Cover Page The cover page ToC will open the needed forms for your releases. Red fields are mandatory and also auto fill other areas through out the forms.

Design Release’s Design releases are for full jobs not for S/W/R jobs. Please use the appropriate form. The final Release Package is a checklist meant to verify that you have provided all the information needed to complete the job. What departments need to be notified?

Blanket Documentation needed Blanket Test needed Load rating has been changed so you now have to pick from the drop down, this should help reduce the number of errors when a GM job is released with the wrong capacity and weight. Individual test & Documentation Quality Release

This section on a rework or warranty doesn’t always have to be filled out even if it is ford, the other section can be used to call out the specific test or cert needed to be done. Test needed Test documentation not always needed on R/S/W Quality Release

Service class: 0 = 0-20,000 1 = 20, ,000 2 = 100, ,000 3 = 500,001-2,000,000 4 over 2,000,000 Service class: 0 = 0-20,000 1 = 20, ,000 2 = 100, ,000 3 = 500,001-2,000,000 4 over 2,000,000 Design Category two choices: A = slow or low- cycle operations B = high cycle counts Design Category two choices: A = slow or low- cycle operations B = high cycle counts Tag information goes here this is what the customer see’s at the plant wrong or missing information here makes us look bad. Quality Release Design Category two choices: A = slow or low- cycle operations A can only = 0 B = high cycle counts. B can now only have values of 1-4 Design Category two choices: A = slow or low- cycle operations A can only = 0 B = high cycle counts. B can now only have values of 1-4

Color is now the default field with a mandatory entry unless N/A is selected. All details or parts needed to complete the task needs to be here, from detail #’s to taps and bolts. The description is needed to let the builder know what is expected. Re-work, Spare parts or Warranty Job’s should have the prefix of S/R/W on the cover page so all documents will have the same tool number showing Spare Part/Re-Work/ Warranty Release Here we explain why we are doing this, was it a customer change or our fault, this helps us to track the why’s.

SIMO Simo builds must have this form to accompany the release with the basic information filled out. SIMO builds need at least a hand sketch and a sequence of operation.

Forget Something? This is the error msg. you always ignore that’s letting you know you should not proceed with saving or printing.

Hit list Pdf’s being over written, need to save as. Information is being lost or incorrect. i.e.: wrong ship dates, balancer missing from release… Station layouts needed even if it’s a hand sketch. Have P.O. request in same format as strippits/waterjet. Round weights up.