1.  P-N Junction Diodes  Current Flowing through a Diode I-V Characteristics Quantitative Analysis (Math, math and more math)

2. p-n Junction I-V Characteristics
In Equilibrium (no bias)
Total current balances due to the sum of the individual components
no net current!
Electron Drift
Current
Electron Diffusion
Current
Hole Drift
Current
Hole Diffusion
Current

3. p-n Junction I-V Characteristics
In Equilibrium (no bias)
Total current balances due to the sum of the individual components
n vs. E
p-Type Material
n-Type Material
- qVBI EC EV EF Ei + + + + + + + + + + + + + + + + + + + EC EV EF Ei
p vs. E
no net current!

4. p-n Junction I-V Characteristics Lowering of potential hill by VA
Forward Bias (VA > 0)
Electron Diffusion
Current IN
Electron Drift
Current
Current flow is proportional to e(Va/Vref) due to the exponential decay of carriers into the majority carrier bands
surmount potential barrier
Lowering of potential hill by VA VA
Hole Diffusion
Current
Hole Drift
Current IP
Current flow is dominated
by majority carriers flowing
across the junction and
becoming minority carriers I

5. p-n Junction I-V Characteristics Increase of potential hill by VA
Reverse Bias (VA < 0)
Increase of potential hill by VA
Electron Drift
Current
Current flow is constant due to thermally generated carriers swept out by E fields in the depletion region
Electron Diffusion Current negligible due to large energy barrier
Hole Diffusion Current negligible due to large energy barrier
Current flow is dominated by minority carriers flowing across the junction and becoming majority carriers
Hole Drift Current

6. p-n Junction I-V Characteristics
Where does the Reverse Bias Current come from?
Generation near the depletion region edges “replenishes” the current source.

7. p-n Junction I-V Characteristics
Putting it all together
-I0
for Ideal diode
Vref = kT/q

8. p-n Junction I-V Characteristics
Diode Equation
 : Diode Ideality Factor

9. Quantitative p-n Diode Solution
Assumptions:
1) Steady state conditions
2) Non- degenerate doping
3) One- dimensional analysis
4) Low- level injection
5) No light (GL = 0)
Current equations:

10. Quantitative p-n Diode Solution
Application of the Minority Carrier Diffusion Equation
Quisineutral Region
minority carrier diffusion eq.
minority carrier diffusion eq.
Since electric fields exist in the depletion region, the minority carrier diffusion equation does not apply here.

11. Quantitative p-n Diode Solution
Quisineutral Region
quasi-Fermi levels formalism

12. Equilibrium Non-Equilibrium Quasi - Fermi Levels
The Fermi level is meaningful only when the system is in thermal equilibrium.
The non-equilibrium carrier concentration can be expressed by defining Quasi-Fermi levels Fn and Fp .
Equilibrium
Non-Equilibrium

13. Quantitative p-n Diode Solution
Quisineutral Region
quasi-Fermi levels formalism

14. Quantitative p-n Diode Solution
Quisineutral Region ?

15. Quantitative p-n Diode Solution
Quisineutral Region
x”=0
x’=0
Approach:
Solve minority carrier diffusion equation in quasineutral regions.
Determine minority carrier currents from continuity equation.
Evaluate currents at the depletion region edges.
Add these together and multiply by area to determine the total current through the device.
Use translated axes, x  x’ and -x  x’’ in our solution.

16. Quantitative p-n Diode Solution
Quisineutral Region
x”=0
x’=0
Holes on the n-side

17. Quantitative p-n Diode Solution
Quisineutral Region
x”=0
x’=0
Holes on the n-side

18. Quantitative p-n Diode Solution
Quisineutral Region
x”=0
x’=0
Similarly for electrons on the p-side…

19. Quantitative p-n Diode Solution
Quisineutral Region
Depletion Region
Continuity equation
Negligible thermal R-G implies Jn and Jp are constant throughout the depletion region. Thus, the total current can be define in terms of only the current at the depletion region edges.

20. Quantitative p-n Diode Solution
Continuity Equations

21. Quantitative p-n Diode Solution
Quisineutral Region
x”=0
x’=0
Total on current is constant throughout the device.
Thus, we can characterize the current flow components as… J
-xp xn

22. pn-junction diode structure used in the discussion of currents
pn-junction diode structure used in the discussion of currents. The sketch shows the dimensions and the bias convention. The cross-sectional area A is assumed to be uniform.

23. Hole current (solid line) and recombining electron current (dashed line) in the quasi-neutral n-region of the long-base diode of Figure 5.5. The sum of the two currents J (dot-dash line) is constant.

24. Hole density in the quasi-neutral n-region of an ideal short-base diode under forward bias of Va volts.

25. The ratio of generation-region width xi to space-charge-region width xd as a function of reverse voltage for several donor concentrations in a one-sided step junction.

26. The current components in the quasi-neutral regions of a long-base diode under moderate forward bias: J(1) injected minority-carrier current, J(2) majority-carrier current recombining with J(1), J(3) majority-carrier current injected across the junction. J(4) space-charge-region recombination current.

27. (d) Adapted from [8]. Current-voltage characteristic for a diode near the boundary between (a) and (c), showing diffusion current at lower voltages and a transition to thermionic-emission current at higher biases.

28. Current in a Heterojunction

29. (a) Transient increase of excess stored holes in a long-base ideal diode for a constant current drive applied at time zero with the diode initially unbiased. Note the constant gradient at x = xn as time increases from (1) through (5), which indicates a constant injected hole current. (Circuit shown in inset.) (b) Diode voltage VD versus time.

30. (a) Transient decay of excess stored holes in a long-base ideal diode
(a) Transient decay of excess stored holes in a long-base ideal diode. In the case shown, the initial forward bias applied through the series resistor is abruptly changed to a negative bias at time t = 0. (Circuit shown in inset.) (b) Diode current ID versus time.

31. Junction and Free-Carrier Storage

32. Quantitative p-n Diode SolutionJ e l c x n - r g i o = + h S C L M t y a d f u s j T W – p
The total current anywhere in the device is constant.
Just outside the depletion region it is due to the diffusion of minority carriers.

33. Quantitative p-n Diode Solution
Thus, evaluating the current components at the depletion region edges,
we have…
J = Jn (x”=0) +Jp (x’=0) = Jn (x’=0) +Jn (x”=0) = Jn (x’=0) +Jp (x’=0)

Ideal Diode Equation
Shockley Equation
Note: Vref from our previous qualitative analysis equation is the thermal voltage, kT/q

34. Current-Voltage Characteristics of a Typical Silicon p-n Junction

35. Quantitative p-n Diode Solution
Examples
Diode in a circuit