Chicago Clamp Company Manufacturing Structurally Sound and Cost Effective Solutions for Roof Opening and Joist Loading Projects

Chicago Clamp Systems® Standardize specifications No Welding and No Drilling -welding hazards are eliminated -reduction in labor costs -reduction in installation schedules Adaptable for last minute changes

Chicago Clamp Systems The New Standard Framing Clamp System Frames roof openings and supports loads above or below the roof deck Suspension Clamp System Enables simple, quick installation for hanging loads between joists. Use to form a Panel Point Bridge to distribute loads to panel points 4

Traditional Angle Frame Methods

Framing Clamp Systems System is perfect for framing roof openings Installed directly beneath corrugated roof decking 250lb, 750lb or 1000lb Capacity per end clamp Ideal for installation of exhaust fans, sky lights, rooftop units, vents, etc 6

Framing Clamp Systems New 3 Inch Tube Framing Clamp System 250lb Clamp Cap. Designed for light duty openings Tested for uplift and download 1,000lb Distributed load capacity Standard System Joist Grip System 750lb Clamp Cap. 1,000lb Clamp Cap. Ideal framing for most applications Installed in less than 90 minutes 3,000lb Distributed load capacity Tested for uplift conditions Backed by Florida Product Approval 4,000lb Distributed load capacity

Framing Clamp Systems End Clamp slides over the top of the joist Maximum width of joist flange is 9” for the 4x2 system and 7” for the 3x2 system Fits with most standard corrugated decking 8

Specs on Traditional Methods

Some specifications will call out for the deck to be cut unnecessarily. Others will specify that angles be welded vertically to compensate for loads falling short of panel points.

Standardized Connections

Support for rooftop equipment

Framing for skylight opening

Top Chord Hanger Clamp

Installation Video Links Framing Clamp Systems Installation Video Links - Link for Install Demonstration https://www.youtube.com/watch?v=f9Z8-2GaHKc - Link for Install Animation https://www.youtube.com/watch?v=0tOt0AYu6NA Other videos and demonstrations can be found under the ‘Downloads’ tab on our website – www.ChicagoClampCompany.com 15

Chicago Clamp Systems The New Standard Framing Clamp Systems Frames roof openings and supports loads above or below roof deck Suspension Clamp System Enable simple & quick installation for hanging loads between joists. Use to form a Panel Point Bridge to distribute loads to panel points.

Suspension Clamp System Suspension Clamps hold back to back angles Midspan clamps allow for 5/8” threaded rod Systems can be bolted in strategic locations along joists

Panel Point Bridge Suspension Clamps used to form a Panel Point Bridge for mid-span loads Assists with the transfer of mid-span loads to the lower chord panel points Ideal for hanging equipment, pipes, roof panels, or HVAC units

Suspension Clamp System Flexibility in suspension hardware Load Chart for easy support selection of up to 2,000 lbs. Ideal for ceiling fixtures, conveyors, or HVAC units

Meticulously Engineered & Rigorously Tested Independent Laboratory Testing - Milwaukee School of Engineering - Farabaugh Engineering and Testing Computerized Structural Design

Meticulously Engineered & Rigorously Tested Laboratory Testing Computerized Structural Design

“The guys in the field, they loved that system and it went very well “The guys in the field, they loved that system and it went very well.” – TOTAL Mechanical, Pewaukee WI “Each set-up was easy to install and went up quicker than expected.” – ARAMARK, Toledo OH “Installation was a breeze and rooftop is in place. My people really liked the quality of your product and made sure to let me know they prefer this method of support in lieu of all that goes into welding, fire watch, tarp protection and such.” – All Seasons Mechanical, Syracuse NY “Your frame set-up worked perfectly for our application.” – icon Mechanical, Granite City IL “Your system is so much easier than welding steel framework , there is no comparison. Most of our work is service related, in operating buildings, we can come in on a weekend, install your system and have the new a/c running by Monday with no “Hot work”, or disturbance of the office. This capability has landed us jobs!” – Airite Air Conditioning, Tampa FL

Chicago Clamp Systems® Standardize specifications No Welding Required No Specialized Tools Required Easy Installation and Removal Relocates Easily to Meet Changing Needs Reduces Cost and Shortens Install Schedule