Station Receiver Trouble Supervision Trouble SMS Config Trouble 2-Way Wireless Security Suite

GS2065/TL265GS – Applications 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Communicator Controlled Call Routing – Backup (dual-path) – Redundant (dual-path) Required Programming Panel Sections [301], [302],[303] and [305] • Any of them could be programmed as DCAA DCAA (default): Ethernet 1 → Ethernet 2 → GRPS 1 → GPRS 2 Communicator Sections [005] Option [004] - Primary and backup path [ON]: GPRS path primary, Ethernet path backup [OFF]: Ethernet path primary, GPRS path backup Option [005] - Redundant between GPRS path and Ethernet path [OFF]: Disable redundancy [ON]: Enable redundancy READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Backup Mode 1: Ethernet Primary, 4 Receivers READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Backup Mode 2: Ethernet Primary, 2 Receivers READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Backup Mode 3: GPRS Primary, 4 Receivers READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Backup Mode 4: GPRS Primary, 2 Receivers READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (Internal) Redundant Mode: 4 Receivers – (Redundancy between GSM/GPRS path and Ethernet/Internet path) READ SCREEN NOTE: The application requires 4 different SG receivers or SG-DLR3 IP line cards 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (External) PC9155 Panel Controlled Call Routing Backup (triple-path) • Panel section [383] – Options [2],[3] and [4] enabled • Panel section [380], Option [6] disabled Redundant (triple-path) • Panel sections [351] – [376] Options enabled Alternate (triple-path) • Panel section [380] – Option [6] enabled Required Programming Panel Sections [301], [302],[303] and [305] • Phone #: Phone number of the receiver • DCBB: Ethernet Receiver 1 • DCCC: Ethernet Receiver 2 • DCDD: GPRS Receiver 1 • DCEE: GPRS Receiver 2 READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (External) PC9155 Panel Controlled Call Routing –Backup: Panel Section [383] – Options [2],[3] and [4] enabled READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (External) PC9155 Panel Controlled Call Routing – Redundant: Panel Sections [351] – [376] Options enabled READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications GS2065/TL265GS Call Routing (External) PC9155 Panel Controlled Call Routing –Alternate: Panel section [380] – Option [6] enabled READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications Other Applications Keypad Programming All options of the communicator could be programmed from WT5500 keypad Control Panel option [851], Communicator option [999]-55 NOTE: A module reset is required if any options have been changed by the keypad. Periodic Test transmission Individual periodic test transmission via GPRS and Ethernet Customized Time of Day for test transmission Daily, Weekly and Monthly Interval Communicator Options [026], [028], [029], [124], [125], [224] and [225] NOTE: Enabling this feature will require more data usage. Encryption 128 Bit AES Encryption Turned on by central monitoring station Sur-Gard receiver Encrypted communications enabled after next event sent to the receiver READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications Other Applications Supervision Type Commercial Type and Residential Type Commercial Type can Swap Detection and require more data usage than Residential Type Communicator option [005]-[3] Heartbeats Interval Should be 65 seconds less than the supervision window programmed at the receiver. Send heartbeats to Ethernet 1 and/or GRPS 1 receiver Communicator option [004] and [005]-[1]&[2] NOTE: Enabling this feature will require more data usage. READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications Other Applications Installer Code Required to program the communicator by using DLS IV remotely/locally Communicator option [11] Optional Carrier and SIM Lock Lock the unit to a specific carrier’s network Lock the unit to a SIM card with a specific PIN number NOTE: This feature is available upon request of specific carrier networks. Public APN Use Public APN for DLS session if the communicator is operating on a private APN GPRS Login User Name and Password might be required Communicator option [221] to [223] READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications Other Applications Power Save Mode Extend the battery duration when an AC power loss on control panel Ethernet functionality turned off until a new event need to be transmitted Network Connections LED: OFF Incoming DLS connection will not be possible Hardware Default Reset the programming options to the factory setting (default values) NOTE: Please see details in product manual Software Update Update the firmware through DLS IV locally via PCLINK Update the firmware through DLS IV remotely via Ethernet/Internet (TL265GS only) Communicator option [005]-[6] READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications Other Applications System Information Upload and read the system status by using DLS IV Also readable from WT5500 keypad Firmware version Ethernet IP address Ethernet gateway IP address GRPS IP address SIM number GSM phone number IMEI number MAC address Module Default/Reset READ SCREEN 2-Way Wireless Security Suite

2-Way Wireless Security Suite Applications SIA Report Code Event SIA Data Code SIA Address Field Panel Absent Trouble ET 001 Panel Absent Trouble Restore ER 001 Radio Activation Restore RS 001 Ethernet 1 Test Transmission RP 001 GPRS 1 Test Transmission RP 003 GPRS 2 Test Transmission RP 004 FTC Restore YK 001 Example: Nri0 ET001 N= New Event ri0=Partition/Area identifier ET= Panel Absent Restore 001=Zone 001 NOTE: GPRS 2 Test Transmission will only be sent when two different APNs are programmed. READ SCREEN 2-Way Wireless Security Suite