Uli Schäfer JEM1 In input modules T,S probably mix of φ-bins 5,6 due to routing problems of high-speed LVDS links With current algorithm rounding errors will lead to dependency of the response on channel mapping… Modify algorithm
Uli Schäfer Algorithms (RTDP) Minor modifications to energy sum algorithm due to re-partitioning on JEM1: Receive energies 4×8 ×(e/h) plus overlap (total 88 ch.) Synchronisation, parity, mask Generate jet elements E T =E e +E h, Saturate jet elements at 1 TeV, send to jet 5- bit wide From jet elements calculate E X and E Y by multiplying cosφ, sinφ (accuracy: 10bit E T ×12-bit coefficient -> 12-bit (.25 GeV resolution)) Threshold (E X,E Y ), E T Pre-sum E X, E Y and E T : 12 jet elements (JEM0:4) Truncate to 1GeV resolution Saturate at 4 TeV Send to sum 40Mb/s (JEM0:80Mb/s) : 12&14&14 bit Final summation over 3 partial sums (JEM0:8) Truncate to 1GeV resolution Quad-linear encoding of energies (8 bit, 4 TeV range) Saturation (4TeV) Parity
Uli Schäfer H/W Status & Plans Status MZ / HD joint tests on Dec. 10: Analogue signals successfully sent through PPr and JEM, captured in spy memories. RAL remote JEM/ROD test on Dec. 16 (to be continued). No success so far, G-link /DAV received on ROD though no data sent After installation of new Cadence release, JEM1 design progressing well. Hope to have the PCB design ready for submission ~Jan. 6/7 PCB and assembly : order out (~16.8 K€) Plans: Continue Mainz tests of energy and integrated (J/E) algorithms. Jitter tests / track down G-link problems another RAL test ~ Jan 13 –ROD Set up stand-alone test bench for input processors ( Andrey) to have well-tested daughter modules when JEM1 arrives Keep JEM0s up and running through first stage of slice test