1. 1 How to start the Online Labs module ?

2. 22 System Requirement for doing Online Labs Before you start your course, make sure that you have following system requirements: In order to be able to use the Lab Console, your system needs to have Java installed. Make sure you have the latest Java installed. If you don’t have Java you can download it from https://java.com/en/download/index.jsp Disable popup blocker on your browser. Our system works best with Google Chrome. Broadband Internet connection with decent speed. Decent means if you can watch a You Tube video on your broadband connection you can use our labs as well. Anything less than that will make things jittery.

3. 33 Step 1 – Go to Login Go to www.cognitel.com. Click on LOGIN at the top of the webpage

4. 44 Step 2 – Enter Login Details A popup will open. Enter your registered Email ID as username and Password sent to you in the email.

5. 55 Step 3 – My Courses Once you have successfully logged in, click My Courses link on the top of the webpage.

6. 66 Step 4 – Go to Dashboard On clicking my courses your course dashboard will appear. The Labs enrolled would be listed under Online Labs category on this page.

7. 77 Step 5 – Schedule your Lab Schedule your lab by clicking Schedule Now:

8. 88 Step 6 – Check the available time A pop will appear upon clicking Schedule Now. Choose your time zone and preferred date of access and click on Check Availability:

9. 99 Step 7 – Select Start Time Slot of the Lab You would be required to select the preferred start time of your lab. Select the START TIME SLOT and click on CONFIRM SELECTION.

10. 10 Step 8 – Time Left to Start The Access VLab column in Dashboard will show TIMER with time left for the module to start.

11. 11 Step 9 – Launch the Lab Wait until the scheduled time till the timer become 0 min 0 Sec and Launch VLab link appears. NOTE: Please refresh the webpage if LAUNCH VLAB link is not available at your scheduled time.

12. 12 Step 10 – Lab Console Load Launch VLab will open a popup as shown below. Please wait for 3-5 minutes for “Java” to load. Once the Java is loaded, Java icon shown above will disappear and Lab Console will open.

13. 13 Step 11 – Allow Java access A WebRDP prompt will ask your consent to open the application. Select “I accept the risk and want to run this application” and click on Run

14. 14 Step 12 - Wait for Console to Open Please wait for 1-2 minutes and the Lab console panel as shown below will automatically open. You can use this remote desktop to use the lab equipment as per your course.

15. 15 Step 13 – Open Instructions A window with all the step by step instructions on the tasks to be done in the lab would automatically appear. However if your browser has pop blocker enabled, this window may not be visible. Click on Module Instructions tab to open the Lab Instructions.

16. 16 Step 14 – Start your Lab course You can have parallel access to instructions and lab console and complete you lab module.

17. 17 Finish the Lab And that’s it!! You are good to experience the world’s greatest telecom labs online. Please make sure to leave us a feedback at the end of the course to help us improve the learning experience for the students. Happy Learning!! If you still can’t figure out, write to us at support@cognitel.com. You can also call us at +91-9540956161support@cognitel.com

18. 18 www.cognitel.com THANK YOU