Tunneling Devices. MotivationMotivation Scaling: some proposed tunneling field effect transistor (TFET) designs do not suffer from short channel effectsScaling:

Slides:



Advertisements
Similar presentations
UTA Noise and Reliability Laboratory 1 Noise Modeling at Quantum Level for Multi- Stack Gate Dielectric MOSFETs. Zeynep Çelik-Butler Industrial Liaisons:
Advertisements

ECE G201: Introductory Material Goal: to give you a quick, intuitive concept of how semiconductors, diodes, BJTs and MOSFETs work –as a review of electronics.
Latent Noise in Schottky Barrier MOSFET
Department of Electronics Semiconductor Devices 25 Atsufumi Hirohata 11:00 Monday, 1/December/2014 (P/L 005)
Integrated Circuit Devices
COMSATS Institute of Information Technology Virtual campus Islamabad
p – n junction barrier height,
Resonant Tunneling Diodes (RTDs) Ni, Man EE 666 Advanced Electronic Devices April 26, 2005.
Doped Semiconductors Group IVA semiconductors can be “doped” by adding small amounts of impurities with more or fewer than 4 valence electrons. e.g. add.
Resonant Tunneling Diodes Johnny Ling, University of Rochester December 16 th, 2006.
Xlab.me.berkeley.edu Xlab Confidential – Internal Only EE235 Carbon Nanotube FET Volker Sorger.
© Digital Integrated Circuits 2nd Devices Digital Integrated Circuits A Design Perspective The Devices Jan M. Rabaey Anantha Chandrakasan Borivoje Nikolic.
Digital Integrated Circuits A Design Perspective
Full-band Simulations of Band-to-Band Tunneling Diodes Woo-Suhl Cho, Mathieu Luisier and Gerhard Klimeck Purdue University Investigate the performance.
Single-electron Devices Speaker: Qiaoyan Yu ECE
Reading: Finish Chapter 6
Tunneling Devices Dane Wheeler April 19, 2005 Dane Wheeler April 19, 2005 EE666 – Advanced Semiconductor Devices.
Introduction to CMOS VLSI Design Nonideal Transistors.
Lecture 7: Power.
1 Figure Class AB output stage. A bias voltage V BB is applied between the bases of Q N and Q P, giving rise to a bias current I Q given by Eq. (14.23).
Semiconductor Devices III Physics 355. Transistors in CPUs Moore’s Law (1965): the number of components in an integrated circuit will double every year;
Modern VLSI Design 3e: Chapter 2 Copyright  1998, 2002 Prentice Hall PTR Topics n Derivation of transistor characteristics.
Network for Computational Nanotechnology (NCN) UC Berkeley, Univ.of Illinois, Norfolk State, Northwestern, Purdue, UTEP Homo-junction InGaAs Band-to-band.
EE466: VLSI Design Power Dissipation. Outline Motivation to estimate power dissipation Sources of power dissipation Dynamic power dissipation Static power.
MOS Capacitors MOS capacitors are the basic building blocks of CMOS transistors MOS capacitors distill the basic physics of MOS transistors MOS capacitors.
Copyright © Houghton Mifflin Company. All rights reserved. 16a–1 Figure 16.31: Two-dimensional representations of (a) a quartz crystal and (b) a quartz.
The Devices Digital Integrated Circuit Design Andrea Bonfanti DEIB
ECE 662 Microwave Devices Microwave Materials, Diodes and Transistors February 3, 2005.
Device Physics – Transistor Integrated Circuit
Chapter 5: Field Effect Transistor
Junctions and Semiconductors Theories and practical devices.
Electrical Resistance and Ohm’s Law Electric circuits are used to convert electrical energy into some other form of energy we need.
Basic MOSFET I-V characteristic(1/3) High circuit operation speed  large I ON small Subthreshold Slope (SS) Low power consumption  small I OFF (Silicon-on-insulator.
Quantum Tunneling Tyler Varin, Gereon Yee, & Sirage Siragealdin Dr. Younes Ataiiyan May 12, 2008.
Avalanche Transit Time Devices
Introduction to FinFet
Modern VLSI Design 3e: Chapter 2 Copyright  1998, 2002 Prentice Hall PTR Topics n Derivation of transistor characteristics.
Barcelona, 31 May- 2 June Contacts to High-Resistivity Semiconductors Arie Ruzin School of EE, Faculty of Engineering, Tel Aviv University, Israel.
Chapter Intrinsic: -- case for pure Si -- # electrons = # holes (n = p) Extrinsic: -- electrical behavior is determined by presence of impurities.
ENE 311 Lecture 9.
Junction Capacitances The n + regions forms a number of planar pn-junctions with the surrounding p-type substrate numbered 1-5 on the diagram. Planar junctions.
1 of xx Klein Tunneling PHYS 503 Physics Colloquium Fall /11 Deepak Rajput Graduate Research Assistant Center for Laser Applications University of.
Memory Aid “a hairpin is lighter than a frying pan” light m * (larger d 2 E/dK 2 ) heavy m * (smaller d 2 E/dK 2 )
Field Effect Transistors
TUNNEL DIODE (Esaki Diode) It was introduced by Leo Esaki in Heavily-doped p-n junction –Impurity concentration is 1 part in 10^3 as compared to.
EE141 © Digital Integrated Circuits 2nd Devices 1 Lecture 5. CMOS Device (cont.) ECE 407/507.
1 Detectors RIT Course Number Lecture N: Lecture Title.
Region of possible oscillations
EE141 © Digital Integrated Circuits 2nd Devices 1 Lecture 6. CMOS Device (cont) ECE 407/507.
Conductors – many electrons free to move
 P-N Junction Diodes  How do they work? (postponing the math) Chap. 5.2.
 P-N Junction Diodes  Current Flowing through a Diode I-V Characteristics Quantitative Analysis (Math, math and more math)
HO #3: ELEN Review MOS TransistorsPage 1S. Saha Long Channel MOS Transistors The theory developed for MOS capacitor (HO #2) can be directly extended.
Putting Electrons to Work Doping and Semiconductor Devices.
Introduction to Semiconductors
EE141 © Digital Integrated Circuits 2nd Devices 1 Digital Integrated Circuits A Design Perspective The Devices Jan M. Rabaey Anantha Chandrakasan Borivoje.
Z. Feng MTU EE4800 CMOS Digital IC Design & Analysis 6.1 EE4800 CMOS Digital IC Design & Analysis Lecture 6 Power Zhuo Feng.
Nano-Electronics and Nano- technology A course presented by S. Mohajerzadeh, Department of Electrical and Computer Eng, University of Tehran.
Spencer/Ghausi, Introduction to Electronic Circuit Design, 1e, ©2003, Pearson Education, Inc. Chapter 2, slide 1 Introduction to Electronic Circuit Design.
Nanoelectronics Part II Single-Electron and Few-Electron Phenomena and Devices Chapter 6 Tunnel Junctions and Applications of Tunneling
EMT 112/4 ANALOGUE ELECTRONICS 1 Power Amplifiers Syllabus Power amplifier classification, class A, class B, class AB, amplifier distortion, class C and.
: Prepared By : Name :Trushali mistry Enroll. No. : Branch : E.C. Sem. : 3 rd Guided By : 1. Hiren Patel 2. Sandip Gajera.
SEMICONDUCTOR ELECTRONICS. situation when two hydrogen atoms are brought together. interaction between the electrostatic fields of the atoms split each.
More Applications of PN Junction
EE141 Chapter 3 VLSI Design The Devices March 28, 2003.
Tunnel field-effect transistor
Lecture 13: Part I: MOS Small-Signal Models
Digital Integrated Circuits 10: Short-Channel MOSFETs
Device Physics – Transistor Integrated Circuit
Device Physics – Transistor Integrated Circuit
Presentation transcript:

Tunneling Devices

MotivationMotivation Scaling: some proposed tunneling field effect transistor (TFET) designs do not suffer from short channel effectsScaling: some proposed tunneling field effect transistor (TFET) designs do not suffer from short channel effects Power Dissipation: TFETs can beat the 60 mV/decade sub-threshold swing of MOSFETsPower Dissipation: TFETs can beat the 60 mV/decade sub-threshold swing of MOSFETs Design Flexibility: Circuits can be made with fewer devicesDesign Flexibility: Circuits can be made with fewer devices Scaling: some proposed tunneling field effect transistor (TFET) designs do not suffer from short channel effectsScaling: some proposed tunneling field effect transistor (TFET) designs do not suffer from short channel effects Power Dissipation: TFETs can beat the 60 mV/decade sub-threshold swing of MOSFETsPower Dissipation: TFETs can beat the 60 mV/decade sub-threshold swing of MOSFETs Design Flexibility: Circuits can be made with fewer devicesDesign Flexibility: Circuits can be made with fewer devices

Obligatory Moore’s Law Reference human brain in 2012?

What’s so great about a tunneling device? Lower sub-threshold swing can allow for lower operating voltages to be usedLower sub-threshold swing can allow for lower operating voltages to be used Negative differential resistance (NDR) properties can be exploited to create simpler designs for bi-stable circuits, differential comparators, oscillators, etc.Negative differential resistance (NDR) properties can be exploited to create simpler designs for bi-stable circuits, differential comparators, oscillators, etc. Leads to chips that consume less powerLeads to chips that consume less power Lower sub-threshold swing can allow for lower operating voltages to be usedLower sub-threshold swing can allow for lower operating voltages to be used Negative differential resistance (NDR) properties can be exploited to create simpler designs for bi-stable circuits, differential comparators, oscillators, etc.Negative differential resistance (NDR) properties can be exploited to create simpler designs for bi-stable circuits, differential comparators, oscillators, etc. Leads to chips that consume less powerLeads to chips that consume less power

TunnelingTunneling Tunneling is a quantum mechanical phenomenon with no analog in classical physicsTunneling is a quantum mechanical phenomenon with no analog in classical physics Occurs when an electron passes through a potential barrier without having enough energy to do soOccurs when an electron passes through a potential barrier without having enough energy to do so Tunneling is a quantum mechanical phenomenon with no analog in classical physicsTunneling is a quantum mechanical phenomenon with no analog in classical physics Occurs when an electron passes through a potential barrier without having enough energy to do soOccurs when an electron passes through a potential barrier without having enough energy to do so

(Esaki) Tunnel Diode (TD) Simplest tunneling deviceSimplest tunneling device Heavily-doped pn junctionHeavily-doped pn junction –Leads to overlap of conduction and valence bands Carriers are able to tunnel inter-bandCarriers are able to tunnel inter-band Tunneling goes exponentially with tunneling distanceTunneling goes exponentially with tunneling distance –Requires junction to be abrupt Simplest tunneling deviceSimplest tunneling device Heavily-doped pn junctionHeavily-doped pn junction –Leads to overlap of conduction and valence bands Carriers are able to tunnel inter-bandCarriers are able to tunnel inter-band Tunneling goes exponentially with tunneling distanceTunneling goes exponentially with tunneling distance –Requires junction to be abrupt ECEC EVEV EFEF

Band-to-Band Tunneling in a Tunnel Diode ECEC EVEV EFEF I V (a) (b) (c) (d) (e) (a) (b) (c) (d) (e)

Figures of Merit I V Peak current 100 kA/cm 2 Peak-to-Valley Ratio (PVR)

Bi-stable Configuration I V D2D2 D1D1 X V X1X1 X2X2

TD Differential Comparator M1M1 M2M2 I TAIL  V EE V CC M4M4 M3M3 V OUT RLRL I1I1 I2I2 RLRL CK V IN D1D1 D3D3 D2D2 D4D4 X

Direct vs. Indirect Tunneling Direct Indirect Indirect materials require phonons to tunnel, thus reducing the probability of a tunneling event

Tunnel Current Expressions